Hi all,
Relavent docs for dummies needed ;)
I've set up using the nfs stuff in kde a shared folder on each of the
two networked pcs. Is there a simple way to connect to those shared
folders? - Some tool or GUI that I can use?
Many thanks..
--
Nick W
--
redhat-list mailing list
unsubscribe m
* and then Parker Morse declared
> "ifconfig" at the command line will display the status and interesting
> data about active interfaces, including the subnet mask. (Also the MAC
> or "HWaddr", IP address, broadcast address, etc. etc.)
>
> "man ifconfig" will give you some interesting "see
* and then Nick White declared
> So you can ping your machine from your wife's, but you cannot ping the
> wife's from yours.
>
> Sounds like a subnet mask issue, or ICMP filtering. Check that the
> subnet masks on both machines match, and try service iptables stop.
Ok, where will i find the
* and then Nick Wilson declared
> Whilst fixing my nvnet driver though, I seem to have lost the network to
> my wifes PC connected via an adsl hub. Earlier I could ping our ip
> address and send/recieve packets but no longer can...
BTW, I can ping my machine from my wifes, (if t
Hi all,
So, I'm connected to the net, and have an x-system (if you've seen my
other posts..).
Whilst fixing my nvnet driver though, I seem to have lost the network to
my wifes PC connected via an adsl hub. Earlier I could ping our ip
address and send/recieve packets but no longer can...
Can som
* and then Nick Wilson declared
> Hi all,
>
> After finally getting my NVIDIA chipset working I upgraded the kernel to
> 2.4.20-20.9 (just installed all errata on rh9) and can no longer bring
> up eth0
>
> I re-patched the new kernel, ran 'make menuconfig
Hi all,
After finally getting my NVIDIA chipset working I upgraded the kernel to
2.4.20-20.9 (just installed all errata on rh9) and can no longer bring
up eth0
I re-patched the new kernel, ran 'make menuconfig' --> the NVIDIA
chipset is indeed there, and enabled. Ran make dep and now when bootin
* and then NfoCipher declared
> Sounds like it didn't install. Try running this:
> http://download.nvidia.com/XFree86/Linux-x86/1.0-4496/NVIDIA-Linux-x86-1.0-4496-pkg2.run
> Pretty much automates the process.
Goddamit! - Why couldn't I just have found that in the first place?
Shhsh! So s
* and then Nick Wilson declared
> > Comment out the DRI line and change driver "nv" to "nvidia".
> > Save, restart x, there ya go.
>
> Right! - I've got 'vesa' as the driver and when I've changed to nvidia
> before it says
* and then NfoCipher declared
> > * GeForce FX 5200 on a A7N8X-X
> >
> > I downloaded the nforce tarball (as I wasn't sure of the kernel type for
> > rpm with a default RH9 install (didn't match anyway...) and did 'make'
> > and 'make install'
> >
> > BUT, I *know* there is somthing needs
Hi all,
I'm horrified to be posting this (i got it working once before) but I
just can't get the damn thing working.
* GeForce FX 5200 on a A7N8X-X
I downloaded the nforce tarball (as I wasn't sure of the kernel type for
rpm with a default RH9 install (didn't match anyway...) and did 'mak
* and then Matt Burleigh declared
> >Can't seem to intall rh9 on my nice new 80g seagate barracuda (380011a).
> >
> >Anyone know the fix? --- It dies around transfering the install image
> >to hard disk (the step after) but has died as early as 'reading
> >packages'..
> >
> Switch the consol
Hi all,
Can't seem to intall rh9 on my nice new 80g seagate barracuda (380011a).
Anyone know the fix? --- It dies around transfering the install image
to hard disk (the step after) but has died as early as 'reading
packages'..
A little help would be sooo much appreciated, thanks ;-)
--
Nick
Hi all,
Whenever I try to do somthing like tar the /var/www/html dir I get a
"sshh sshh sshh" noise (like a scraping sound) and the whole system
freezes and I have to cut the power manually.
I don't even know where to begin, help would be MUCH appreciated.
Thanks..
--
Nick W
--
redhat-list
* and then Dee Dreslough declared
> On Wed, 2003-09-03 at 02:07, Nick Wilson wrote:
> > Hi all,
> >
> > These images will not show up in a browser?
