> This looks strange for me, as I would think, the AP on the computer
> would also need some processing time for recognition, correction and
> routing to the host.
Try it!
If you notice an important performance penalty, *then* come back with
the numbers and the details of your setup, so someone c
Hans writes:
> This looks strange for me, as I would think, the AP on the computer
> would also need some processing time for recognition, correction and
> routing to the host.
Every packet is routed by the kernel. There is no seperate "AP".
How much delay matters? Ping should be under a millis
On Sun, 30 Mar 2025 15:40:07 +0200
Hans wrote:
>
> Then use NGINX with RTMP-module listening on its standard port and
> streaming with RTMP from Computer A to Computer B to the standard
> port.
>
> Everything without any AP or router between.
>
> The stream can then be made visible with VLC
Hans writes:
> yes, I already am aware of this, but this I wanted to avoid. It will be then
> again a new hop, which causes delay (and I suppose, a software router is
> sklower than a hardware device).
I haven't tried this, but take a look at:
https://wiki.debian.org/WiFi/AdHoc
https://help.u
On 2025-03-30, John Hasler wrote:
> Hans writes:
>> This looks strange for me, as I would think, the AP on the computer
>> would also need some processing time for recognition, correction and
>> routing to the host.
>
> Every packet is routed by the kernel. There is no seperate "AP".
>
> How much
Am Sonntag, 30. März 2025, 21:41:30 CEST schrieb debian-u...@howorth.org.uk:
> Timothy M Butterworth wrote:
>
> [snip]
>
> > If you make the storage server the access point
>
> What storage server?
> I thought this was about live video display from a drone?
Oh sorry, maybe I did the wrong expr
and you corectly, the software AP on the computer does
> not
> delay anything although it needs processing time?
>
WiFi operates in four modes: Access Point, Client, Repeater/range extender
and ad-hoc. From what you are describing you want to set up an Ad-Hoc WiFi
network. In an Ad-H
Hi folks,
thank you very much for all your respose! It was so hepfull amnd I have again
again a lot.
You showed me different ways using software AP, ad-hoc and gave me many
informations.
I will test all these things now, what will take me some time.
All my questions are fully answered and so
Timothy M Butterworth wrote:
[snip]
> If you make the storage server the access point
What storage server?
I thought this was about live video display from a drone?
On Sun 30 Mar 2025 at 15:40:07 (+0200), Hans wrote:
> > What new hop? You said you had the setup:
> >
> > hostA≡E--cat5/6--cable--∃≡hostB
>
> no, I have no cable setup, I just said, I know, how to setup when using a
> cable. Maybe I did not use the correct English idiom...
Yes
On Sun, 30 Mar 2025 15:40:07 +0200
Hans wrote:
> Hi David,
>
> > What new hop? You said you had the setup:
> >
> > hostA≡E--cat5/6--cable--∃≡hostB
> >
>
> no, I have no cable setup, I just said, I know, how to setup when
> using a cable. Maybe I did not use the correct Eng
Hi David,
> What new hop? You said you had the setup:
>
> hostA≡E--cat5/6--cable--∃≡hostB
>
no, I have no cable setup, I just said, I know, how to setup when using a
cable. Maybe I did not use the correct English idiom...
> where E and ∃ are ethernet sockets. (You don't norm
Am Samstag, 29. März 2025, 19:21:39 CEST schrieb Stefan Monnier:
> >> You need to make one PC an access point. I think most guides are
> >
> > yes, I already am aware of this, but this I wanted to avoid. It will
> > be then again a new hop, which causes delay (and I suppose,
> > a software router
On Sat, 29 Mar 2025 16:37:39 +0100
Hans wrote:
> > You need to make one PC an access point. I think most guides are
> > designed to then connect that AP to the rest of the network, so
> > that the AP is useful to wifi-only devices, but you can just
> > ignore that.
