Hi Larry,
I have recently installed R in RHEL 7.
https://arkit.co.in/install-r-shiny-server-centos-7/
Have a look above URL.
Thanks,
Ravi.
On 18-Jul-2017 9:31 PM, wrote:
> Send redhat-list mailing list submissions to
> redhat-list@redhat.com
>
> To subscribe or unsubscribe via the W
Not a problem you can use.
https://arkit.co.in/linux-learners-guide-book-written-by-ankam-ravi-kumar/
On Sep 14, 2016 9:38 PM, wrote:
> Send redhat-list mailing list submissions to
> redhat-list@redhat.com
>
> To subscribe or unsubscribe via the World Wide Web, visit
>
Hi guys,
Any one of you configured SMC2802W PCI wireless card for redhat 8.0 or
redhat 9.0. I tried a lot but couldn't be able to configure the driver
module. I downloaded driver from
http://ruslug.rutgers.edu/~mcgrof/802.11g/packages/ISL3890-0.1.0.tar.gz
As per the instructions given in the site
Dear Friends,
Could any one give me a link to download Redhat Linux 8.0 64
bit version? Is that software free to download?
Regards
kumar
issue the command xclock, it showed me the clock in display.
How can I start my oracle installation. Please shed some light.
Regards
Kumar
Hi guys,
Stuck up with big problem. I have backup server which is loaded with
redhat 8.0 (kernel 2.4.18-14) and don't know suddenly what happened now
its not booting and following are the errors:
JBD: bad block at offset 2060
JBD: recovery failed
EXT3-fs: error loading journal
Mount: error 22 mo
The arkeia software is good for your requirement...
-santosh
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
On Behalf Of Cokey de Percin
Sent: Tuesday, October 07, 2003 3:01 AM
To: redhat-list
Subject: Re: Backup software suggestions
On Mon, 2003-10-06 at 11:30, Yol
Hi guys,
Trying to install linksys wmp55AG PCI card with redhat 8.0 ( kernel
2.4-14), getting lot of problems. I downloaded the driver madwifi but
when I try to compile its giving error that
/lib/modules/mailto:[EMAIL PROTECTED]
https://www.redhat.com/mailman/listinfo/redhat-list
Yes , I tried for linksys wmp54g with redhat 8.0 its worked fine for
me..
-santosh
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
On Behalf Of rhema
Sent: Monday, September 29, 2003 7:10 AM
To: [EMAIL PROTECTED]
Subject: 802.11g cards
Has anyone tried either the Lin
If your organization is small and you want to take backup upto 4-5
servers then arkeia is very good utility for linux..
-santosh
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
On Behalf Of Denham Eva
Sent: Thursday, September 11, 2003 8:19 PM
To: [EMAIL PROTECTED]
S
I think / you can not export and can not mount..
Regards,
santosh
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
On Behalf Of Daniel Tan
Sent: Tuesday, August 12, 2003 10:04 AM
To: Redhat 2
Subject: nfs newbie
hi all,
trying out nfs. trying to mount to root
Try /etc/yp.conf with broadcast option, edit /etc/hosts with NIS server
name sometime it may help..
Regards,
santosh
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
On Behalf Of Syed Ali
Sent: Thursday, August 07, 2003 2:22 AM
To: [EMAIL PROTECTED]
Subject: RE: Proble
Hi,
mount /dev/hda1 /mnt/windows -t vfat -r -o umask=0222
This has been worked for me at lower version of kernel which you have.
-santosh
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
On Behalf Of bEEnHeX
Sent: Monday, August 04, 2003 5:20 PM
To: [EMAIL PROTECTED]
Hi guys,
Need some information about wireless network. I have etherfast wireless
access point + cable/DSL router with 4-port switch which is operating
fine with all 11b wireless cards, now want to connect a PC into wireless
network which has been configured with dual-band wireless A+G PCI
adapter
MAIL PROTECTED]
On Behalf Of komal
Sent: Monday, July 14, 2003 6:52 PM
To: [EMAIL PROTECTED]
Subject: Re: [OffTopic?]RHCE Exam Preparation
- Original Message -
From: "Sadanapalli, Pradeep Kumar (MED, TCS)"
<[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Monday, Jul
Hi guys,
Want to configure linksys wireless card to laptop which has been
installed with redhat 8.0 (kernel 2.4.18-14), if anyone installed
successfully please dictate the same steps.