> > http://www.cookaholics.com/images/
> > http://www.cookaholics.com/test.html
>
> They show up for
* and then Mark Neidorff declared
> I agree with what you say, BUT, there are different versions of up2date
> for different versions of RedHat. Best to look in the errata and make
> sure to download the right ones.
Got it. Thanks guys.
That's an embarrassing oversight for RH isn't it?
--
Here's the error:
---
Exception type SSL.Error
Exception Handler Information
Traceback (most recent call last):
File "/usr/bin/../share/rhn/rhn_applet/rhn_applet.py", line 448, in refresh
self.model.refresh(force)
File "/usr/bin/../share/rhn/rhn_applet
Hi all,
How can I find out which version of GTK I'm running please?
I'm using RH9 and am trying to install gimp-1.3.17 and it's telling me
it can't find GLIB 2 or higher...?
Many thanks..
--
Nick W
--
redhat-list mailing list
unsubscribe mailto:[EMAIL PROTECTED]
https://www.redhat.com/mail
* and then Jim Hayward declared
> OK let me try this again, now that my brain is awake. Never answer
> questions right after you crawl out of bed .:-P
Heh! - I do that all the time ;-)
> RH 9 comes with both GTK/GLIB 1.x and 2.2.1.
>
> The development versions of the Gimp require GTK/GLIB 2
Hi all,
I cannot seem to get GIMP 1.3.17 to 'see' my sharefont/freefont
packages. They show up fine in 'chkfontpath' but when I run GIMP I only
have about 25 fonts available.
I don't know how else to check if X is getting them but chkfontpath
seems to indicate that they are installed correctly..
Hi all,
I'm trying to upgrade glib on RH9. I run ./configure make make install
and then when I try to configure pango, it tells me it needs glib 2.1.3
or better.
I noticed that glib was installed in /usr/local/lib/glig not
/usr/lib/glib - Clearly I am missing somthing vital here. Could somebody
* and then Matthew Saltzman declared
> > I'm trying to upgrade glib on RH9. I run ./configure make make install
> > and then when I try to configure pango, it tells me it needs glib 2.1.3
> > or better.
> >
> > I noticed that glib was installed in /usr/local/lib/glig not
> > /usr/lib/glib - Cl
* and then Ricky Boone declared
> > I'm trying to install LimeWire and it's telling me that there is no Java
> > Virtual Macine in my PATH. Could someone please point me in the right
> > direction?
>
> You need install the Java VM to your machine, if you haven't done so
> already.
>
> http:/
Hi all,
I'm trying to install LimeWire and it's telling me that there is no Java
Virtual Macine in my PATH. Could someone please point me in the right
direction?
Many thanks..
--
Nick W
--
redhat-list mailing list
unsubscribe mailto:[EMAIL PROTECTED]
https://www.redhat.com/mailman/listinfo
Hi all,
What are the best P2P music share packages for Linux? Clearly they need
to be popular but not being any kind of /spyware/ is real important
too
Any recommendations or comments most welcome and appreciated.
Thsnks
--
Nick W
--
redhat-list mailing list
unsubscribe mailto:[EMAIL
Hi all,
I keep getting these errors when trying to 'make' cdbakeoven or k3b (cd
burners) on RH9
libtool: link: warning: `-version-info' is ignored for programs
/usr/bin/ld: cannot find -lart_lgpl_2
collect2: ld returned 1 exit status
make[4]: *** [libk3bcore.la.closure] Error 1
make[3]: *** [all
* and then Michael Schwendt declared
> > Well, RH9 pretty much froze. It sounded like it was doing 'updatedb' but
> > it went on for a couple of hours without me being able to move the mouse
> > or use the keyboard: Completly stuck.
> >
> > So, I had to turn the machine off manually: Not an i
Hi all,
Well, RH9 pretty much froze. It sounded like it was doing 'updatedb' but
it went on for a couple of hours without me being able to move the mouse
or use the keyboard: Completly stuck.
So, I had to turn the machine off manually: Not an ideal solution.
* How can find out what it was doi
* and then Gary Stainburn declared
>
> The program is kuser.
>
> It's on the menu as K->System->Kuser
Excellent, thanks very much ;-)
--
Nick W
--
redhat-list mailing list
unsubscribe mailto:[EMAIL PROTECTED]
https://www.redhat.com/mailman/listinfo/redhat-list
Hi all,
Just a quickie: Where (on KDE) is the add new user tool? I can't find
the damn thing anywhere
Many thanks..
