On Mon, 2003-01-06 at 20:11, Nate Williams wrote: > Single receiver, but two cords coming out of it. > > > dmesg shows that both the mouse and kb were detected, mouse as ums0 and > > kb as ukb0. XFree is set to use /dev/sysmouse, but dies with no core > > pointer if I dont use the corded mouse. > > I hard-code the mouse and don't use sysmouse. > > > ukbd0: Logitech USB Receiver, rev 1.10/13.10, addr 2, iclass 3/1 > > ums0: Logitech USB Receiver, rev 1.10/13.10, addr 2, iclass 3/1 > > Mine shows us as a ps/2 mouse. Is this a USB setup? Mine's a normal > non-USB setup.
Single wire coming out that splits into a PS/2 connector and a USB connector. If I plug just the USB connector in, dmesg shows both devices however the kb doesnt work. Plugging in just the ps/2 plug I get kb support but dmesg doesnt show the mouse. So I plug both in and have both devices listed. I also tried configuring xfree to use /dev/ums0 directly but it still dies with no core pointer. > > Nate To Unsubscribe: send mail to [EMAIL PROTECTED] with "unsubscribe freebsd-current" in the body of the message
