** Changed in: dracut (Ubuntu)
Status: New => Confirmed
** Changed in: systemd (Ubuntu)
Status: New => Confirmed
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/2100296
Title:
Double in
** Also affects: systemd (Ubuntu)
Importance: Undecided
Status: New
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/2100296
Title:
Double initrd in /efi/// with systemd-boot
To manage notif
Public bug reported:
With the combination of using dracut and systemd-boot from plucky-
proposed I get two initrds copied to the EFI partition:
/efi/2504a9c37a434fc28843779e4d0b34eb/6.14.0-5-generic
/efi/2504a9c37a434fc28843779e4d0b34eb/6.14.0-5-generic/linux
/efi/2504a9c37a434fc28843779e4d0b34eb
The suggestion from Igor finally worked although not right away in my
case :)
These two:
sudo apt install --only-upgrade ubuntu-release-upgrader-core
sudo apt dist-upgrade --allow-downgrades
Managed, probably, to get the system past the error of this ticket but
afterwards I wasn't able to login
I can confirm the same issue. After upgrading to 24.04.1 from 22.04.5
Discover shows about 1400 packages need to be updated again. When trying
to update the all, I get this error:
WARNING: You are trying to remove the following essential packages:
libapt-pkg6.0 (due to apt) libgnutls30 (due to apt
This issue still manifests in 2024-09, on Kubuntu 24.04.1 LTS installed
on an HP Z440 workstation. :-(
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1752772
Title:
r8169 ethernet card don't work aft
Public bug reported:
Apply patches from the PIC64GX kernel repository on GitHub to support
the Microchip PIC64GX Curiosity Kit
** Affects: linux-riscv (Ubuntu)
Importance: Undecided
Status: New
** Summary changed:
- Enable PIC64GX Curiosity Kit
+ Enable Microchip PIC64GX Curiosity
For all previous kernels and the 6.8.0-31-generic in Noble detection
have been an issue. As long as the cable is attached at boot it does
work.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/2038933
Ti
Public bug reported:
Apply relevant patches to the linux-riscv kernel to support the Milk-V
Mars board based on the StarFive JH7110 SoC.
** Affects: linux-riscv (Ubuntu)
Importance: Undecided
Status: New
--
You received this bug notification because you are a member of Ubuntu
Bugs
I'm also experiencing this issue, although my keyring still exists under
~/.local/share/keyrings/login.keyring and after authenticating using the
popup after logging in, all my passwords can be seen when starting
"seahorse". The only problem I'm experiencing is that the keyring
doesn't automaticall
That's --daylog (which records bytes in/out per day), what you want is
--syslog (which will hopefully record some kind of error, and will end
up in /var/log/messages or similar)
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://b
The child process is expected, it's used for DNS resolution (so as not
to block the main process, which is a select() loop)
Please run with --syslog and see if there's a smoking gun in the logs
when darkstat stops.
--
You received this bug notification because you are a member of Ubuntu
Bugs, wh
I don't think darkstat is the right package, darkstat isn't a GUI app.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1964121
Title:
onboard can not type in some input boxes
To manage notifications
Public bug reported:
I am not enough into ubuntu to explain what happend
ProblemType: Bug
DistroRelease: Ubuntu 18.04
Package: ubiquity 18.04.14.14
ProcVersionSignature: Ubuntu 5.3.0-28.30~18.04.1-generic 5.3.13
Uname: Linux 5.3.0-28-generic x86_64
ApportVersion: 2.20.9-0ubuntu7.9
Architecture: a
Found it - https://github.com/Koenkk/zigbee2mqtt/issues/8663
** Bug watch added: github.com/Koenkk/zigbee2mqtt/issues #8663
https://github.com/Koenkk/zigbee2mqtt/issues/8663
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://b
Same issue under 5.4.0-89 kernel. Tested about 10 different boards,
those ones based on ch340G does not work. Ones using ch340C or ch340K
DOES work (mostly esp32 boards).
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.lau
Public bug reported:
When I use my mouse to select an area on the desktop by holding down the left
mouse bottom, the area being highlighted is off from where my mouse actually is.
This issue appeared right after upgrading to 21.04
Release of ubuntu being used: Ubuntu 21.04
ProblemType: Bug
Dist
I also got hit by this bug when trying to install Ubuntu 21.04. I want
to install Ubuntu on a separate USB memory I have plugged into my
computer, but couldn't get past this step.