--
Nick W
--
redhat-list mailing list
unsubscribe mailto:[EMAIL PROTECTED]
https://www.redhat.com/mailman/listinfo/redhat-list
* and then Jonathan Bartlett declared
> Try this and send us the output:
>
> http://gphoto.sourceforge.net/doc/manual/using-gphoto2.html
Thanks, I got the same as the example for the USB line and then when I
tried --auto-detect, no joy.
Is there a way to interact with the camera on a USB wi
* and then Jonathan Bartlett declared
> If it's a serial camera, I imagine that it doesn't really need a "Driver"
> per se, you just need to load GPhoto or gtkam or whatever it's called
> these days. If it's not in their list, either you need to choose a
> similar one or support just isn't av
Hi all,
Anyone know if one exists or where I might look?
Many thanks...
--
Nick W
--
redhat-list mailing list
unsubscribe mailto:[EMAIL PROTECTED]
https://www.redhat.com/mailman/listinfo/redhat-list
Hi all,
I'm trying to get some fonts to load in GIMP without having to manually
type these lines every time I reboot:
xset fp+ /usr/X11R6/lib/X11/fonts/freefont
xset fp rehash
xset fp+ /usr/X11R6/lib/X11/fonts/sharefont
xset fp rehash
I tried putting them in /etc/X11/xinit/xinitrc but that did
* and then Peter Peltonen declared
> I don't know of any way that does not cost you money.
>
> Most easiest way is to buy VMware and install Windows on it. Then you
> have IE and all other MS thingies you need.
Thanks Peter, out of my price range so I'll go try the codeweaver one.
Cheers...
* and then steve declared
> I have used codeweavers office product with IE5. The basic browser works
> however you do not have the support functions built into windows like
> active-X. I would not recommend it for browsing the internet.
Thanks, basically I want to see how sites look in IE
Hi all,
Is there an easy way to install Internet Explorer 5.5/6 on RH9? I've
heard of Wine but have never really explored it.
I've been looking at this: www.codeweavers.com/products/office/ and it
looks pretty cool but does not support IE6 and costs (GASP!) money
;-)
Advice and opinion most
* and then Anthony E. Greene declared
> On 02-Jul-2003/09:04 +0200, Nick Wilson <[EMAIL PROTECTED]> wrote:
> >I know it's possilbe on KDE to make a floppy DOS formatted but, is it
> >possible for me to also write a file to the DOS formateed floppy so that
>
Hi all,
I know it's possilbe on KDE to make a floppy DOS formatted but, is it
possible for me to also write a file to the DOS formateed floppy so that
a Win machine can access it?
Many thanks
--
Nick W
--
redhat-list mailing list
unsubscribe mailto:[EMAIL PROTECTED]
https://www.redhat.
* and then Bret Hughes declared
> > > added the lines to what? did you restart the font server?
> >
> > Sorry, I added them to the file mentioned above, /etc/X11/fs/config
> >
> > I didn't restart the server (i don't know how?) but I rebooted the
> > system. Is that not enough, is there som
* and then Bret Hughes declared
> > > If you want to make these fonts available via the font server you have to add
> > > a reference to them in /etc/X11/fs/config.
> > >
> > > If you don't use the font server you can add a FontPath entry to
> > > /etc/X11/XF86Config.
> >
> > Hi,
> >
>
* and then Manuel Aróstegui Ramirez declared
> Have you tried to configure it with Xconfigurator?
No. Doesn't that expect me to input the exact sync rates though? I would
have thought editing the file would be the same but maybe you can tell
me where I'm wrong ;-)
I can't seem to find that p
Hi all,
I have put the freefonts in the fonts dir on my system and I know I can
get my applications to recognize them by using xset but I'd like it
permanent.
Could someone please tell me how or show me where I can find out?
Many thanks!
--
Nick W
--
redhat-list mailing list
unsubscribe m
Hi all,
I can set my monitor nicely with xvidtune but cannot make the changes
permanent. Could someone please tell me what to edit in the XF86Config
file?
