You need to check out DynDNS.org. I have a friend doing this very thing.
http://www.dyndns.org
<>
-- Original Message ---
From: Dali Islam <[EMAIL PROTECTED]>
To: redhat list <[EMAIL PROTECTED]>
Sent: Thu, 16 Oct 2003 20:38:26 -0700 (PDT)
Subject: How to Setup Mailserver??
> My
Sounds like a drive failure maybe. I would first boot with a diskette and
mount your hd's. Then you can poke around your lilo.conf (assuming lilo) and
find where your kernel sits. You want to see if you can mount that hd. This
is a starting point at least.
<>
-- Original Message --
I assume he is using HW RAID. In which case, Linux wouldn't "see" the
physical drives per se'. It sounds like something went wrong before all this
happened (ie ls not working etc). I'd wait the 6hrs as you have little
choice. Once you get a good volume, you can move on. It sound ugly, though.
S
The earlier post is right, though. I've installed it from RPM's only to be
told I have to "recompile milter support." I need to scan all my mail. I have
several domains on this server. Is there no way to have it scan /var/mail?
<>
-- Original Message ---
From: Bill Tangren <[EM
> On Tue, 2003-10-07 at 08:32, Joe Polk wrote:
> > When you have a line like this:
> > Received: from foo.com (localhost.localdomain [127.0.0.1])
> > is it advantageous to remove your localhost entry from /etc/hosts to keep
> > this from happening? If not, should this be
Did you check to see if your smtp daemon is running?
ps -ef | grep sendmail
<>
-- Original Message ---
From: Dali Islam <[EMAIL PROTECTED]>
To: redhat list <[EMAIL PROTECTED]>
Sent: Tue, 7 Oct 2003 07:30:14 -0700 (PDT)
Subject: Mail is not working
> I have crontab setup to send
When you have a line like this:
Received: from foo.com (localhost.localdomain [127.0.0.1])
is it advantageous to remove your localhost entry from /etc/hosts to keep
this from happening? If not, should this be corrected and if so, how?
<>
--
redhat-list mailing list
unsubscribe mailto:[EMAIL
Have you looked at Samba? I believe it can act as a BDC.
<>
-- Original Message ---
From: "Keith & Patty Birchfield" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Fri, 3 Oct 2003 19:13:15 -0400
Subject: Is it possible to use red hat as a BDC?
> Hello all,
>
> Is it possible
I don't know what you mean "with telephone" and by 100mb I assume you mean
with a 100MB switch (ie 4 port switch built in)? Any number will work, D-
Link, NetGear, Linksys.
<>
-- Original Message ---
From: "Noah" <[EMAIL PROTECTED]>
To: [EMAIL PROTECTED]
Sent: Thu, 2 Oct 2003 1
hehe That's funny!
To the original poster:
Run "top" to see what's eating the CPU time. You can use the shift-P option
to sort vie CPU.
<>
-- Original Message ---
From: "Ashley M. Kirchner" <[EMAIL PROTECTED]>
To: [EMAIL PROTECTED]
Sent: Thu, 02 Oct 2003 01:21:23 -0600
Subject:
I use sendmail and love it but for webmail you can't beat OpenWebMail. It's
feature rich and very easy to setup. It picks up virtual (mutliple) domains
easily.
<>
-- Original Message ---
From: Michael Gargiullo <[EMAIL PROTECTED]>
To: redhat mailing list <[EMAIL PROTECTED]>
Sent
Do you know what version the BIOS is? What Smart Start version did you build
with? There is an issue regarding SS6.2 or 6.3 I'm not sure that I know
causes system boots under Windows. I would start by updating the BIOS for
sure. Are you using hardware RAID?
<>
-- Original Message -
Domain Controllers are simply that, controllers of a domain. In Windows, this
allows central account, password, and permission keeping. If you want that in
Linux, you can install Samba which mimmics a Windows Domain Controller (and
also offers WINS capabilities) or install NIS. If your mixing Li
That's exactly what you need to do. Since there is no reverse lookup on your
local sendmail server, you need to send from a known SMTP as stated below.
Tell sendmail to forward all outgoing mail to smtp.charter.net. I use Charter
as well. This keeps folks like AOL from rejecting your mail.
<>
ke I want. Thanks so much for your
instructions, though. I can at least start picking this apart.