Thankfully ubiquity is written in Python so I could easily in my Live
session go to /usr/lib/ubiquity/plugins/ubi-prep
Two processes is normal (the child process is to do non-blocking DNS
resolution).
Mytonn is there anything relevant in the syslog?
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/249038
Title:
darkst
Exacly the same issue on same Dell 3593, issue persist also on Linux
Mint 20.04 (guess because it is based on Ubunu 20.04). Latest kernel.
Sometimes solved by enabling / disabling secure boot. Other times boot
order Ubuntu/SSD, SSD/Ubuntu, unchecking SSD. Using recover kernel 5.40
mode/update grub
Olivier, it's not the webaudio that does not work. It's the webmidi.
As in the 2 last examples on the demo list:
https://ryoyakawai.github.io/smfplayer/
http://webaudiodemos.appspot.com/MIDIDrums/index.html
In my testing the drum machine doesn't ask for permission to use midi.
So that might be a
I removed all extensions, an this seems to solve the problem.
I then reinstalled my extensions one by one.
The extension causing the problem seems to be: NordVPN Connect by poilrouge.
When running "NordVPN Connect", error only occurs after screen lock and wake up.
When error occurs, there are no er
Public bug reported:
System works fine util Suspend.
After wake up from Suspend video on display stutters.
Video (e.g. in browser) freezes approximately once every second, and freeze
lasts for about 100 millisecond.
If you drag an icon or a window over the desktop, the icon will stutter, but
the
Are there any official announcements of why they don't want to follow
the XDG standards?
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1575053
Title:
Please move the "$HOME/snap" directory to a less
agpmode and modeset are not even remotely related I'm afraid. With 4.3
onward one should be using nouveau.config="NvAGP=0" as documented [1]
[1] http://nouveau.freedesktop.org/wiki/KernelModuleParameters/#config
--
You received this bug notification because you are a member of Ubuntu
Bugs, which
I'm also getting this error on every boot on my Dell XPS 13 (Model 9380)
with Ubuntu 19.10. It has all updates installed. The error also shows up
after sleep and at apparently random times as well.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed
Glad you got it resolved. ;)
The only other thing I can think of is that it sometimes fails to start
at boot because of an ordering/timing problem (i.e. listening on an
interface before it's up'd). Make darkstat log to syslog, reboot, and
examine the syslog.
--
You received this bug notification
Ok so after boot what does "systemctl status darkstat" say? Because in
#4 it was running with no errors.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1839492
Title:
Bad test for $START_DARKSTAT in
Apparently "bad" just means it's not a native systemd service.
So it doesn't start on boot? And it doesn't start on "systemctl start
darkstat"?
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1839492
T
What shows up on the console + in "journalctl -f" + in syslog when you
run:
systemctl start darkstat
systemctl status darkstat.service
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1839492
Title:
B
Shouldn't:
test "$START_DARKSTAT" = "yes" || exit 0
Mean "variable has to equal yes or else early exit" ?
$ test "$X" = "yes" || echo early exit
early exit
$ export X=yes; test "$X" = "yes" || echo early exit
$
What am I missing?
--
You received this bug notification because you are a member o
Yes I did recieve a message about using 'ppa-purge'. Although it is very
unclear repository you should purge. I also did try upgrading with
disabling everything under 'Other Sofware' and it still did not work, so
I figured it couldn't have been any of the PPA:s.
But I did as mentioned and the upgr
Public bug reported:
Ubuntu is unable to update with only default repositories.
Description:Ubuntu 18.04.2 LTS
Release:18.04
Expectation:
Complete upgrade to Ubuntu 18.10
What happened:
An unresolvable problem occurred while calculating the upgrade.
ProblemType: Bug
DistroRelease
Public bug reported:
My mouse locks up and the only way out is a remote reboot
ProblemType: Package
DistroRelease: Ubuntu 18.10
Package: libpam-systemd:amd64 239-7ubuntu10.7
ProcVersionSignature: Ubuntu 4.18.0-15.16-generic 4.18.20
Uname: Linux 4.18.0-15-generic x86_64
ApportVersion: 2.20.10-0ubu
Public bug reported:
Ich habe zwei Bildschirme, 1x Laptop, 1x groß stationär
Das Bild vom Laptop wird nur unvollständig auf den 2. Bildschirm
übertragen. Es fehlen z.B. die Zeile für das Passwort zur Anmeldung und
die Möglichkeit durch anklicken den Computer auszuschalten.