Expecting feedback from all experts.
-santosh
--
redhat-list mailing list
unsubscribe mailto:[EMAIL PROTECT
Can someone suggest any good books, URLs, any other sources that are
really good for RHCE exam preparation? Also about CompTIA Linux+
exam..??
Any useful information is appreciated...
--
redhat-list mailing list
unsubscribe mailto:[EMAIL PROTECTED]
https://www.redhat.com/mailman/listinfo/redhat-
Hi,
The m/c is loaded with redhat 7.2 with kernel 2.4.7-10 want to configure
LVM but is it possible to change current partition format to LVM format.
I need to add new harddisk and want to configure LVM Now configuration
is like this
FilesystemSize Used Avail Use% Mounted on
/dev/hd
I would like to take up RHCE exam. I was unable to decide which books to read, as most
of them are
not uptodate. I have around 4 years of experience with RedHat linux systems . Can
someone suggest me
good books, good sources of information for this, any links, the best way to prepare
for it, any
Before updating the glibc, you please check the architecture the glibc
RPM .
All other glibc RPMS(Ex: glibc-common) have i383 architecture set, but
only
the glibc RPM is set to i686 architecture. So even while downloading
from redhat
updates, download GLIBC from i686 folder.Then everything will
If you are using NIS then check the /etc/auto_home at NIS server, may be
some spelling mistake..
Regards,
santosh
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
On Behalf Of Zoki
Sent: Wednesday, July 09, 2003 10:22 PM
To: rhlist
Subject: Re: No directory /home/usern
, 2003 at 12:49:25PM -0500, Sadanapalli, Pradeep Kumar
(MED, TCS) wrote:
> I am forced to use the kernel version 2.4.20-8 which comes with
> default installation of RedHat 9. Whereas the latest version of the
> kernel for RedHat 9 is 2.4.20-18.9 . But as clearcase 5.0 only
> supports
I am forced to use the kernel version 2.4.20-8 which comes with default
installation
of RedHat 9. Whereas the latest version of the kernel for RedHat 9 is
2.4.20-18.9 .
But as clearcase 5.0 only supports upto RedHat 9 kernel 2.4.20-8 , I am
forced to
live with that kernel.
So I am just wondering a
ssage-
From: Reuben D. Budiardja [mailto:[EMAIL PROTECTED]
Sent: Thursday, July 10, 2003 12:23 PM
To: [EMAIL PROTECTED]
Subject: Re: Plug and Play support in linux
On Thursday 10 July 2003 12:34 pm, Sadanapalli, Pradeep Kumar (MED, TCS)
wrote:
> I am just wondering about the progress of Plu
I am just wondering about the progress of Plug n Play support
in linux . What is the current status of it? Anyone can point me
to any useful links on this? Any info is appreciated...
--
redhat-list mailing list
unsubscribe mailto:[EMAIL PROTECTED]
https://www.redhat.com/mailman/listinfo/redhat-
IPTABLES ..see iptables-howto
-Original Message-
From: Khademul Islam [mailto:[EMAIL PROTECTED]
Sent: Thursday, July 10, 2003 11:23 AM
To: '[EMAIL PROTECTED]'
Subject: Firewall
Hi! Everyone, I am new on Linux and like to get my hand dirty.
I have a firewall software on a PC that I want
Title: RE: desktop
For
editing GNOME menus in redhat , this is a very useful link. Please go thorugh
it and you will be able to add new shortcuts in menu and delete the unwanted
permanently. The same applies to KDE also.
The important
files for menu organization are ...
al Message -
From:
Sadanapalli, Pradeep Kumar
(MED, TCS)
To: [EMAIL PROTECTED]
Sent: Tuesday, July 08, 2003 3:38
PM
Subject: RE: desktop
Do
" # cp /usr/share/apps/kdesktop/DesktopLinks/*
$HOME/.kde/Desktop/ " if you ar
Do
" # cp /usr/share/apps/kdesktop/DesktopLinks/* $HOME/.kde/Desktop/
" if you are running KDE
maybe
same will work for even GNOME
cheers..