### Here are the details I think are relevant.
Output from successful xvidtune session:
Vendor: Monitor Vendor, Model: CTX VL510 series, PL
* and then Tom Pollerman declared
> > I've just installed RH9 and am having a spot of bother with KDE. The
> > main thing is that since I changed my resolution from 1024 to
> > 800x600 all my windows are very slightly off the screen on the right
> > side.
> >
> > Can anyone help with that ple
Hi everyone,
I've just installed RH9 and am having a spot of bother with KDE. The
main thing is that since I changed my resolution from 1024 to 800x600
all my windows are very slightly off the screen on the right side.
Can anyone help with that please?
Secondly, I have no 'x' close button on an
u into a shell on it.
>
> 2. Boot installation CD and use it in "rescue" mode - this will mount your
> old system and allow you to chroot to it where you can then change the
> password.
>
> 3. Any others anyone?
Thanks very much! Lifesaver...
--
Nick Wilson // www.
Hi all,
is there a tutorial/resource that explains how to deal with a lost root
password?
Many thanks...
--
Nick Wilson // www.tioka.com
--
redhat-list mailing list
unsubscribe mailto:[EMAIL PROTECTED]?subject=unsubscribe
https://listman.redhat.com/mailman/listinfo/redhat-list
* and then Nick Lindsell declared
> >I need to create a 15mb file for a test. Is there a way to do this?
>
> dd if=/dev/zero of=testfile bs=1024 count=15360
Great, thanks very much!
--
Nick Wilson // www.tioka.com
--
redhat-list mailing list
unsubscribe mailto:[EMA
Hi all,
I need to create a 15mb file for a test. Is there a way to do this?
Many thanks
--
Nick Wilson // www.tioka.com
--
redhat-list mailing list
unsubscribe mailto:[EMAIL PROTECTED]?subject=unsubscribe
https://listman.redhat.com/mailman/listinfo/redhat-list
Hi all,
I've put a cgi script in an virtual host dir on my RH8 system.
Problem is that when I access it with a browser it just shows all the
code?
I'm not sure where to even begin with this?
Many thanks.
--
Nick Wilson // www.tioka.com
--
redhat-list mailing list
u
Hi all,
ever since upgrading to RH8 I've had dreadfull fonts on apps like
Konsole and Opera and the menu bar.
This does not happen in Gnome.
Can anyone offer some pointers?
Thanks...
--
Nick Wilson // www.tioka.com
--
redhat-list mailing list
unsubscribe mailto:[EMAIL PROT
Hi all,
I have major font/display problems though I do have a running system. I
noticed the XF86Config.rpmsave file in /etc/X11
Is this the 'new' version for RH8 and could my problems stem from my
system using the 'old' file?
If so, anyone offer some advice/links?
Many
zilla is fine, as is Gimp.
I just upgraded to 8.0 and rebuilt the nvidia drivers.
Can anyone give me some help getting back to normal? (I'm not to techy
I'm afraid ;-)
Many thanks
--
Nick Wilson // www.tioka.com
--
redhat-list mailing list
unsubscribe mailto:redhat-li
it follow that maybe I've not installed/updated fonts?
--
Nick Wilson // www.tioka.com
--
redhat-list mailing list
unsubscribe mailto:redhat-list-request@;redhat.com?subject=unsubscribe
https://listman.redhat.com/mailman/listinfo/redhat-list
I'm writing in now
Any thoughts
--
Nick Wilson // www.tioka.com
--
redhat-list mailing list
unsubscribe mailto:redhat-list-request@;redhat.com?subject=unsubscribe
https://listman.redhat.com/mailman/listinfo/redhat-list
* and then Nick Wilson declared
> Finally I have X working (kind of) after upgrading to RH8
> But it looks like I have a very low rez (need 800x600).
Sorry, that subject should read "none of my graphical aps will sstart"!
I *do* have 800x600 rez but a *huge* console when I
hi all,
Finally I have X working (kind of) after upgrading to RH8
But it looks like I have a very low rez (need 800x600).
None of my graphical aps will start (opera etc). How do I change the
resolution?
Many thanks.. again...
--
Nick Wilson // www.tioka.com
--
redhat-list mailing
ting the xf86config-4 file to use the 'nv' driver but it
hasn't helped
Many thanks
--
Nick Wilson // www.tioka.com
--
redhat-list mailing list
unsubscribe mailto:redhat-list-request@;redhat.com?subject=unsubscribe
https://listman.redhat.com/mailman/listinfo/redhat-list
running was made with version 3.