> >
> > Example at:
> >
> >
>> You need to make one PC an access point. I think most guides are
> yes, I already am aware of this, but this I wanted to avoid. It will
> be then again a new hop, which causes delay (and I suppose,
> a software router is sklower than a hardware device).
No, if one of the PCs is the AP, then c
On Sat 29 Mar 2025 at 16:37:39 (+0100), Hans wrote:
> > You need to make one PC an access point. I think most guides are
> > designed to then connect that AP to the rest of the network, so
> > that the AP is useful to wifi-only devices, but you can just
> > ignore that.
> >
> > Example at:
> >
>
> You need to make one PC an access point. I think most guides are
> designed to then connect that AP to the rest of the network, so
> that the AP is useful to wifi-only devices, but you can just
> ignore that.
>
> Example at:
>
> http://souktha.github.io/misc/create-ap-linuxpc/
>
> Cheers,
>
On 29/3/25 23:41, Hans wrote:
It is not important, if a router is givng the devices an IP-address. So I do
not need any dhcp. The IP-addresses can of course be set manually by me.
The more problem I see, will be the encryption and passkey-exchange, if
needed. However, I do not need encryption,
To clarify the access point will typically assign a subset of a class-C
> range for DHCP. It will usually be O.K. to assign static addresses in
> the same class C but out of the DHCP range
>
> An alternative depending on the router is to configure the router to
> have fixed DHCP addresses based o
On 29/3/25 23:01, jeremy ardley wrote:
On 29/3/25 22:53, Hans wrote:
But is this possible with wifi, too? My idea was working with fixed
IP`s and
give computer A the IP-address from computer B as gateway, and the
other way
round. Of course I my thinking was wrong (otherwise it would have be
On 29/3/25 22:53, Hans wrote:
But is this possible with wifi, too? My idea was working with fixed IP`s and
give computer A the IP-address from computer B as gateway, and the other way
round. Of course I my thinking was wrong (otherwise it would have been
worked).
The WiFi router usually assi
On Sat 29 Mar 2025 at 15:53:01 (+0100), Hans wrote:
>
> just a question: Is it possible, to connect two computers with linux via wlan
> without any router?
>
> I know, it is working with ethernet cable and crossover-cable.
>
> But is this possible with wifi, too? My
Dear list,
just a question: Is it possible, to connect two computers with linux via wlan
without any router?
I know, it is working with ethernet cable and crossover-cable.
But is this possible with wifi, too? My idea was working with fixed IP`s and
give computer A the IP-address from
gt; >> Package failed to install:Error while installing package:
> >> installed linux-image-6.1.0-32-amd64 package post-installation script
> >> subprocess returned error exit status 1
> >
> > Then read backwards until you find the error message from the
> > su
Nicolas George writes:
> Barry Newberger (HE12025-03-24):
>> package: dpkg
>> version: 1.21.22 (amd64)
>>
>> Using Discover update following error occurred:
>>
>> Package failed to install:Error while installing package:
>> installed linux-image-6.
> update-initramfs: failed for /boot/initrd.img-6.1.0-32-amd64 with 1.
> > run-parts: /etc/kernel/postinst.d/initramfs-tools exited with return code 1
> > dpkg: error processing package linux-image-6.1.0-32-amd64 (--configure):
> > installed linux-image-6.1.0-32-amd64 package
ts: /etc/kernel/postinst.d/initramfs-tools exited with return code 1
> dpkg: error processing package linux-image-6.1.0-32-amd64 (--configure):
> installed linux-image-6.1.0-32-amd64 package post-installation script
> subprocess returned error exit status 1
> Setting up linux-imag
Barry Newberger (HE12025-03-24):
> package: dpkg
> version: 1.21.22 (amd64)
>
> Using Discover update following error occurred:
>
> Package failed to install:Error while installing package:
> installed linux-image-6.1.0-32-amd64 package post-installation script
> subpro
On Mon, Mar 24, 2025 at 08:05:32 -0500, Barry Newberger wrote:
> Setting up linux-image-6.1.0-32-amd64 (6.1.129-1) ...