Pradeep
-Original
Message-From: John Salamone
[mailto:[EMAIL PROTECTED]Sent: Tuesday, July 08, 2003 2:33
PMT
I am using RedHat 9. I want to get rid of KDE screensavers totally. I
want to setup xscreensaver in KDE for my users.
How can I remove the kscreensaver totally and instead configure only
xscreensaver?
In the kcontrol module, under Appeaeance & Themes, when a user clicks on
Screen Saver, I want the
download j2re-1_4_1_03-fcs-linux-i586.rpm from java.sun.com and install
the rpm.
then go to the mozilla plugin directory, say
"/usr/lib/mozilla-1.3.1/plugins"
and make a link to the file
"/usr/java/j2re1.4.1_03/plugin/i386/ns610/libjavaplugin_oji.so"
#cd /usr/lib/mozilla-1.3.1/plugins
#ln -s /usr/
Hi guys,
Would like to ask some simple question, some users used to connect from
solaris to linux m/c through rlogin session but during some idle time
the session will disconnect automatically. To avoid this what could be
done??
Thanks & Regards,
santosh
--
redhat-list mailing list
unsubscrib
Just I downloaded this rpm pdksh-5.2.14-13.i386.rpm and installed with
command rpm -Uvh pdksh-5.2.14-13.i386.rpm , its started working with
ksh.
Regards,
santosh
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
On Behalf Of Jon Haugsand
Sent: Thursday, July 03, 2003 1:
Hi ajay,
I too getting same problem but only thing is that I installed MRTG on
windows platform..
Regards,
santosh
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
On Behalf Of Raghuraj, Ajay
Sent: Friday, June 27, 2003 5:09 PM
To: [EMAIL PROTECTED]
Subject: RE: mrtg
]
On Behalf Of Emmanuel Seyman
Sent: Monday, June 23, 2003 10:24 PM
To: [EMAIL PROTECTED]
Subject: Re: bug tracking tool
On Mon, Jun 23, 2003 at 09:40:10PM +0530, santosh kumar wrote:
>
> Guys really really fed up with bug tracking tool installation. I
I've no idea if it's easy
Hi all,
Guys really really fed up with bug tracking tool installation. I
searched a lot to get any free web based bug tracking tool but could not
be able to get it except bugzilla but bugzilla could not be able to
install. Please suggest any web based free bug tracking tool with easy
installation
Hi ,
Need to install bugzilla on redhat 8.0, tried a lot but could not be
able to install properly. Is there any site I can get bugzilla in the
form of rpm??? please help me out
I downloaded complete bugzilla from
http://www.softwaretesting.de/article/view/33/1/8/ but again getting
lot off errors
e 20, 2003 6:32 PM
To: [EMAIL PROTECTED]
Subject: Re: restrict telnet session
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Fri, 20 Jun 2003 16:44:55 +0530, santosh kumar wrote:
> Want to restrict telnet & rlogin from all m/cs, for all users except
one
> m/c with two users. A
c from
atlas(m/c name), please tell me where I am doing wrong things...
Thanks & Regards,
santosh
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
On Behalf Of santosh kumar
Sent: Friday, June 20, 2003 2:48 PM
To: [EMAIL PROTECTED]
Subject: RE: restrict telnet sessio
]
Subject: Re: restrict telnet session
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Fri, 20 Jun 2003 11:51:44 +0530, santosh kumar wrote:
> I have small and interesting question. I want to give telent access
for
> only 2 users, is it possible??? The system is configured with redhat
8.0
Read
Hi all,
I have small and interesting question. I want to give telent access for
only 2 users, is it possible??? The system is configured with redhat 8.0
Thanks & Regards,
santosh
Ph: 5202424, 5273061 ext 102
--
redhat-list mailing list
unsubscribe mailto:[EMAIL PROTECTED]
https://www.redhat.c
Hi guys,
Struggling a lot to get work with bugzilla bug tracking tool, system is
loaded with redhat 8.0 and installed all required packages and when I
run checksetup.pl get the following o/ps
Checking forData::Dumper (any) ok: found v2.12
Checking for Date::Parse (any) ok: found v
Hi all,
Have some strange question. I have NIS setup with linux desktop. Need to
assign high priority for X user to access a particular m/c. For example
have a high end m/c which is meant for some simulation purpose but it
will be usable by all users around the clock by which it hogs all the
memor
Hi everyone,
The system is loaded with redhat 7.2 and configuration is dual cpu (AMD)
and 4 GB RAM when I execute top command
9:06pm up 7 days, 10:50, 10 users, load average: 2.11, 2.14, 1.88
95 processes: 92 sleeping, 3 running, 0 zombie, 0 stopped
CPU0 states: 97.0% user, 2.0% system, 0.
