Hi Rahul,
The mount capability has to be included as a kernel option in a custom
build kernel. I forget exactly what it's called (I'm writing in another
OS on the system, so I can't check it right now), but I think it's
something like this:
option EXT2FS
Have you included that in your kern
On Sun, 5 Jan 2003, Paul A. Mayer wrote:
> Thanks for this info. It's way beyond my technical understanding (which
> is truely minimal!), but I think I get the idea. What would this look
> like as a series of commands? Or better yet, what's the "right" way to
> share data between FreeBSD -curre
On Fri, 3 Jan 2003, Nate Lawson wrote:
NL>I was looking into some "could sleep messages" and found some bogus
NL>locking in the attach routine of many drivers. Several init a mtx in
NL>their softc and then lock/unlock it in their attach routine. This, of
NL>course, does nothing to provide exclus
ryan beasley wrote:
On Fri, Jan 03, 2003 at 02:54:57PM -0200, Daniel C. Sobral wrote:
>Alas, that *did* work. My first attempt (replying to another message)
>was done with wrong permissions.
>
>Question... it did not have this trouble before Dec 13, but Dec 30 it
>had (no worlds in between). The
On Sun, 5 Jan 2003, Nate Lawson wrote:
> On Mon, 6 Jan 2003, Bruce Evans wrote:
> > - spec_print() is of low quality: it doesn't print the device name or number.
> > - devfs_print() would be reachable but doesn't exist, so vprint() prints
> > even lower quality output for devfs since there nothi
On Fri, 03 Jan 2003 03:19:28 +0100
Dag-Erling Smorgrav <[EMAIL PROTECTED]> wrote:
> Alexander Leidinger <[EMAIL PROTECTED]> writes:
> > Dag-Erling, any ideas?
>
> http://www.freebsd.org/cgi/query-pr.cgi?pr=bin/46628
>
> Fixed a couple of minutes ago.
Just tested with a world from yesterday: it
--
>>> Rebuilding the temporary build tree
--
>>> stage 1: bootstrap tools
--
>>> stage 2: cleaning up the object tree
I have committed the bits needed to use GCC's basicblock profiling
on -current.
Make sure to recompile the kernbb(8) program first.
Here's an simple example how to profile a single file (vfs_bio.c):
cd /sys/i386/conf
config YOURKERNEL
cd ../compile/YOURKERNEL
mak
On Sun, Jan 05, 2003 at 01:33:14AM -0800, David O'Brien wrote:
>
> Agreed. I'd love to hear from fanf what the changes are to unifdef that
> causes this change in exit code.
I accidentally cocked up the exit codes in my first major revision of
unifdef. It so happens that a few days later markm r
On Mon, Jan 06, 2003 at 10:58:25AM +0100, Harti Brandt wrote:
> On Fri, 3 Jan 2003, Nate Lawson wrote:
> NL>I was looking into some "could sleep messages" and found some bogus
> NL>locking in the attach routine of many drivers. Several init a mtx in
> NL>their softc and then lock/unlock it in thei
Hi,
While trying to build the latest Qt (3.1.1) from original sources, it
fails because it cannot find getpwnam_r, which we appear to be missing
in -CURRENT at the moment, marked:
/*
* XXX missing getpwnam_r() and getpwuid_r().
*/
Qt tries to use this conditionally, using:
#if defined(QT_TH
Dag-Erling Smorgrav <[EMAIL PROTECTED]> writes:
> --
> >>> Kernel build for LINT started on Mon Jan 6 03:35:12 PST 2003
> --
> ===> vinum
> "Makefile", line 4445: warning: duplic
Alexander Leidinger <[EMAIL PROTECTED]> writes:
> Just tested with a world from yesterday: it doesn't segfault anymore,
> but there's no ssh-agent running.
Harrumph. Did you try reverting pam_ssh.c?
DES
--
Dag-Erling Smorgrav - [EMAIL PROTECTED]
To Unsubscribe: send mail to [EMAIL PROTECTED]
w
On Mon, 6 Jan 2003, Mike Barcroft wrote:
> These new truncated lines only make problems harder to solve.