> How about trying to find an SRPM and building it?
I'm Sorry Jonathan but I've no idea how to do that? Can you tell me?
--
Nick Wilson // www.tioka.com
--
redhat-list mailing list
unsubscribe mailto:redhat-list-request@;redhat.com?subject=unsubscribe
https://listman.redhat.com/mailman/listinfo/redhat-list
* and then Nick Wilson declared
> It's telling me that the nvidia kernel was made with gcc2 compiler but
> the kernel I'm running was made with version 3.
Update: Not sure if it's the same thing but I get flickering unuseable
screen in basic console mode untill a msg
HI all,
Just upgraded from 7.3 to 8.0
X won't start so I went and re 'make'ed the nvidia kernel.
It's telling me that the nvidia kernel was made with gcc2 compiler but
the kernel I'm running was made with version 3.
Any clues as to what to do?
Many t
Or more specifically when a text file was last modified. Is it possible
to see a 'modified history'?
I've just edited a file but would like to know when I made the last
edit...
Many thanks...
--
Nick Wilson // www.tioka.com
--
redhat-list mailing list
unsubscribe mai
then it becomes
Yes, I need to find out if a someone that has access to an account has
been active in that account. IE. downloading/uploading files
--
Nick Wilson // www.tioka.com
--
redhat-list mailing list
unsubscribe mailto:redhat-list-request@;redhat.com?subject=unsubscribe
ht
Hi all,
Is there a way for me to check the 'history' of ftp commands on a
particular user account?
Many thanks...
--
Nick Wilson // www.tioka.com
--
redhat-list mailing list
unsubscribe mailto:redhat-list-request@;redhat.com?subject=unsubscribe
https://listman.redhat.c
quences
> of numbers that you can then plug into any command, as in
>
> $ mkdir $(seq 1 100)
Hey, that's fantastic! What a nice little utility ;-) Thanks very
much...
--
Nick Wilson // www.tioka.com
--
redhat-list mailing list
unsubscribe mailto:redhat-list-request@;
Hi everyone,
If I need to make 100 directories named 1,2,3...100 how might I do this?
I looked at some references on 'for loops' but just didn't get it ;-)
Thanks...
--
Nick Wilson // www.tioka.com
--
redhat-list mailing list
unsubscribe mailto:redhat-list-requ
der Walt for sending me the toolkit ;-)
--
Nick Wilson // www.tioka.com
--
redhat-list mailing list
unsubscribe mailto:redhat-list-request@;redhat.com?subject=unsubscribe
https://listman.redhat.com/mailman/listinfo/redhat-list
* and then Spanke, Alexander declared
> Hi,
>
> You can use the midnight commander, it has a function to "undelete"
Yes, but I've already deleted it
--
Nick Wilson // www.tioka.com
--
redhat-list mailing list
unsubscribe mailto:redhat-list-req
Hi everyone,
I just managed to delete a file that I desperately need to regain. The
file is called 'index.old': Is there anyone who could show me how to
recover this file?
Many thanks....
--
Nick Wilson // www.tioka.com
--
redhat-list mailing list
unsubscribe mailto:r
Hi all,
Is there anything that can open photoshop files?
Thanks..
--
Nick Wilson // www.tioka.com
--
redhat-list mailing list
unsubscribe mailto:[EMAIL PROTECTED]?subject=unsubscribe
https://listman.redhat.com/mailman/listinfo/redhat-list
Hi all,
Can't find a mirror for RH8 in .dk?
Any help appreciated ;-)
--
Nick Wilson // www.tioka.com
--
redhat-list mailing list
unsubscribe mailto:[EMAIL PROTECTED]?subject=unsubscribe
https://listman.redhat.com/mailman/listinfo/redhat-list
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hi everyone,
Everytime I startx the K CDPlayer pops up. No disc in the machine, I've
deleted an entry in .kde/Autostart to no avail and can't work it out?
Many thanks...
- --
Nick Wilson // www.tioka.com
-BEGIN PGP
uperb. I had a good look but can't work it
> > out?
> >
> Here's the installation manual. You'll need the boot image on a floppy
> to do a hard drive install. It's all covered in the manual.
Well, that was painless! Thanks ;-)
- --
Nick Wilson // ww
te.