: gvim package
On Fri, Jun 13, 2003 at 06:18:05PM +0530, santosh kumar wrote:
>
> Where to download gvim package for redhat 8.0, please suggest the
links
Install the vim-X11 package from the RHL 8.0 CDs.
Those contain gvim.
Emmanuel
--
redhat-list mailing list
unsubscribe mailto:
2003, santosh kumar wrote:
> Where to download gvim package for redhat 8.0, please suggest the
links
http://www.rpmfind.net/linux/rpm2html/search.php?query=gvim&submit=Searc
h+...
and maybe
http://www.google.com/linux?hl=tr&ie=ISO-8859-9&q=gvim+rpm+download+redh
at&btnG=Google%
Hi guys,
Where to download gvim package for redhat 8.0, please suggest the links
Thanks & Regards,
santosh
Ph: 5202424, 5273061 ext 102
--
redhat-list mailing list
unsubscribe mailto:[EMAIL PROTECTED]
https://www.redhat.com/mailman/listinfo/redhat-list
Hi everyone,
I have IDE RAID server which is loaded with redhat 7.2, configuring
backup server but not recognizing SCSI tape drive so tried to build
kernel but its not booting through new kernel. Please anyone can give
some suggestions to overcome this problem. Before this also I tried to
build ke
You have to give command as
export DISPLAY=64.39.111.1:0.0 (for bash or ksh)
setenv DISPLAY 64.39.111.1:0.0 (for csh)
Regds,
santosh
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
On Behalf Of Wes Reneau
Sent: Tuesday, June 03, 2003 5:45 PM
To: [EMAIL PROTECTED]
S
Hi all,
Have some problem with new tape drive. I have IDE RAID server which is
loaded with redhat 7.2, planning to configure backup server and attached
a sony DAT tape drive. While booting got some messages like new hardware
is found and want to configure, I said yes and its did something for
conf
Hi all,
Sorry guys I wrote last query in HTML format.
Have some problem with new tape drive. I have IDE RAID server which is
loaded with redhat 7.2, planning to configure backup server and attached
a sony DAT tape drive. While booting got some messages like new hardware
is found and want to config
Title: Message
H i all,
Have some problem with new tape drive. I have IDE
RAID server which is loaded with redhat 7.2, planning to configure backup server
and attached a sony DAT tape drive. While booting got some messages like new
hardware is found and want to configure, I said yes and its
inal Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
On Behalf Of Zoki
Sent: Wednesday, April 02, 2003 7:22 PM
To: rhlist
Subject: Re: Configure secondary mail server
Le 01/04/2003 11:05, « santosh kumar » <[EMAIL PROTECTED]> a
écrit :
> Hi folks,
>
> Can any one tell
Hi guys,
Have small doubt in bash scripting..(#!/bin/bash)
Need to write script to get all m/c info, If I do cat /proc/cpuinfo will
display CPU info.
My requirement is grep CPU model, speed and display the outputs like
For example m/c has single CPU
CPU model : pentium III
CPU speed : 1.73 GHz
I
Le 01/04/2003 11:05, « santosh kumar » <[EMAIL PROTECTED]> a
écrit :
> Hi folks,
>
> Can any one tell me how to configure secondary mail server
to
> fetch mail. Right now have a POP3 mail server which is configured with
> fetchmail so
I
> want to configure another
Alexey Fadyushin.