> /etc/kernel/postinst.d/dkms:
> dkms: running auto installation service for kernel 6.1.0-32-amd64.
> dkms: autoinstall for kernel: 6.1.0-32-amd64.
> /etc/ke
package: dpkg
version: 1.21.22 (amd64)
Using Discover update following error occurred:
Package failed to install:Error while installing package:
installed linux-image-6.1.0-32-amd64 package post-installation script
subprocess returned error exit status 1
Ran following:
uname -r
6.1.0-31-amd64
25 11:58 PM, to...@tuxteam.de wrote:
On Fri, Feb 28, 2025 at 10:16:18AM -0500, Arbol One wrote:
Hello to all.
I find myself looking for a way to increase productivity with the
aid of an
all purpose no-code web builder application for Linux. What I am
looking for
is something that is more suited for a
; > all purpose no-code web builder application for Linux. What I am
> > > looking for
> > > is something that is more suited for a small to medium business.
>
> I've taken plone and Drupal for short test-drives. Plone is python,
> Drupal is PHP. These are officially
> On Fri, Feb 28, 2025 at 10:16:18AM -0500, Arbol One wrote:
> > Hello to all.
> >
> > I find myself looking for a way to increase productivity with the aid of
> an
> > all purpose no-code web builder application for Linux. What I am looking
> for
> > is so
On 2025-02-28, Arbol One wrote:
> an all purpose no-code web builder application for Linux. What I am
What is a web builder appplication and what does it do?
On 2/28/25 11:58 PM, to...@tuxteam.de wrote:
On Fri, Feb 28, 2025 at 10:16:18AM -0500, Arbol One wrote:
Hello to all.
I find myself looking for a way to increase productivity with the aid of an
all purpose no-code web builder application for Linux. What I am looking for
is something that is
On 1/3/25 13:58, to...@tuxteam.de wrote:
On Fri, Feb 28, 2025 at 10:16:18AM -0500, Arbol One wrote:
Hello to all.
I find myself looking for a way to increase productivity with the aid of an
all purpose no-code web builder application for Linux. What I am looking for
is something that is more
On Fri, Feb 28, 2025 at 10:16:18AM -0500, Arbol One wrote:
> Hello to all.
>
> I find myself looking for a way to increase productivity with the aid of an
> all purpose no-code web builder application for Linux. What I am looking for
> is something that is more suited for a
Hello to all.
I find myself looking for a way to increase productivity with the aid of
an all purpose no-code web builder application for Linux. What I am
looking for is something that is more suited for a small to medium
business. In my research I found
“https://zapier.com/blog/best-no-code
laptop and two PCs) and on all of them there is the same strange issue:
Discover application (the one for app management under KDE Plasma)
shows the green box (at the top of the app window) with text:
"Debian GNU/Linux 9 is now available." - with button "Upgrade Now" on
Hi,
I've got Debian Trixie installed on three different machines (one laptop
and two PCs) and on all of them there is the same strange issue:
Discover application (the one for app management under KDE Plasma) shows
the green box (at the top of the app window) with text:
"Debian G
On Thu, Dec 12, 2024 at 11:39 AM Muhammad Nadeem Anjum
wrote:
> Dear Timothy,
>
> Thank you for sharing your experience and mentioning the Linux
> Professional Institute (LPI). I’ve heard of LPI before, and it’s great to
> know that you’ve already earned their Linux Essentia
Dear Timothy,
Thank you for sharing your experience and mentioning the Linux
Professional Institute (LPI). I’ve heard of LPI before, and it’s great
to know that you’ve already earned their Linux Essentials and Security
Essentials certifications—congratulations on those achievements!
I
Dear John Doe,
Yes, I am actively seeking job opportunities and looking to enhance my
career in Linux administration and cloud administration. I am eager to
find valuable resources and opportunities to grow my expertise in these
domains.