ProblemType: Bug
Distr
Public bug reported:
First auto update of the OS since installation an hour earlier.
ProblemType: Package
DistroRelease: Ubuntu 18.10
Package: gettext 0.19.8.1-8
ProcVersionSignature: Ubuntu 4.18.0-10.11-generic 4.18.12
Uname: Linux 4.18.0-10-generic x86_64
ApportVersion: 2.20.10-0ubuntu13.1
Arch
** Description changed:
For nearly a month /from the end of June/ Ubuntu Software Center in
Ubuntu 16.04 shows only snaps - a few editor's picks. There are no
categories and .deb packages. Tab Installed is empty.
- I tried to remove and reinstall gnome-software throug Synaptic Package
+ I
Public bug reported:
For nearly a month /from the end of June/ Ubuntu Software Center in
Ubuntu 16.04 shows only snaps - a few editor's picks. There are no
categories and .deb packages. Tab Installed is empty.
I tried to remove and reinstall gnome-software throug Synaptic Package
manager, deleted
Oh, sorry, which bug should I be following up on?
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1512120
Title:
[SRU] thunar crashes on file renaming
To manage notifications about this bug go to:
ht
Sorry, to be clear: I still see the invalid reads and writes when I'm
dragging and dropping files in the UI.
I tried the loop for renaming files every second and wasn't able to
trigger a crash in thunar with or without the patch.
--
You received this bug notification because you are a member of
Yes, I'm pretty sure I've been able to trigger it with both copy/paste
and drag/drop.
I don't have a reliable way of reproducing it, I manually click around
until I get a crash.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://
Created attachment 6636
Use reference counting to avoid crash in deferred reload
I've got a semi-reliable way of triggering this (two side-by-side
windows, showing two different dirs, a lot of image files, drag and drop
and it crashes)
The attached diff increments the refcount before creating the
Copying from https://bugs.debian.org/cgi-
bin/bugreport.cgi?bug=800723#96:
This is with thunar-1.6.10: (line numbers will be off because I was
adding debug printfs)
thunar_file_info_reload() touches memory deleted by
thunar_folder_reload()
I don't think this is a thread race because I always see
With Check-if-a-thunar-file-is-still-valid-before-reloading.patch, I
still see the invalid reads and writes, but not the crash on strcmp(NULL
Also, moving ~20 files (drag and drop to another thunar window) feels
very slow now.
--
You received this bug notification because you are a member of Ubu
sudo apt --fix-broken install
seems to fix the problem.
More info here:
https://ubuntu-mate.community/t/upgrade-from-17-10-to-18-04-gone-wrong-could-not-install-menu/16880/15
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bug
Public bug reported:
1/
Bob@Bob-OMEN:~$ uname -a
Linux Bob-OMEN 4.13.0-41-generic #46-Ubuntu SMP Wed May 2 13:38:30 UTC 2018
x86_64 x86_64 x86_64 GNU/Linux
Bob@Bob-OMEN:~$ lsb_release -crid
Distributor ID: Ubuntu
Description:Ubuntu 18.04 LTS
Release:18.04
Codename: bionic
2/
Bo
I agree strongly with David Banks.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1574349
Title:
gitlab install fails on missing gem file
To manage notifications about this bug go to:
https://bugs.l
Public bug reported:
package sia (not installed) failed to install/upgrade: new sia package
pre-installation script subprocess returned error exit status 1
ProblemType: Package
DistroRelease: Ubuntu 18.04
Package: sia (not installed)
ProcVersionSignature: Ubuntu 4.15.0-20.21-generic 4.15.17
Uname
Repository with xserver fix. Works on ubuntu 16.04, 18.04.
https://launchpad.net/~nrbrtx/+archive/ubuntu/xorg-hotkeys
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1725078
Title:
Can't set Ctrl+Shi
Public bug reported:
I just mount NTFS HDD with data and shear with Samba in local network.