<>
-- Original Message ---
From: "Cowles, Steve" <[EMAIL PROTECTED]>
To: "'[EMAIL PROTECTED]'" <[EMAIL PROTECTED]>
Sent: Tue, 9 Sep 20
[EMAIL PROTECTED]>
To: [EMAIL PROTECTED]
Sent: Mon, 8 Sep 2003 15:27:54 -0400 (EDT)
Subject: Re: rh-l] Sendmail+Libmilter
> On Mon, 8 Sep 2003, Joe Polk wrote:
>
> > Does anyone know if in 7.3 if sendmail is compiled in the rpm with
libmilter
> > support? I'm trying to
Does anyone know if in 7.3 if sendmail is compiled in the rpm with libmilter
support? I'm trying to get spamass-milter working and I have it all setup (so
I think) but nothing is filtering.
<>
--
redhat-list mailing list
unsubscribe mailto:[EMAIL PROTECTED]
https://www.redhat.com/mailman/list
I believe the Linksys allows you to shut off remote admin capability.
<>
-- Original Message ---
From: "Rodolfo J. Paiz" <[EMAIL PROTECTED]>
To: [EMAIL PROTECTED]
Sent: Mon, 08 Sep 2003 01:27:45 -0600
Subject: Re: Linksys router and ssh connection
> At 21:03 9/7/2003 -1000, you w
Personally, I wouldn't setup your own DNS server unless you truly have need
to. I use MYDNS.COM to manage my external domains. You don't have to use them
to host it or redirect, rather you can use their "IP Pointing" which is
nothing more than DNS entries on their DNS server. Setup your domain
Webmin seems to handle Samba setup far better than SWAT. I've had changes
made in SWAT not work properly.
<>
-- Original Message ---
From: Gene Poole <[EMAIL PROTECTED]>
To: [EMAIL PROTECTED]
Sent: Thu, 4 Sep 2003 12:49:51 -0400
Subject: SWAT Help
> I am currently running RHL on
I believe an older ver of Webmin had a plug to SWAT. But why do that? Webmin
seems to handle Samba setup far better than SWAT. I've had changes made in
SWAT not work properly.
<>
-- Original Message ---
From: Craig Herring <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Thu, 4
th
> a simple forwarding rule without going nuts with iptables?
>
> Thanks,
> James
>
> On Wed, 2003-09-03 at 09:56, Joe Polk wrote:
> > Try http://www.boutell.com/rinetd/
> >
> > <>
> >
> > -- Original Message ---
> > From
I would like to setup SA to scan server-wide. I have the rpm's installed but
I'm not sure of the best way to set it up. Will I need SpamAss::Milter to do
this? Should I setup a folder full of spam for it to learn from? The
documentation isn't very clear on this. I would assume it will scan
eve
Try http://www.boutell.com/rinetd/
<>
-- Original Message ---
From: James Pifer <[EMAIL PROTECTED]>
To: RedHat List <[EMAIL PROTECTED]>
Sent: 03 Sep 2003 09:35:36 -0400
Subject: Port Forward 1 Port
> I have been googling because I know this has been talked about a lot,
> but what
Name your smtp server smtp.xxx.com and simply forward your traffic to it.
It's going to be sending the headers so it's name is going to be "seen."
<>
-- Original Message ---
From: "Budi Febrianto" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Tue, 2 Sep 2003 11:37:07 +0700
Su
By default, sendmail doesn't relay. I would suggest, however, that you load
Webmin. It simplifies sendmail configuration. If you are just bent on being
l33t and learning it all for yourself, sendmail.org has decent documentation
on most of your questions. Go forth and learn. Then load Webmin and
I don't use it in that manner, but I do use ProFTP and love it; for what it's
worth.
<>
-- Original Message ---
From: "Devon Harding - GTHLA" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Mon, 18 Aug 2003 15:07:06 -0400
Subject: RE: Which ftp?
> Anyone?
>
> -Original Me
I'm using the Belkin FSD6020. It works great actually and is Prism2-based.
<>
-- Original Message ---
From: Keith Morse <[EMAIL PROTECTED]>
To: [EMAIL PROTECTED]
Sent: Wed, 6 Aug 2003 15:42:26 -0700 (PDT)
Subject: Re: Wireless PC Card
> On 6 Aug 2003, Jason Dixon wrote:
>
> > FW
My Belkin card works great! If you get this card, send me a note and I'll
send you info on what I had to do to get it working. The GUI tool didn't work
quite right, but once I editted the appropriate configs I was up!