Brainbench MVP for Linux.
http://www.brainbench.com
santosh kumar wrote:
>
> As per current existing LAN architecutre I have different kind of
> setup. The DNS server itself is acting as gateway with private IP and
> its connected to router with public IP (like
Hi folks,
Can any one tell me how to configure secondary mail server for fetch
mail. Right now have a POP3 mail server which is configured with
fetchmail so want to configure another mail server as a backup , which
could be helpful in case of primary mail server crash.
Waiting for valuable sugges
rver.
Of course, it is the description of the typical situation. If you have
some unusual network configuration or requirements, the DNS
configuration could be more complex.
Alexey Fadyushin.
Brainbench MVP for Linux.
http://www.brainbench.com
santosh kumar wrote:
>
> Hi everyone,
>
Hi everyone,
Have small doubt about secondary DNS. I have a primary DNS server with
redhat 7.2 which is configured with 2 NICs, one for public IP & other
for local IP. My doubt is to configure secondary DNS shall I need again
2 NIC cards & how to promote a secondary DNS in case of Primary DNS dow
Title: Message
Hi,
Go
through the file, just modify domain name instead of workgroup which i am
using..Hope it will help u
Regds,
santosh
-Original Message-From:
[EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf Of Brent L. CoxSent: Wednesday, March 26, 2003 11:0
I think u have to edit /etc/resolv.conf also... & restart the
/etc/init.d/xinetd
Regds,
santosh
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
On Behalf Of Steve Buehler
Sent: Tuesday, March 25, 2003 9:51 AM
To: [EMAIL PROTECTED]
Subject: changing server domain name
You have to edit /etc/sysconfig/networks & /etc/hosts & restart ...
Regds,
santosh
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
On Behalf Of knesbitt
Sent: Saturday, March 22, 2003 12:01 PM
To: [EMAIL PROTECTED]
Subject: Setting host or hostname
trying to convinc
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
On Behalf Of nate
Sent: Thursday, March 20, 2003 12:50 PM
To: [EMAIL PROTECTED]
Cc: [EMAIL PROTECTED]
Subject: Re: Speediup simulation testing
santosh kumar said:
> Hi folks,
> Have some problem with performance..The server is configured with
Hi folks,
Have some problem with performance..The server is configured with redhat 7.2
with the following configurations.
4 GB DDR RAM
AMD Athlon(tm) MP 1800+ (dual processors)
The server is specially using for running simulation tests but as per the
configuration not getting perfomance. To com
Title: Speeding up simulation testing
Hi folks,
Have some problem with performance..The server is configured with redhat 7.2 with the following configurations.
4 GB DDR RAM
AMD Athlon(tm) MP 1800+ (dual processors)
The server is specially using for running simulation tests but as per t
Title: Message
Hi all,
Have some problem with performance of dual
processor m/c. The server is specially using for running simulation
tests.
Server configuration :
AMD Athlon(tm) MP 1800+ (dual
cpu)
4 GB DDR RAM.
As per the system configuration we are not
getting performance. Can any one
Title: Message
Hi folks,
I have fetch mail server which is configured
in redhat 7.2, its a POP3 server which will retrieve mails from another Fetch
mail server which is physically resides in other country. Now I want to configure one more fetch mail server for
present POP3 server as a back
Title: Message
You
don't need to reboot the PC, just restart the /etc/init.d/network...
that's it.
Regds,
santosh
-Original Message-From:
[EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf Of Patrick LawSent: Thursday, March 13, 2003 10:54
AMTo: [EMAIL PROTECTED]Su
Title: Message
Hi everyone,
I have primary DNS which is configured with
redhat 7.2 but have some doubts about secondary DNS configuration. Want to
configure DNS slave with redhat 7.2 , want to know about DNS slave requirements
like
1) Do you need 2 NIC cards
2) Do you need public & private
What the heck are you doing?? We are hear to discuss some linux problems
not to see your adult sites...
Regds,
santosh
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
On Behalf Of Harold Purbal
Sent: Thursday, March 06, 2003 11:23 PM
To: [EMAIL PROTECTED]
Subject: Whi
Its cool man,
Export the home directories by editing /etc/exports. Edit the indirect
maps like /etc/auto_home & /etc/auto_master (for automounting) in NIS
server & restart automount at NIS server or reboot the server.
that's it..