ProblemType: Package
DistroRelease: Ubuntu 16.04
Package: samba 2:4.3.11+dfsg-0ubuntu0.16.04.12
ProcVersionSignature: Ubuntu 4.13.0-32.35~16.04.1-generic 4.13.13
Uname: Linux 4.13.0-32-generic x86_64
Appo
Public bug reported:
I got a crash report prompt during installation of 17.10 from USB stick.
I have no idea what was going on when it crashed.
ProblemType: Bug
DistroRelease: Ubuntu 17.10
Package: ubiquity 17.10.10
ProcVersionSignature: Ubuntu 4.13.0-16.19-generic 4.13.4
Uname: Linux 4.13.0-16-g
Sebastien, thanks for the quick response. I found an existing upstream
bug (https://bugzilla.gnome.org/show_bug.cgi?id=788097) which, while
lacking detail, seemed to match. I linked it to this issue.
** Bug watch added: GNOME Bug Tracker #788097
https://bugzilla.gnome.org/show_bug.cgi?id=7880
Public bug reported:
I have installed Ubuntu Server 17.10. At request from a colleague I
then tried to install ubuntu-desktop and enable screen sharing.
However, this did not work as expected. When trying to enable screen
sharing (same goes for file sharing), the enable button just jumps
straigh
I have the same problem:
> x11vnc -usepw
...
03/09/2017 15:17:28 Default visual ID: 0x24
X Error of failed request: BadMatch (invalid parameter attributes)
Major opcode of failed request: 73 (X_GetImage)
Serial number of failed request: 41
Current serial number in output stream: 41
Yesterda
darkstat v2.x used 666
darkstat v3.x used 667
debianhelp has screenshots from v2.6
My guess is Debian overrode the port to 666 when the package was
upgraded from v2 to v3 so as to not change the (Debian) default. :)
--
You received this bug notification because you are a member of Ubuntu
Bugs,
Great, sounds like the distro part is working correctly! What's left to
do in this bug?
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1699374
Title:
localhost:666 connection refused error?
To manag
Sorry about the documentation. I can't change what's in that magazine.
:)
The cfg file is specific to the distro and applies to systemd(?)
starting darkstat at boot time, it's not a standard part of darkstat /
not something it reads at startup.
i.e. Either "service start darkstat" or whatever the
The default webserver port should be 667. Try: "netstat -lntp" while
darkstat is running.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1699374
Title:
connection refused due to pcap error?
To manag
Try: sudo darkstat -i eth0 --debug
The error message could be better, but it's saying there's no interface
called "--debug", which was the argument to -i.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs
Public bug reported:
hi,
it shows (box) when trying to update my 14.04 to 16.
Could not calculate the upgrade
An unresolvable problem occurred while calculating the upgrade.
This can be caused by:
* Upgrading to a pre-release version of Ubuntu
* Running the current pre-release version of Ubun
Public bug reported:
These cards require the wcaxx kernel module, which is available in the
source package, but not built by the given dkms.cfg.
** Affects: dahdi-linux (Ubuntu)
Importance: Undecided
Status: New
--
You received this bug notification because you are a member of Ubu
Public bug reported:
Hi!
Since I upgraded to Ubuntu 16.04 my HDMI-display is not recognized. I'm
on an HP laptop (dv7-1095) with an Nvidia 9600M GT graphics card. Does
anyone know what might cause this problem? :)
Regards
Emil
ProblemType: Bug
DistroRelease: Ubuntu 16.04
Package: xorg
Public bug reported:
Kontact in Kubuntu 16.10 will not start because the Akonadi server will
not start
** Affects: ubuntu
Importance: Undecided
Status: New
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.la
We just installed a fresh X260 for a new coworker.
Can confirm that kernel 4.8.0-040800rc5 works even without
https://github.com/linuxenko/ubuntu-skylake-i915-video-fix
We do still have problems with the Lenovo Pro and Ultra docks. We cannot get
4K@60Hz working using any videooutput on the dock
For anyone needing a quick work-around, see:
http://askubuntu.com/a/842313/582734
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1637058
Title:
nginx-common postinst execution fails when upgrading to
Public bug reported:
It's a major annoyance that the toggle maximization state shortcut does
not return the window to its previous state when continuously pressing
the shortcut key.
It would be nice to see that if I had a window hooked to the right half
of the screen and then toggled it would ret
Now I tried with the newest kernel 4.7.0-994-generic together with an
Xorg.conf.d fix from
https://github.com/linuxenko/ubuntu-skylake-i915-video-fix
It now works almost flawlessly over DP 4K 60hz.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribe
last configuration
because of crash.