<>
-- Original Message ---
From: "Richard Worwood" <[EMAIL PR
I occassionally get errors (don't remember if it was this exact error) on my
flash cards when they are blank. I find that formatting them again helps. You
can use your camera to do this, assuming you're using this for a camera. Once
formatted properly, they mount up fine. If you have another CF
Cool! Maybe they'll shitcan Mono.
<>
-- Original Message ---
From: Jason Dixon <[EMAIL PROTECTED]>
To: [EMAIL PROTECTED]
Sent: 04 Aug 2003 09:41:27 -0400
Subject: Novell buys Ximian
> I know this isn't RedHat-specific news, but it's a very intriguing
> headline nonetheless. I, f
rt charging money
> for the free or stop it altogether they will ultimately hurt themselves.
>
> Cheers,
>
> Aly.
>
> On Wed, 2003-07-30 at 13:13, Joe Polk wrote:
> > I think such a move would be foolish. One of the only successful Linux
> > companies a
I think such a move would be foolish. One of the only successful Linux
companies abandoning (officially) the desktop will only hurt Linux on the
desktop. I contend that part of Linux' draw is that the desktop
possibilities are so close that people are tantilized with the possibility of
it. For
To see Megs in df use this:
df -m
If you df -k you're seeing 1k blocks or size in k.
Also, you're not changing anything with df you are simply viewing.
<>
-- Original Message ---
From: Robert Vaughn <[EMAIL PROTECTED]>
To: RedHat <[EMAIL PROTECTED]>
Sent: Tue, 29 Jul 2003 12:34:
Read your /etc/mail/sendmail.mc file and you'll see what's happening.
Sendmail only listens to localhost by default.
<>
-- Original Message ---
From: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Tue, 29 Jul 2003 13:30:15 +0530
Subject: smtp not responding
> Hi all,
>
> In the
What you want to do is configure iptables. Now you will get a lot of pointers
to HOWTO's and such. If you want to make it easy on yourself, go here:
http://muse.linuxmafia.org/ and get gShield. It's a script that will set
everything up for you.
<>
-- Original Message ---
From: D
Well, you can do a couple of things. You could boot into single user mode by
entering "linux single" (quotes mine) at the boot prompt. This will boot you
into single user mode and possibly get you past the problem. Then you could
mount your hd and go into /etc/rc.d/rc3.d/ (or rc5.d depending on
Actually, a Linksys Router with a built in switch has the ability to forward
for ports. Thus giving you an Internet visible server for certain ports. You
can host a website, server mail, ssh, or for those darn kids...setup a Quake
server! (hmmm feeling old. Are Quake servers even hip anymore?)
Why would you want it to? I suspect, if such could work, the IP would have to
be in the list of local domains.
<>
-- Original Message ---
From: "Bailo, John" <[EMAIL PROTECTED]>
To: "'[EMAIL PROTECTED]'" <[EMAIL PROTECTED]>
Sent: Wed, 2 Jul 2003 08:23:35 -0700
Subject: email work
You might want to get a copy of chkrootkit and run against the machine. If
you have been rooted, it might detect something. If it comes up clean, it's
no guarantee, but you can breathe a little easier. Do some of the other
things like check for open ports. You may want to get a bootable Linux di
I would say first get into the BIOS. If you have a BIOS that autodetects your
HD, try doing a new search for it. It looks like your HD has crashed. This is
why you have mount errors and no init found.
<>
-- Original Message ---
From: Li Bing <[EMAIL PROTECTED]>
To: [EMAIL PROTECTE
Without an mta how do you expect the mail to be routed? I know of no way to
get local mail without a daemon, but maybe I'm missing something. The reason
you're getting connection refused is because there is no daemon listening.
Also, to send a message use /bin/mail not sendmail.
<>
--
Gotta patch anything.
<>
-- Original Message ---
From: "Benjamin J. Weiss" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Wed, 18 Jun 2003 14:34:32 -0500
Subject: Re: sendmail config to relay thru my ISP
> Just my $0.02, but after all of the security problems that sendmail
>
Just tell sendmail to send all outgoing mail to a host, i.e. your ISP's SMTP
server. They will recognize your subnet as one of theirs and pass mail just
fine.