>
> Anyway, the problem is the 5th argument to vn_extattr_get() should be an
> int *, but it's passing a size_t *. It looks like most consumers of
> vn_extattr_get() would prefer a size_t *
Mike Barcroft <[EMAIL PROTECTED]> writes:
> @@ -1077,8 +1078,9 @@
>
> if (buflen != sizeof(temp)) {
> if (buflen != sizeof(temp) - sizeof(temp.ml_auxsingle)) {
> - printf("mac_lomac_associate_vnode_extattr: bad size %d\n",
> - buflen
Hi all,
Following up to my own e-mail, but...
From: Munehiro Matsuda <[EMAIL PROTECTED]>
Date: Sun, 05 Jan 2003 23:05:51 +0900 (JST)
::Hi all,
::
::I got following panic, while trying to run Wine (ver.2002.12.19).
::
::---8<--8<--8<--8<--8<--8<--8<--8<--8<---
::Mou
Gerhard Sittig <[EMAIL PROTECTED]> wrote:
>
>Although the above case is special from what I learnt in another
>message in this thread (I managed to delete it after seeing it so
>I cannot quote it here). ISTR that the non zero exit status comes
>from a tool with the following convention: 0 is "abs
On Mon, Jan 06, 2003 at 02:28:52PM +0100, Poul-Henning Kamp wrote:
>
> I have committed the bits needed to use GCC's basicblock profiling
> on -current.
>
> Make sure to recompile the kernbb(8) program first.
>
> Here's an simple example how to profile a single file (vfs_bio.c):
>
> cd /
Last week I modified the mixer to support volume stepping. Having a
keyboard with volume control on it, it has come in very handy to be able
to use the mixer to increase/decrease the volume. I submitted the
changes to send-pr and have an open ticket. For those that are
interested, Im including the
On 2003/01/05-00:25:17 leafy wrote:
>lock order reversal
>Jan 5 00:19:15 leafy kernel: 1st 0xc26b05c0 process lock (process lock)
>@/usr/src/sys/kern/kern_descrip.c:2099 Jan 5 00:19:15 leafy kernel: 2nd
>0xc2667e34 filedesc structure (filedesc structure) @
>/usr/src/sys/kern/kern_descrip.c:2106
I'd like to have a mirrored root partition. I tried ccd(4) but the boot
blocks couldn't find the fs. Any idea how much work it would take to
enable booting a ccd root? Also, does vinum already support this?
Thanks,
Nate
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-
It seems Nate Lawson wrote:
> I'd like to have a mirrored root partition. I tried ccd(4) but the boot
> blocks couldn't find the fs. Any idea how much work it would take to
> enable booting a ccd root? Also, does vinum already support this?
If you use ATA drives you can use atacontrol to make t
In message <[EMAIL PROTECTED]>, Nate Lawson wri
tes:
>I'd like to have a mirrored root partition. I tried ccd(4) but the boot
>blocks couldn't find the fs. Any idea how much work it would take to
>enable booting a ccd root? Also, does vinum already support this?
The best way to do this is to ge
On Mon, 6 Jan 2003, Soeren Schmidt wrote:
> It seems Nate Lawson wrote:
> > I'd like to have a mirrored root partition. I tried ccd(4) but the boot
> > blocks couldn't find the fs. Any idea how much work it would take to
> > enable booting a ccd root? Also, does vinum already support this?
>
>
< said:
> #if defined(QT_THREAD_SUPPORT) && defined(_POSIX_THREAD_SAFE_FUNCTIONS)
This conditional is erroneous, so you should definitely bug Troll Tech.
It should instead read:
#if defined(QT_THREAD_SUPPORT) && _POSIX_THREAD_SAFE_FUNCTIONS - 0 > 0
(We really should figure out how to implement
On Monday 06 January 2003 20:55, Garrett Wollman wrote:
> <
said:
> > #if defined(QT_THREAD_SUPPORT) &&
> > defined(_POSIX_THREAD_SAFE_FUNCTIONS)
>
> This conditional is erroneous, so you should definitely bug Troll
> Tech.