Right. Thanks john. I can download the ISO's but I can't find how to
start the installation process? If you know, please tell ;-) or a link
to the instructions would be superb. I had a good look but can't work it
out?
Thanks again...
- --
Nick Wilson // www.explodingne
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hi
Is it possible to download 7.3 and do an upgrade without transfering to
a cd?
Cheers
- --
Nick Wilson // www.explodingnet.com
-BEGIN PGP SIGNATURE-
Version: GnuPG v1.0.6 (GNU/Linux
ately happening. The really odd thing though is that this happens
in Mozilla, Konqueror and NN4 but NOT Lynx?
What might cause this? Apache or something else? I've been running
Vhosts on this box for development for a long time and never had any
trouble?
Many thanks...
- --
Nick Wilson
e?
Many thanks...
- --
Nick Wilson // www.tioka.com
-BEGIN PGP SIGNATURE-
Version: GnuPG v1.0.6 (GNU/Linux)
iD8DBQE89dbqHpvrrTa6L5oRAmwIAJwOgnWH92rTi3J9eJx6j+miVWmthACeJKB5
i5XPJx2M/ZIg43xlTMqC8Ws=
=yfCX
-END PGP SIGNATURE-
update anything prior
> to this problem?
Just up2date'ing... I'm certain that's where the trouble started.
Thanks for the help :-)
- --
Nick Wilson // www.explodingnet.com
-BEGIN PGP SIGNATURE-
Version: GnuPG v1.0.6 (GNU/Linux)
iD8DBQE8uYJyHpvrrTa6L5oRAk0YAKCO4c
?
>
> I'd probably try reinstalling the rpm package.
> rpm -Uvh --replacepkgs rpm-4.0.4-7x.i386.rpm
Well, the rpm version is rpm-4.0.3-1.03
so I'm not really sure how to do the --replacepkgs?
How do I find the right xxx.rpm?
Cheers..
- --
Nick Wilson // www.explodingnet
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hi everyone,
I'm having dreadful trouble with rpm
it says I'm missing librpm-4.0.4.so
Where can I find that? Or is there any other way to get rpm running
again?
Many thanks...
- --
Nick Wilson // www.explodingnet.com
Can someone help me fix it please?
- --
Nick Wilson // www.tioka.com
-BEGIN PGP SIGNATURE-
Version: GnuPG v1.0.6 (GNU/Linux)
iD8DBQE8tZzYHpvrrTa6L5oRAkJDAJ96TNnwPJ8gNNj/dnR4OgwZFED1SwCgpMNR
MrB0Xyw7iqdybN1X5CgIz6U=
=Szvx
-END PGP SIGN
Can someone help me fix it please?
- --
- ---
www.explodingnet.com |Projects, Forums and
+Articles for website owners
- -- Nick Wilson -- |and designers.
-BEGIN PGP SIGNATURE-
Version: GnuPG v
meone help me fix it please?
- --
- ---
www.explodingnet.com |Projects, Forums and
+Articles for website owners
- -- Nick Wilson -- |and designers.
-BEGIN PGP SIGNATURE-
Version: GnuPG v1.0.6
ite owners
- -- Nick Wilson -- |and designers.
-BEGIN PGP SIGNATURE-
Version: GnuPG v1.0.6 (GNU/Linux)
iD8DBQE8maBRHpvrrTa6L5oRAjMQAJ9BDYDmy38AaUklo6kLmhTH237FBQCgiDxd
c9CEekLvnWEpyMl0aNYI6HU=
=tI/q
-END PGP SIGNATURE-
___
R
t.com |Projects, Forums and
+Articles for website owners
- -- Nick Wilson -- |and designers.
-BEGIN PGP SIGNATURE-
Version: GnuPG v1.0.6 (GNU/Linux)
iD8DBQE8kyi4HpvrrTa6L5oRAu/NAJ92fK8+QEeTFW/KgnyQZbFH9LBpAACfZ9Yc
N4fPu0/85C1e/mVx9fjv7dY=
d time this year. What does it mean and what should I
do?
Many thanks
- --
- ---
www.explodingnet.com |Projects, Forums and
+Articles for website owners
- -- Nick Wilson -- |and designers.
-BEG
It's not as if I'm asking the list how to use rpm
is it?
- --
- ---
www.explodingnet.com |Projects, Forums and
+Articles for website owners
- -- Nick Wilson -- |and designers.
even get it to connect to the server!