<>
-- Original Message ---
From: Jake Colman <[EMAIL PROTECTED]>
To: RedHat List <[EMAIL PROTECTED]>
Sent: Wed, 18 Jun 2
It sounds like you don't have domain.com.au as your local domain for
sendmail. Try telling sendmail to masquerade as domain.com.au. Look for the
DM section in /etc/sendmail.cf. You really shouldn't alter the cf directly,
but you can for testing really quick. Set it to: DMdomain.com.au and restar
I would agree that it's not a substitute for learning the command line.
However, I think it is still a great tool for new users and senior admins.
Sometimes you want to get something done simply. Many times in forums such as
these a new user comes in and has questions about the setup or config o
Webmin is the mad note! The bomb! Excellent! Okay, I'm starting to sound like
Robert Stack. I always recommend it, esp. to newbies because it's so
versitile. I echo other sentiments posted, though. Don't use login with root
on it. We create an admins group and add our admins to that group. Then
Okay, I'll bite. Why are you exporting pine? Pine is a text env mail client.
You could simply ssh and run it.
<>
-- Original Message ---
From: "harris Imansah" <[EMAIL PROTECTED]>
To: [EMAIL PROTECTED]
Sent: Sun, 06 Apr 2003 14:31:29 +0700
Subject: service time out ?
> Hello all
I have no experience with Promise cards, but I have used Compaq and HP cards
with RH using RAID 5. I'm not sure why you're seeing both HD's but perhaps
someone can address that. As to hardware vs. software, it's always faster to
use hardware because the management of the RAID set is offloaded to
Check to see if your samba chit's working:
smbclient -L -N
Make like easier for yourself and install Webmin.
<>
-- Original Message ---
From: "Robert Williams" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Thu, 3 Apr 2003 07:37:18 -0700
Subject: Getting samba to work out of
If you just need it ready to use, just use:
mt erase /dev/st0
That should be all you need. I've found that my DLT's won't read back unless
I set the block size correctly though. They'll write but not read. I use 5120
I think (my DLT is sitting on the floor unused at the moment). You can test
by
I'm in the same boat. A client needs to add disclaimers to all outgoing
email. The milter allows for that but with some progamming that I am not
familiar with. This is a much needed feature and something that hopefully
will integrate with sendmail soon natively. My client has to be HIPAA
compli
A client of mine needs to, because of hippa i need to add signatures or
footers at the end of all emails. What's the best way to accomplish this? He
was told MIMEdefang would do it. Are their others?
<>
--
redhat-list mailing list
unsubscribe mailto:[EMAIL PROTECTED]
https://listman.redhat.c
Sendmail is great for an mta. I use sendmail and webmin. Webmin makes
administration of sendmail alot easier, along with many other services.
<>
-- Original Message ---
From: "Thomas E. Dukes" <[EMAIL PROTECTED]>
To: "[EMAIL PROTECTED] Com" <[EMAIL PROTECTED]>
Sent: Mon, 31 Mar 2
-- Original Message ---
From: "Joe Polk" <[EMAIL PROTECTED]>
To: [EMAIL PROTECTED]
Sent: Sat, 29 Mar 2003 19:29:16 -0400
Subject: Major Crash
> Okay, I moved my mail server this weekend. No biggie. Consquently,
> my list mail backed up and I had over 200 em
lt;>
-- Original Message ---
From: "Robert P. J. Day" <[EMAIL PROTECTED]>
To: [EMAIL PROTECTED]
Sent: Sat, 29 Mar 2003 18:55:11 -0500 (EST)
Subject: Re: Major Crash
> On Sat, 29 Mar 2003, Joe Polk wrote:
>
> > Okay, I moved my mail server this weekend. No bi
Okay, I moved my mail server this weekend. No biggie. Consquently, my list
mail backed up and I had over 200 email messages from this list to download
into Evolution to my laptop, not to mention my other mailboxes that I use
Evolution to check. Well, everything downloaded fine except the list m
My bad, I thought you were asking what the cdrom message was about.
<>
On Thu, 2003-03-27 at 16:25, Joe Polk wrote:
> >From what I can tell it's harmless. I get it too.