I believe it is the combination of 4K display in full resolution *and*
60hz. This would be why the crash is only seen with DP at full
resolution.
last crash report with kernel 4.6.3:
Jul 06 19:32:14 emil-workpad kernel: [ cut here ]
Jul
user (emil) where this annoying behavior did not
occur
with the corresponding
.config/dconf
of the second user (sharon) where the immediate logout after login behavior
occurred
with gnome classic desktop (either compiz or metacity).
I moved sharon's dconf directory out of .config renami
(In reply to joro-2013 from comment #16)
> Allow me to add my experiences.
>
> Whether the colors are garbled on PPC depends on the GL color format used
> (among probably a gazillion other parameters :-). Packed (16-bit) formats
> have been broken on big-endian for some time, they worked fine in m
Martin,
That series of commands works for me. Wifi came back up without any
issues.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1422143
Title:
No wifi connection after suspend with systemd
To ma
Lenovo B50-70 fits the description.
$ arecord -l
List of CAPTURE Hardware Devices
card 1: PCH [HDA Intel PCH], device 0: ALC233 Analog [ALC233 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
I'm on Arch Linux and have tried adding "options snd-hda-intel model=inv-dmic"
in eith
*** This bug is a duplicate of bug 1479913 ***
https://bugs.launchpad.net/bugs/1479913
Public bug reported:
FGLRX driver fails to install
ProblemType: Package
DistroRelease: Ubuntu 15.04
Package: fglrx-core (not installed)
ProcVersionSignature: Ubuntu 3.19.0-26.28-generic 3.19.8-ckt4
Uname:
same.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1448681
Title:
no systray icon in kde plasma 5
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/pidgin/+bu
** Changed in: hp-iss
Status: New => Confirmed
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1386031
Title:
Need HPVSA build for Ubuntu 14.04 kernel 3.13.0-37
To manage notifications about t
The first patch above does nothing to the bring the connection back up
after building my own set of packages. There does seem to be a race
condition of some sort between the supplicant and NM but I'm not able to
track it down appropriately.
I'm attaching my debug logs to this bug report in the hop
An updated for 3.13.0-48 would be greatly appreciated.
It also looks like we're at 3.16.0 with 14.04.2, so an update for that is also
needed.
In the longer term we need a better solution than waiting for HP to recompile
the driver whenever a new kernel is released!
** Also affects: hpvsa (Ubun
Can either of these patches make a difference?
http://cgit.freedesktop.org/NetworkManager/NetworkManager/commit/?id=a687d1f9e0f75b987f40335934b54aa748f6724b
http://cgit.freedesktop.org/NetworkManager/NetworkManager/commit/src/nm-
manager.c?id=5f04324f8bef43ebe831a6fa20ea8577dcad0ac5
--
You rece
After an upgrade through terminal, 1 month ago, this problem disappeared
and now everything works great. Sorry for not marking this bug as solved
earlier. Thank you !
Best regards,
Emil Preda
** Changed in: linux (Ubuntu)
Status: Incomplete => Fix Released
--
You received this
If you can't find section "[Locale en]" and "[Locale pl]" past this ↓
[Locale en]
EditorFont=Sans Serif,12,-1,5,50,0,0,0,0,0
PracticeFont=Sans Serif,16,-1,5,50,0,0,0,0,0
SpellChecker=en
[Locale pl]
EditorFont=Sans Serif,12,-1,5,50,0,0,0,0,0
PracticeFont=Sans Serif,16,-1,5,50,0,0,0,0,0
Enjoy
--
[Locale en]
en → is the abbreviation for the language you are learning.
[Locale pl]
pl → is the abbreviation for the language that you know.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/802896
Title
Everything menu-related in Ubuntu was awful throughout the years. It's
like multiple concurrent failed attempts to come up with something newer
and better (like global menus) when in fact it just produces
inconsistency and removes something that works and people are familiar
with.
Just upgraded to
Hi,
Edit this file /home/emil/.kde/share/config/parleyrc
Find the line containing the word "font" and change the font size.