>
> It should instead read:
>
> #if defined(QT_THREAD_SUPPORT) && _POSIX_T
* De: Daren Desjardins <[EMAIL PROTECTED]> [ Data: 2003-01-06 ]
[ Subjecte: Added volume stepping to mixer ]
> Last week I modified the mixer to support volume stepping. Having a
> keyboard with volume control on it, it has come in very handy to be able
> to use the mixer to increase/decrea
On Mon, Jan 06, 2003 at 07:29:51PM +0100, Soeren Schmidt wrote:
> It seems Nate Lawson wrote:
> > I'd like to have a mirrored root partition. I tried ccd(4) but the boot
> > blocks couldn't find the fs. Any idea how much work it would take to
> > enable booting a ccd root? Also, does vinum alrea
It seems [EMAIL PROTECTED] wrote:
> On Mon, Jan 06, 2003 at 07:29:51PM +0100, Soeren Schmidt wrote:
> > It seems Nate Lawson wrote:
> > > I'd like to have a mirrored root partition. I tried ccd(4) but the boot
> > > blocks couldn't find the fs. Any idea how much work it would take to
> > > enable
On Mon, Jan 06, 2003 at 08:08:09PM +0100, Soeren Schmidt wrote:
> It seems [EMAIL PROTECTED] wrote:
> > On Mon, Jan 06, 2003 at 07:29:51PM +0100, Soeren Schmidt wrote:
> > > It seems Nate Lawson wrote:
> > > > I'd like to have a mirrored root partition. I tried ccd(4) but the boot
> > > > blocks c
On Mon, Jan 06, 2003 at 10:27:21AM -0800, Nate Lawson wrote:
> I'd like to have a mirrored root partition. I tried ccd(4) but the boot
> blocks couldn't find the fs. Any idea how much work it would take to
> enable booting a ccd root? Also, does vinum already support this?
I've moved ccdconfig
Changes made, also added a couple lines of docs here and their and
changed the int variables to more meaningful. Lemme know if their is
anything else you need.
Daren Desjardins
On Mon, 2003-01-06 at 13:59, Juli Mallett wrote:
> * De: Daren Desjardins <[EMAIL PROTECTED]> [ Data: 2003-01-06 ]
>
It seems [EMAIL PROTECTED] wrote:
> > > if `atacontrol rebuild` would work... Is there simple way, i.e. without
> > > copying the content of the array to a temporary location, to recover from
> > > disk-failures when doing raid1 on non-raid controllers ?
> >
> > The problem is that if its the driv
On Mon, Jan 06, 2003 at 08:36:20PM +0100, Soeren Schmidt wrote:
> It seems [EMAIL PROTECTED] wrote:
> > > > if `atacontrol rebuild` would work... Is there simple way, i.e. without
> > > > copying the content of the array to a temporary location, to recover from
> > > > disk-failures when doing raid
On Mon, 6 Jan 2003, David O'Brien wrote:
> On Mon, Jan 06, 2003 at 10:27:21AM -0800, Nate Lawson wrote:
> > I'd like to have a mirrored root partition. I tried ccd(4) but the boot
> > blocks couldn't find the fs. Any idea how much work it would take to
> > enable booting a ccd root? Also, does v
--
>>> Rebuilding the temporary build tree
--
>>> stage 1: bootstrap tools
--
>>> stage 2: cleaning up the object tree
Has anyone been able to get the Logitech Cordless Elite Duo, or any
cordless kb/mouse combos to work?
I have the Cordless Elite Duo however the system only detects my
keyboard, and I have to use a corded mouse. I have been searching around
and yet to find anything on getting the combos to work.
D
It seems Daren Desjardins wrote:
> Has anyone been able to get the Logitech Cordless Elite Duo, or any
> cordless kb/mouse combos to work?
>
> I have the Cordless Elite Duo however the system only detects my
> keyboard, and I have to use a corded mouse. I have been searching around
> and yet to fi
Hello,
I recently attempted to upgrade on of my servers from 4.7 STABLE to 5.0
RC2 using the "Upgrade" facility of sysinstall. After choosing all the
options I needed, the upgrade proceeded through its fsck and started
unpacking off the CD.