>
> <>
>
> On Thu, 2003-03-27 at 15:51, Jianping Zhu wrote:
> > I want to use dmesg
>From what I can tell it's harmless. I get it too.
<>
On Thu, 2003-03-27 at 15:51, Jianping Zhu wrote:
> I want to use dmesg to check how much memory is on my redhat 7.3 machine.
> i user
> dmesg | more
> but get
>
> cdrom: This disc doesn't have any tracks I recognize!
> cdrom: This disc doe
port 25
<>
On Thu, 2003-03-27 at 13:14, Douglas, Stuart wrote:
> In the narrowest possible terms, what ports/protocols do I need to allow
> outbound from a host through a firewall so that a message generated by
> the mail command would get through?
>
> Thanks!
>
> Stuart
>
>
>
> --
> redhat
Wow my bad. Sorry.
<>
On Thu, 2003-03-27 at 12:47, Richard Humphrey wrote:
> Not on RH 8. On RH 8 it is VSFTPD
>
> -Original Message-
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED] Behalf Of Joe Polk
> Sent: Thursday, March 27, 2003 11:40 AM
> To: [EMA
RH's default deamon for FTP is wu-ftp.
<>
On Thu, 2003-03-27 at 12:29, Alan Giltinan wrote:
> Hi,
>
> I installed redhat 8(psyche) recently and did so with the ftp option enabled. I
> am not sure what daemon it is. I am new to this environment.
> I can ftp out of the machine no problem but
If you allow your fw to answer icmp packets, then it will respond to
pings. Not allowing them is a way of making your host appear to not
exist thus being a little more secure. Of course, if someone port scans
you, they'll get a response to whatever is port is open.
<>
On Thu, 2003-03-27 at 11:03,
Try the mii-tool
<>
On Thu, 2003-03-27 at 10:33,
[EMAIL PROTECTED] wrote:
>
>
> hi,
>
> I want to force the speed of the erternet card AMD pcnet32 at boot time.
>
> # cat /proc/version
> Linux version 2.4.18-27.8.0 ([EMAIL PROTECTED]) (gcc version
> 3.2 20020903 (Red Hat Linux 8.0 3.2-7)) #1
Most of the cable/dsl routers will let IPSec pass (Linksys, as
mentioned). Some even include VPN endpoints one of which Linksys makes.
<>
On Thu, 2003-03-27 at 09:57, Jim Crippen wrote:
> Check out the Linksys BEFVP41.
>
> -Original Message-
> From: Simpson, Doug [mailto:[EMAIL PROTECTED
I will assume this is not a laptop, as such I would recommend an
external modem for the best compatibility. As for a NIC (ethernet card),
I've had good luck with Netgear, D-Link, and SMC all offer very
inexpensive cards (under $20).
<>
On Thu, 2003-03-27 at 05:18, sulaiman Mukahhal wrote:
>
> He
I agree. It comes with RH so why add Postfix? I've heard it's easy to
setup etc. but sendmail is fairly straight-forward. If you had Webmin
it's very easy. If you have Mandrake, then go with Postfix, it's default
MTA. If you're sendmail is doing the job for you, why switch?
<>
On Wed, 2003-03-26
I figured there'd be a way in the MC to do it. I was curious because
resolving and simply naming are 2 different things. My server resolves
to about 7 different names but it only has one, since I use name-based
vhosting. Sendmail works and Apache works just fine. Oh well. Sounds
like you're good t
ed, 2003-03-26 at 16:25, Cliff Wells wrote:
> On Mon, 2003-03-24 at 15:39, Stephen Kuhn wrote:
> > On Tue, 2003-03-25 at 10:30, Joe Polk wrote:
> > > We are a sensitive lot, no? :)
> > >
> > > <>
> > >
> >
> > I'm sensitive mostl
Just curious, why have a separate name and aliased IP for it?
<>
On Wed, 2003-03-26 at 15:50, Christian Campbell wrote:
>
> -BEGIN PGP SIGNED MESSAGE-
> Hash: SHA1
>
> RedHat Gurus,
>
> I'm having a little configuration issue with sendmail 8.12 on RedHat 8.0.
>
> I have two IP addres
Notice it says that it hasn't been released. Hmmm...wonder if it will be
delayed!? Then again, it may just come out as a leaflet.
<>
On Wed, 2003-03-26 at 11:44, Doug wrote:
> can you say OOPS!!