Best regards,
Muhammad Nadeem Anjum
On 30/11/2024
On Mon, Dec 02, 2024 at 11:45:11 +0100, Yassine Chaouche wrote:
> Le 12/1/24 à 12:58, Andrew M.A. Cater a écrit :
> > Debian official IRC channels are now pretty much all on oftc. liberachat is
> > fine - and you may find the same folk are also on #debian in both -
> > but you may well get directed
Le 12/1/24 à 12:58, Andrew M.A. Cater a écrit :
On Sun, Dec 01, 2024 at 09:42:34AM +0100, Yassine Chaouche wrote:
Hello Muhammad!
and for more real-time interaction I like to hang out on the #linux channel on
liberachat IRC servers,
or, if it's debian specific, on the #debian channel
On Sun, Dec 01, 2024 at 09:42:34AM +0100, Yassine Chaouche wrote:
> Hello Muhammad!
>
> and for more real-time interaction I like to hang out on the #linux channel
> on liberachat IRC servers,
> or, if it's debian specific, on the #debian channel (also on liberachat).
>
sometimes go to is the linuxquestions.org forums,
and for more real-time interaction I like to hang out on the #linux channel on
liberachat IRC servers,
or, if it's debian specific, on the #debian channel (also on liberachat).
Some specific software communities prefer to use other IRC servers like
On Sat, Nov 30, 2024 at 07:09:54PM -0500, Greg Wooledge wrote:
> On Sun, Dec 01, 2024 at 11:02:07 +1100, George at Clug wrote:
> > Is there a "list of coming major design changing in Linux" somewhere on the
> > Internet? Could make my life easier if there was.
>
>
On Sunday, 01-12-2024 at 11:09 Greg Wooledge wrote:
> On Sun, Dec 01, 2024 at 11:02:07 +1100, George at Clug wrote:
> > Is there a "list of coming major design changing in Linux" somewhere on the
> > Internet? Could make my life easier if there was.
>
> I wo
On Sun, Dec 01, 2024 at 11:02:07 +1100, George at Clug wrote:
> Is there a "list of coming major design changing in Linux" somewhere on the
> Internet? Could make my life easier if there was.
I would just like to point out that there isn't a single "Linux
ecosystem&quo
nks for the cute video. I enjoyed watching and then reading through the
comments, followed by some research on the topic.
I have a hard enough time getting to know Linux, but the rate of change that is
happening not only causes me confusion about what is current, but also adds the
burden of rele
On 11/30/24 03:39, Muhammad Nadeem Anjum wrote:
Dear Experts,
We are not experts by any means.
I am an experienced Linux server administrator, having started my
journey with Red Hat Linux 6.0 in 1999. Over the years, I have worked
with various Linux distributions such as CentOS and Ubuntu
On 30 Nov 2024 07:39 +0500, from deb...@nexgntech.com (Muhammad Nadeem Anjum):
> I would greatly appreciate it if you could recommend any active mailing
> lists, forums, or discussion groups where Linux server administrators
> regularly exchange ideas, troubleshoot issues, and share
Dear Experts,
I am an experienced Linux server administrator, having started my
journey with Red Hat Linux 6.0 in 1999. Over the years, I have worked
with various Linux distributions such as CentOS and Ubuntu Server,
addressing diverse requirements and applications. My past experience
On 11/24/24 12:06, Hans wrote:
Hello Alexander,
thank you very much for your response.
Short answer: Not usable.
Hmm, that is a pity.
Long answer:
As a rule of thumb, never trust AliExpress product descriptions.
+100 or more.
I bought a voron trident, $1300 + ship, 3 years ago? Carton a
On 24.11.2024 22:05, Hans wrote:
Long answer:
As a rule of thumb, never trust AliExpress product descriptions.