This is where things go sour. About 20% of the way th
At 11:54 AM -0800 1/6/03, Nate Lawson wrote:
On Mon, 6 Jan 2003, David O'Brien wrote:
On Mon, Jan 06, 2003 at 10:27:21AM -0800, Nate Lawson wrote:
> > I'd like to have a mirrored root partition. I tried ccd(4)
> > but the boot blocks couldn't find the fs. Any idea how much
> > work it woul
On Mon, 6 Jan 2003, Nate Lawson wrote:
> I'd like to have a mirrored root partition. I tried ccd(4) but the boot
> blocks couldn't find the fs. Any idea how much work it would take to
> enable booting a ccd root? Also, does vinum already support this?
I gave this the old college try a while ag
On Mon, 6 Jan 2003, Kyunghwan Kim wrote:
> On Mon, Jan 06, 2003 at 10:58:25AM +0100, Harti Brandt wrote:
> > On Fri, 3 Jan 2003, Nate Lawson wrote:
> > NL>I was looking into some "could sleep messages" and found some bogus
> > NL>locking in the attach routine of many drivers. Several init a mtx in
Attached is a diff that fixes a "could sleep" problem where
ether_ifattach() does a malloc and dc(4) is holding a lock in its softc.
It uses a cleaner exit strategy with only one call to DC_UNLOCK and no
multiple return statements as well as fixing one place where "error"
wasn't set. If people a
> Has anyone been able to get the Logitech Cordless Elite Duo, or any
> cordless kb/mouse combos to work?
I've got the older Logitech 'Natural' wireless keyboard + wireless mouse
working fine. I've had it for almost 3 years now, and aside from having
to change batteries every 4-6 months it's been
Nate Lawson wrote:
> Attached is a diff that fixes a "could sleep" problem where
> ether_ifattach() does a malloc and dc(4) is holding a lock in its softc.
> It uses a cleaner exit strategy with only one call to DC_UNLOCK and no
> multiple return statements as well as fixing one place where "erro
On Mon, 2003-01-06 at 19:58, Nate Williams wrote:
> > Has anyone been able to get the Logitech Cordless Elite Duo, or any
> > cordless kb/mouse combos to work?
>
> I've got the older Logitech 'Natural' wireless keyboard + wireless mouse
> working fine. I've had it for almost 3 years now, and asid
On Sun, 5 Jan 2003, ryan beasley wrote:
> For what it's worth, I've taken Nate's suggestion and backed down to
> 9600bps, and this problem hasn't occurred yet, so I'm assuming this is
> the "fix". (The 4.7 machine has an ASUS P2B-D board, and the -CURRENT
> box is a recent Dell Dim
> > > Has anyone been able to get the Logitech Cordless Elite Duo, or any
> > > cordless kb/mouse combos to work?
> >
> > I've got the older Logitech 'Natural' wireless keyboard + wireless mouse
> > working fine. I've had it for almost 3 years now, and aside from having
> > to change batteries ev
On Mon, 6 Jan 2003, Maxime Henrion wrote:
> Nate Lawson wrote:
> > Attached is a diff that fixes a "could sleep" problem where
> > ether_ifattach() does a malloc and dc(4) is holding a lock in its softc.
> > It uses a cleaner exit strategy with only one call to DC_UNLOCK and no
> > multiple retur
On Monday, 6 January 2003 at 10:27:21 -0800, Nate Lawson wrote:
> I'd like to have a mirrored root partition. I tried ccd(4) but the boot
> blocks couldn't find the fs. Any idea how much work it would take to
> enable booting a ccd root? Also, does vinum already support this?
I've had this wor
Hello...
I recently installed 5.0-RC2 and X from ports and some programs too.
Now I have trouble with huge font sizes. Mainly in webbrowsers. But it's
only some kind of fonts. I just can't find the options and I can't see any
logs telling me what's wrong. Seems like the fonts use the size 100
in
On Mon, 2003-01-06 at 20:11, Nate Williams wrote:
> Single receiver, but two cords coming out of it.