>
>
> - Original Message -
> From: "Nicholas Marsh" <[EMAIL PROTECTED]>
> To: <[EMAIL PR
I would second (or is it 3rd now) that motion. I've used sendmail and
webmin and it makes for easy configuration. I also run pop as well.
Additionally, I've added OpenWebmail. This is a fork of the Neomail
package and is very robust. The install is very straight forward and you
can easily set it up
It comes with imap. Look for imap2000 I think on the 7.3 CD. Be sure to
enable it in /etc/xinetd.d/ipop3 once you install it.
<>
On Tue, 2003-03-25 at 22:59, Reuben D. Budiardja wrote:
>
> Hello,
>
> I need to set up a pop mail server. I currently use sendmail as the MTA. IIRC,
> redhat used t
Behind RedHat, I would say Mandrake or SuSE.
<>
On Tue, 2003-03-25 at 15:59, Jason M. Kuhlman wrote:
> Following the discussion over the last couple of days over the release of RH
> 9 has been interesting. Question: Obviously most of us are very fond of
> Redhat, at least up to 7.3 gathered by
ize on the other drive. With a swap partition on two drives, would Linux
> use either/both and therefore be somewhat resilient in case of a drive failure?
>
> Just curious. Thanks!
>
> Stuart
>
>
> -Original Message-
> From: Joe Polk [mailto:[EMAIL P
No but you can go get Ogle or MPlayer and play DVD's. Both are available
in rpm's and will install easily.
<>
On Tue, 2003-03-25 at 14:30, Mike Taggart wrote:
> Is there any software already built in to RH8 to play DVD's?
>
> I've looked and don't see anything that would play back a DVD - but th
r act as an emergency spare to replace any in
> production.
>
> Now I have to go read up on LVM to see if I can add it to the mix.
>
> Thanks again!
>
> Stuart
>
>
> -Original Message-
> From: Joe Polk [mailto:[EMAIL PROTECTED]
> Sent: Tuesday, Mar
How are you trying to "activate it?"
When you reboot, you should see a line Starting eth0 during the section
where all the daemons start (charactarized by all the green OK's you
see). Do you see eth0 starting OK? or FAILED? Let us know. Also give us
some idea of what kinda system you're running.
I see a couple of problems already. /boot should be no more than 100MB.
Anything more is a waste. / should be way more than 500MB. I know that
some will say "I run my entire Linux box on a 486DX66 and 250MB HD!"
Well, this is RH8 and given what you're telling me, I would jack that
up. I would give
#x27;t even be Sun, Red Hat is in a prime position to
> take the lion's share of enterprise Linux, and make some decent money in
> doing so, I fail to see the point of shenanigans like this.
>
> Jared
>
> On Mon, 2003-03-24 at 19:41, Ed Wilts wrote:
> > On Mon, Mar 24,
I was getting was garbage. I was in the process of trying to
> figure out stty settings, when I saw the post of Michael Mansour
> and Joe Polk suggesting minicom.
>
> I had posted my own question on this subject before in February, and
> Gene Yoo also suggested minicom, but I
;t have a good feeling about it.
I'm not, however, at the point where I'll stop using RH or suggesting
it. They still have a way to go before becoming Caldera!
<>
On Mon, 2003-03-24 at 19:41, Ed Wilts wrote:
> On Mon, Mar 24, 2003 at 05:33:07PM -0500, Joe Polk wrote:
> > Wh
v/ttyS0 access failed: Permission denied.
>
> Thanks a lot,
> Francisco
>
> On Mon, 2003-03-24 at 16:47, Joe Polk wrote:
> > Make sure minicom is installed. It's a terminal program for accessing
> > serial devices. COM1 should equal /dev/ttyS0.
> >
> >
Oh I understand completely.
<>
On Mon, 2003-03-24 at 18:39, Stephen Kuhn wrote:
> On Tue, 2003-03-25 at 10:30, Joe Polk wrote:
> > We are a sensitive lot, no? :)
> >
> > <>
> >
>
> I'm sensitive mostly because this stuff affects my busine
We are a sensitive lot, no? :)
<>
On Mon, 2003-03-24 at 18:24, Rick Johnson wrote:
> Nate Golnik wrote:
> > The naming scheme did not have anything to do with trying to expire your
> > certifications early. This a quote from Pete Childers VP of
> > Global Learning Services (used with permiss
Make sure minicom is installed. It's a terminal program for accessing
serial devices. COM1 should equal /dev/ttyS0.