Could be a ssh1/2 thing?
- --
- ---
www.explodingnet.com |Projects, Forums and
+Articles for website owners
- -- Nick Wilson -- |and designers.
-BEGIN PGP SIGNATURE-
Version: GnuPG v1.0.6 (GNU/Linux)
iD8DBQE8g6
and
+Articles for website owners
- -- Nick Wilson -- |and designers.
-BEGIN PGP SIGNATURE-
Version: GnuPG v1.0.6 (GNU/Linux)
iD8DBQE8g5Y9HpvrrTa6L5oRAq1TAKCYEfROzbisKz5P/rifulESrEMz2gCfcUiI
QK5Nh0JhgdnAuhtqrCe9Rj0=
=iuiz
-END PGP SIGNATURE-
__
hould I do?
- --
- ---
www.explodingnet.com |Projects, Forums and
+Articles for website owners
- -- Nick Wilson -- |and designers.
-BEGIN PGP SIGNATURE-
Version: GnuPG v1.0.6
+Articles for website owners
- -- Nick Wilson -- |and designers.
-BEGIN PGP SIGNATURE-
Version: GnuPG v1.0.6 (GNU/Linux)
iD8DBQE8gTLLHpvrrTa6L5oRAtLTAJ4tmOEc+Cm3GwxU9YmaMSaF0rlZUwCfePuQ
MdlSexodIpJVrK2ftw6
|Projects, Forums and
+Articles for website owners
- -- Nick Wilson -- |and designers.
-BEGIN PGP SIGNATURE-
Version: GnuPG v1.0.6 (GNU/Linux)
iD8DBQE8gTEJHpvrrTa6L5oRAlwFAKCPbZdcbk3cuh7o+k3oWtJxQrvIQgCgm11H
g5j2LiiW7gH5dIDybNNlNpM=
=88
w.explodingnet.com |Projects, Forums and
+ Articles for website owners
- -- Nick Wilson -- |and designers.
-BEGIN PGP SIGNATURE-
Version: GnuPG v1.0.6 (GNU/Linux)
iD8DBQE8gQ5GHpvrrTa6L5oRAlqzAKCtCZ15JcY74EweJRTgOWsaHXUbcQCeJq6c
Yg8w7gY
se tell me?
- --
- ---
www.explodingnet.com |Projects, Forums and
+Articles for website owners
- -- Nick Wilson -- |and designers.
-BEGIN PGP SIGNATURE-
Version: GnuPG v1.0.6 (GNU/Linux)
iD8DBQE8gMLtHpvrrTa6L5oRAg1bAKCqC/mDqRdAopam7/9YOk2e6FVtTwCffydo
fdwpu+svqOhka
+ Articles for website owners
- -- Nick Wilson -- |and designers.
-BEGIN PGP SIGNATURE-
Version: GnuPG v1.0.6 (GNU/Linux)
iD8DBQE8f0NNHpvrrTa6L5oRAgI+AJ9aQNVju+pvJqjALEvd0xaHPlM/FgCeMjvz
fmqca2vUZQ0jE7VDREAyE84=
=EnA9
-END PGP SIGNATURE-
__
nk (despite
what my wife says), sorry for the cofusion, I just meant I was the only
one with physical access.
Cheers Paul.
- --
- ---
www.explodingnet.com |Projects, Forums and
+Articles for website owner
t to ncftp I might try?
Thanks for your help Ed and Gordon
- --
- ---
www.explodingnet.com |Projects, Forums and
+ Articles for website owners
- -- Nick Wilson -- |and designers.
-BEGIN
+Articles for website owners
- -- Nick Wilson -- |and designers.
-BEGIN PGP SIGNATURE-
Version: GnuPG v1.0.6 (GNU/Linux)
iD8DBQE8fqnWHpvrrTa6L5oRAhWNAJ0XAgP7Mpt5mFcd3JmTCVyjIMVbVgCfd1ra
JnUpD1QXbm+8I2KzystH2qg=
=E3Cp
-END PGP SIGNATURE
plete with
password)
If I gave the file 600 perms would that be a risk?
- --
- ---
www.explodingnet.com |Projects, Forums and
+Articles for website owners
- -- Nick Wilson -- |and designers.
1 - 100 of 227 matches
Mail list logo