Regds,
santosh
-Original Message-
From: [EMAIL PROTECTED] [
Hi,
Copy /etc/sysconfig/network-scripts/ifcfg-eth0 to eth1,eth2
And edit the files with option ONBOOT=yes
And restart...this is what solved my problem & check for IRQ conflict..
Regds,
santosh
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
On Behalf Of Chris Rou
If u boot into smp kernel mode it will show both processors..
Regds,
santosh
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
On Behalf Of [EMAIL PROTECTED]
Sent: Saturday, March 01, 2003 12:14 PM
To: [EMAIL PROTECTED]
Subject: How to enable Dual Processors of HP netse
Title: Message
Hi all,
This is not 100% linux related
problem but still i hope will get feedbacks. I installed WINCVS
client on win2k m/c and trying to connect Linux CVS server. So far its working
fine and checked out source also but now when i try to connect, its exiting with
code 1 and
Title: Message
Hi everyone,
Some time i am getting login problem with a
m/c, sometimes it allow but some time it doesn't allow. I am getting some
strange logs..
Feb 28 10:12:19 vesta modprobe: modprobe:
Can't locate module eth5Feb 28 10:12:19 vesta modprobe: modprobe: Can't
locate module
Yaa u can do it by bonding for that u have to compile the kernel again.
I also tried to do samething but compiled kernel is not booted for me so
reverted back with same thing but u can try with recompiling the
kernel..
Regds,
santosh
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMA
Title: Message
Hi all,
For single m/c i couldn't be able to login
as a user, i can login as root. The m/c is in NIS env, any user couldn't be able
to login to that particular m/c but they can login to any other m/c in the same
env and in the same LAN. I got some log messages from /var/log/m
26 Feb 2003, santosh kumar wrote:
>
>
>>Hi everyone,
>>
>>I am getting some very strange problem. I can not ping and cannot
>>telnet to redhat 7.2 m/c but from redhat m/c i can telnet & ping other
>>m/cs in the network.. To overcome with same, please gi
As Erick told, definitely its problem with home directory. When u try to
login user ID couldn't be able to get home directory. Try to login as
root, hope it has to allow..
Regds,
santosh
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
On Behalf Of shyam
Sent: Wednesda
EMAIL PROTECTED]
Sent: Wednesday, February 26, 2003 11:32 AM
To: [EMAIL PROTECTED]
Subject: RE: NIC card problem
On Wed, 26 Feb 2003, santosh kumar wrote:
> Kernel IP routing table
> Destination Gateway Genmask Flags MSS Window
irtt
> Iface
> 192.16
Title: Message
Hi everyone,
I am getting some very strange problem. I
can not ping and cannot telnet to redhat 7.2 m/c but from redhat m/c i can
telnet & ping other m/cs in the network..
To overcome with same, please give your
valuable feedbacks..
Thanks & Regards,
santosh
ph : 080-527306
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
On Behalf Of Gene Yoo
Sent: Wednesday, February 26, 2003 2:35 AM
To: [EMAIL PROTECTED]
Subject: Re: NIC card problem
santosh kumar wrote:
> Hi,
>
> I am not able to ping default gateway, but I can ping my own IP
> address..
>
Hi,
I am not able to ping default gateway, but I can ping my own IP
address..
Regds,
santosh
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
On Behalf Of Jerome Dsilva
Sent: Tuesday, February 25, 2003 12:34 PM
To: [EMAIL PROTECTED]
Subject: RE: NIC card problem
San
Title: Message
Hi,
The
network is fine, becoz same cable & network port i tried with other m/c its
working fine..
Regds,
santosh
-Original Message-From:
[EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf Of Amit MhatreSent: Tuesday, February 25, 2003 11:55
AMTo: [
Title: Message
Hi,
follow the
steps:
cd
/usr/src/linux-2.4/
make xconfig
and then changed the config to your needs and then
make clean && make dep && make &&
make bzImage &&
make modules &&
make modules_install && make install
this line use to work with my 7.1 box but it wont work with
Title: Message
Hi ,
Recently i loaded redhat 7.2. The m/c has 3
NIC cards but while installing OS, I configured one NIC with required IP
parameters and its started working fine for 2-3 mins, after that suddenly it is
stopped working without any errors. If I restart the service
/etc/init.