>
> > dmesg shows that both the mouse and kb were detected, mouse as ums0 and
> > kb as ukb0. XFree is set to use /dev/sysmouse, but dies with no core
> > pointer if I dont use the corded mouse.
>
On Tue, 2003-01-07 at 12:16, Daren Desjardins wrote:
> > > ukbd0: Logitech USB Receiver, rev 1.10/13.10, addr 2, iclass 3/1
> > > ums0: Logitech USB Receiver, rev 1.10/13.10, addr 2, iclass 3/1
> >
> > Mine shows us as a ps/2 mouse. Is this a USB setup? Mine's a normal
> > non-USB setup.
>
> Si
On Tue, Jan 07, 2003 at 12:40:46PM +1030, Daniel O'Connor wrote:
> keyboard using 'kbdcontrol -k devname' I believe (I have never used a
> USB keyboard)
>
> --
> Daniel O'Connor software and network engineer
My past experience with the USB keyboard isn't rather pleasant. When typing
too fast, it
Wouldn't it be better if you didn't do the bogus locking in the attach
routine? It would be better to not lock at all and not initialize the
ISR until last. That's what I did with if_rl. Let's not work around
the bogus locking, but insteal eliminate it. There's no way that the
driver can interr
Tinderbox FAQ: http://people.FreeBSD.org/~mike/tinderbox.html
--
>>> Rebuilding the temporary build tree
--
>>> stage 1: bootstrap tools
-
Hello. This is just cool!
I was wondering, did you receive my mail on this issue? It seems that I
sent mail to you before too, but never got a reply.
Thanks.
- Hiten
On Mon, Jan 06, 2003 at 02:28:52PM +0100, Poul-Henning Kamp wrote the words in effect
of:
> I have committed the bits needed
It seems Andrew P. Lentvorski, Jr. wrote:
> Probably your best choice right now if you have a real RAID controller
> on your motherboard. The BIOS takes care of most of the nasty booting
> details.
> If you don't have a real RAID controller on the motherboard, stop now.
> Rebuilds don't wo
On Tue, 7 Jan 2003, Soeren Schmidt wrote:
> Not true, you can boot off a broken mirror on a non-RAID ATA controller,
> and then rebuild on the fly with atacontrol once the system is up
Is this new (ie. since August 22, 2002)? I attempted to do this back then
and I couldn't actually get a rebuil
In message: <[EMAIL PROTECTED]>
Robert Watson <[EMAIL PROTECTED]> writes:
: assuming it's something about poor signal handling in libc_r, actually.
I've seen signal problems in devd after it forks a child. Before it
forks a child ^C works, but after it does a system(3) to run a
comman
In message: <[EMAIL PROTECTED]>
Nate Lawson <[EMAIL PROTECTED]> writes:
: I was looking into some "could sleep messages" and found some bogus
: locking in the attach routine of many drivers. Several init a mtx in
: their softc and then lock/unlock it in their attach routine. This, of
I recently rebuilt my kernel to HEAD and configured my kernel to support the
Dual 200Mhz PPro's. upon restart, I recieved the kernel panic below.
panic: CPU APIC ID out of range (0..15)
cpuid = 0; lapic.id =
Debugger("panic")
Stopped at Debugger+0x55;xchgl%ebx,in_Deb
It seems Andrew P. Lentvorski, Jr. wrote:
> On Tue, 7 Jan 2003, Soeren Schmidt wrote:
>
> > Not true, you can boot off a broken mirror on a non-RAID ATA controller,
> > and then rebuild on the fly with atacontrol once the system is up
>
> Is this new (ie. since August 22, 2002)? I attempted to d
I believe this panic was cause by the BIOS not recognizing the second CPU.. i
rebooted a couple times and did a couple BIOS config settings. now it will
load the kernel, but right before fsck (and right after SMP: AP CPU #1
Launched!) I get this:
lock order reveral
1st 0xc165x950 process lock (
64 matches
Mail list logo