For example, like this :
[Appearance]
GradeColor=25,140,25
IPAFont=Comic Sans MS,16,-1,5,50,0,0,0,0,0
[Locale en]
EditorFont=Sans Serif,12,-1,5,50,0,0,0,0,0
Pr
I have the same problem but with my ASUS X550LN...
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1376120
Title:
Touch-pad dosen't work after installing Ubuntu 14.04 [Dual boot with
Windows 8]
To
(In reply to comment #11)
> With Gentoo vanilla binutils 2.24-r3 with two slim LTO patches and the patch
> referred by Emil Velikov in Comment #3
>
> https://projects.archlinux.org/svntogit/packages.git/plain/trunk/binutils-2.
> 24-shared-pie.patch?h=packages
/+bug/1286161 .
--Emil
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1314955
Title:
Kubuntu 14.04 upgrade failed
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu
Building OpenCL works like a charm here. Can you try to establish which
(if any) of the following components is responsible - llvm, gcc (*cough*
4.9.2_alpha) binutils or clang.
I'm building it on Archlinux (llvm 3.5.0, gcc 4.9.1 (snapshot
4.9-20140903), binutils 2.24 [1], clang 3.5.0).
[1] The bi
(In reply to comment #4)
> I tested it with LLVM 3.4.2 and the same set of gcc-4.9.2 (svn) and binutils
> (svn) used to open this bug report and all built fine.
It may be that llvm 3.5 + mesa is "using" gcc/binutils in a slightly different
way.
Can you try using the same versions as the one I've l
Public bug reported:
I am using a laptop, HP Compaq 6910P and is running Ubuntu 14.04,
32 bit edition. When I start my laptop the fan is running optimally, my
processor temperature remains at 60 C at idle. If I start using any
intensive program, the temperature raises up to 90 C but the fan i
Public bug reported:
it happends when I start the computer after update
ProblemType: KernelOops
DistroRelease: Ubuntu 14.04
Package: linux-image-3.13.0-23-generic 3.13.0-23.45 [modified:
boot/vmlinuz-3.13.0-23-generic]
ProcVersionSignature: Ubuntu 3.13.0-23.45-generic 3.13.8
Uname: Linux 3.13.0-
Are you sure it's not a hardware issue? This discussion seems to indicate it's
a hardware problem http://www.spinics.net/lists/linux-input/msg28623.html .
Only Windows 8 is for some strange reason not affected.
I do have the same problem with Arch Linux and Windows 7.
--
You received this bug n
Public bug reported:
I have a Sony Vaio VGN-FW250J laptop and the hotkey for suspending (FN +
F12) is mapped as brightness up instead. I followed the instructions on
Ubuntu wiki for troubleshooting hotkeys and found out with the help of
"evtest" that the hotkey is recognized as "Event code 225
(KE
apport information
** Attachment added: "Dependencies.txt"
https://bugs.launchpad.net/bugs/1114370/+attachment/3953433/+files/Dependencies.txt
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1114370
apport information
** Attachment added: "ProcCpuinfo.txt"
https://bugs.launchpad.net/bugs/1114370/+attachment/3953440/+files/ProcCpuinfo.txt
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1114370
apport information
** Attachment added: "Lsusb.txt"
https://bugs.launchpad.net/bugs/1114370/+attachment/3953439/+files/Lsusb.txt
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1114370
Title:
[gm4
apport information
** Attachment added: "XorgLogOld.txt"
https://bugs.launchpad.net/bugs/1114370/+attachment/3953448/+files/XorgLogOld.txt
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1114370
Ti
apport information
** Attachment added: "xdpyinfo.txt"
https://bugs.launchpad.net/bugs/1114370/+attachment/3953450/+files/xdpyinfo.txt
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1114370
Title:
I tested the bug on the latest development version of Ubuntu as you
requested and it is still present. I must mention, though, I was using a
live version of Ubuntu (on usb). If this doesn't work for you, let me
know.
--
You received this bug notification because you are a member of Ubuntu
Bugs, w
apport information
** Attachment added: "UdevLog.txt"
https://bugs.launchpad.net/bugs/1114370/+attachment/3953445/+files/UdevLog.txt
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1114370
Title:
apport information
** Attachment added: "CurrentDmesg.txt"
https://bugs.launchpad.net/bugs/1114370/+attachment/3953432/+files/CurrentDmesg.txt
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1114370
1 - 100 of 555 matches
Mail list logo