7.2.
regards
Senthil
- Original Message -
From: "santosh kumar" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Friday, February 21, 2003 10:05 AM
Subject: RE: NIS problem
> Hi senthil,
>
> Just go through the below mentioned lines of required files like
>
to.master.I dont have auto.direct and
auto_home in my /etc/ path. Stuck here !!! :-(
senthil
- Original Message -
From: "santosh kumar" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Thursday, February 20, 2003 8:47 PM
Subject: RE: NIS problem
> In NI
In NIS server u have to define automount maps. For example u have all
user home directories on X m/c.
Share that path by editing /etc/exports
Then edit the maps at NIS server like /etc/auto.direct, /etc/auto_home &
/etc/auto.master
That's it while booting client it will mount user home directory
au
Title: Message
If it
is happening while logging in as a normal user, then its problem with user
authentication. And try to login as a root, if it will work normally then it
must be a problem with user authentication means not your client m/c is not
binding with NIS ...
regds,
santosh
Title: Message
Hi,
check
your /etc/yp.conf & /etc/nsswitch.conf files...
Regds,
santosh
-Original Message-From:
[EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On
Behalf Of senthil@jadooworksSent: Thursday, February 20, 2003
3:01 AMTo: [EMAIL PROTECTED]Subject: NIS
pr
Title: Message
This
you can achieve by NIS or NIS+, but first you need to study about your all
requirements and implement one of the methods either NIS or
NIS
Regds,
santosh
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]] On Behalf Of
senthil@jadoo
sage -
From: "nate" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Wednesday, February 19, 2003 12:01 PM
Subject: Re: how to use multiple NIC cards
> santosh kumar said:
>
> > If i assign the IP address in above mentioned manner will it
> > increase perform
Hi,
I think u can manually edit or delete the partitions by fdisk command..
Regds,
santosh
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]
On Behalf Of Ramesh .T.S
Sent: Wednesday, February 19, 2003 12:53 PM
To: [EMAIL PROTECTED]
Subject: Re: How to configure the pa
Title: Message
Hi folks,
I have small doubt about using multiple NIC
cards with linux redhat 7.2. I have server with 3 NIC cards and want to
configure all NIC cards for same LAN.
for example NIC 1 -->
192.168.3.16
NIC 2 --> 192.168.3.17
NIC 3 --> 19
sysconfig/network-scripts and rename ifcfg-eth0 to
ifcfg-eth1
- edit ifcfg-eth1 and change the device from eth0 to eth1 and
change any parameter you need
reboot
Do all this from the console, then after reboot ping first your nic and
then ping any host in your network
Good luck
raymundo
santosh k
Have u tried with GUI base??
It may work bcoz there u will get a option to set user home directory..
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]
On Behalf Of Bret Hughes
Sent: Thursday, January 23, 2003 1:12 PM
To: [EMAIL PROTECTED]
Subject: Re: adduser
On Thu,
Title: Message
Hi,
I have 2 NIC card server . One is 100 mbps
& other is 1000 GB but currently configured for 100mbps. I want to change
current IP address of 100 mbps card to 1000GB card and make it up . For both
cards driver is installed.
when i say ifconfig -a its showing
eth0,eth1 & et
If you try to load redhat 7.2 with normal installation, I hope it will
work but u have to make some small changes at /etc/X11/XF86config-4.
Edit this file & make changes like
Section "Device"
Identifier "My Video Card"
Driver "vesa"
BoardName "Unknown"
Hope it will work..
Embedix Platform and i can't use
/proc file system over there. So what happens, if i try to ping somebody, i gets the
message :-
ip_conntrack: maximum limit of 1016 entries exceeded.
Further information about the setup, you can see from the following conversation.
Thanks & Regards,
Amit Ku
1 - 100 of 225 matches
Mail list logo