<>
On Mon, 2003-03-24 at 17:36, Francisco Garcia wrote:
> Hi, I need to use my serial port (COM1) to attach my laptop to a Cisco
> router's console port. I am using RH 8 and I want
While I would agree with what most have been saying, namely that RH can
do whatever they damn well pleases, I don't necessarily like the trend.
Caldera has consistently alienated the Linux community starting with
tactics much like this. I used Caldera back in the day and loved it. But
they didn't s
I'm not sure exactly what you are asking. IF you are asking how to share
files on a Linux machine with a Windows machine, the answer is install
Samba.
Of course, you can also ssh to Linux with a client like PuTTY or simply
telnet if you have a telnet server running on your Linux box (though SSH
is
Partitioning can be a subjective thing since it depends, in part, on
what you intend to do with the machine. If, for instance, you intend to
have a sizable user base, then you want to have plenty of /home space.
Regardless, most people new to Linux make the mistake of not making /usr
and /var large
Is this in X? Are you sure it isn't a long update? How is it manifesting
itself?
<>
On Sun, 2003-03-23 at 16:24, Mike Taggart wrote:
> I'm running into a problem and not sure why it happens - I'm running the updates
> through RHN and my pc is routinely freezing during the updates. I've reseated
http://muse.linuxmafia.org
Go there and download gShield. Be sure and get the one for either
ipchains or iptables depending on which one you're running.
<>
On Sat, 2003-03-22 at 22:15, CM Miller wrote:
>
> I want to setup a RH 7.1 box as a gateway/firewall.
> This is an early PII model with on
I can't answer all of these, but:
Your default runlevel is set in /etc/inittab. Look for a line like this:
id:5:initdefault:
I'm on a laptop that boots to X so my runlevel is 5 signified by the
id:5 in the line above. If you want to boot to runlevel 3, let's say,
then you would simply change the 5
That's an open-ended question. Do you want all PC's on the network to go
out to the Internet or just share files and resources internally?
In simple terms, put a NIC in each machine, give them IP's for a single
subnet, plug them all into the switch and you have a home network. If
you want them to s
Mike,
It sounds like you clicked on the "RedHat" icon somewhere and cranked up
RHN instead. The "browser" in a default RH install should be Mozilla. If
you can't find it's icon, try opening a terminal window and running
mozilla. Let us know what happens.
<>
On Sat, 2003-03-22 at 11:13, Mike Tagga
If you know what packages you need, just mount the CD and go manually
install them. They should be in the RedHat/RPMS directory on the CD. You
then use rpm -ivh to install them.
<>
On Sat, 2003-03-22 at 11:57, Limb wrote:
> Hey..
>
> Im trying to install new packages, but when i click update..
yes.
On Fri, 2003-03-21 at 17:32, Paul Greene wrote:
>
> I would still like the root user to be able to receive e-mailed system
> warning messages from localhost. Will disabling Sendmail prevent that
> from happening?
>
> Paul
>
> Anthony E. Greene wrote:
>
> > Paul Greene wrote:
> >
> >> If
As everyone has said, it will no longer do anything. However, if you're
on a client machine, it may not be a problem. Using KMail or Evolution,
you likely point to another SMTP server on your network to send your
mail anyway. System emails to root and such, however, would be dead.
<>
On Fri, 2003
ested government contractors who's clients are *civilian* agencies
> because most of these don't need a clearance (i.e. IRS, Social Security
> Administration, Department of Education, etc> agencies), and they easily employ as many, if not more,
> people as the DoD or NSA
eone who's clients are
> mainly civilian agencies, you don't need a clearance. Actually the first
> time I got hired in this area was for a DoD client, and I didn't have a
> clearance either. I just had to work in the office, and couldn't go to
> the customer'
rote:
> Checking with chkconfig --list ipop3 results in POP3 off.
> I tried chkconfig --level 345 ipop3 on , but a subsequent check still gave POP3 off.
> Thanks
> - Original Message -
> From: "Joe Polk" <[EMAIL PROTECTED]>
> To: <[EMAIL PROTEC
1 - 100 of 269 matches
Mail list logo