You have to always look up _specifications_ on Intel official website or
websites of other vendors.Seller claims this device has N100 CPU [1],
but in Characteristics section it is actual
> I am frustrated that I cannot perceive any performance improvements in
> CPUs since the 4th Gen i7s. This is likely due to the software I use
> does not gain any perceptible improvement from running on
> a faster CPU?
Not really, it's simply that, since the end of [Dennard
scaling](https://en.wi
On Monday, 25-11-2024 at 03:39 Stefan Monnier wrote:
> > a CPU that is less than the performance of an i5.
>
> Side note: such a description is not very useful because a 10 year old
> i7 can be significantly less powerful than a recent i3.
While ymmv is valid, I favour i7 CPUs (and Ryzen 7) ov
. Using a Store has some
advantages in providing some form of "vetting" of software that is admitted to
the store. This is a security concept, similar to how I (usually) only install
programs for Linux from Debian's repositories, and only deviate if the software
is well known
On Sun, Nov 24, 2024 at 12:52 PM wrote:
>
> Ahh, ok, thanks -- that's pretty clear that there is no memory slot, and, even
> though I wouldn't use the laptop for much -- to demo some software "on the
> road", 4 MB is very limiting.
The SSD might be soldered onto the motherboard, too. I found that
You're mostly right, I'm not terribly sorry, but I don't use it on every email
or post I make -- on debian-user typically only the first post in a thread I
might start or possibly in the first comment I make to a thread.
I've fixed the sig separator.
But let me ask you, do you complain to those
On Sun, Nov 24, 2024 at 12:34:17PM -0500, rhkra...@gmail.com wrote:
> But let me ask you, do you complain to those that quote all or most of the
> previous posts in a thread when they have no relevant comment about most of
> what they've quoted?
Now and then, yes. Though it often doesn't have m
Thanks to all who replied. With only 4 GB, I'm not interested in that laptop,
but I was maybe most concerned about S-mode (in Windows).
I assume that would not keep me from installing Linux, I mean, presumably I
can still get into the BIOS (or the newer (to me) style of BIOS) and load
Hello Alexander,
thank you very much for your response.
> Short answer: Not usable.
Hmm, that is a pity.
> Long answer:
> As a rule of thumb, never trust AliExpress product descriptions.
> You have to always look up _specifications_ on Intel official website or
> websites of other vendors.Sel
> a CPU that is less than the performance of an i5.
Side note: such a description is not very useful because a 10 year old
i7 can be significantly less powerful than a recent i3.
Stefan
Hans wrote:
> I discovered some small laptops (10 inch and 7 inch), with an Intel N100
> processor, up to 16 GB RAM and ump to 1 TB disk. But shipped with windows.
>
> 2 questions:
>
> 1. Does one have any experience, if the N100 cpu is usable for fluently work?
> These processors are also b
Ahh, ok, thanks -- that's pretty clear that there is no memory slot, and, even
though I wouldn't use the laptop for much -- to demo some software "on the
road", 4 MB is very limiting.
On Saturday, November 23, 2024 06:39:12 PM George at Clug wrote:
> The link you provided about the Laptop states
On 24.11.2024 14:21, Hans wrote:
Following the discussion here, iI would like to ask something.
I discovered some small laptops (10 inch and 7 inch), with an Intel N100
processor, up to 16 GB RAM and ump to 1 TB disk. But shipped with windows.
2 questions:
1. Does one have any experience, if
ke network analysis, data
rescue, office and much more.
It shall run debian, kali-linux, maybe athena-os and (as it is already
installed) Windows_11. Most important is ruinning debian and kali.
However, the question is: Will the N100 be fast enough for fluently working
with it? (My comparision is
On Sun, Nov 24, 2024 at 09:51:16AM +0100, Geert Stappers wrote:
[...]
> Way too kind.
>
> Calling cheap asses cheap asses is IMNSHO better kindness for mankind.
Don't be so harsh on people. Rather be harsh on the corps fleecing them.
Trying to get a cheap computer is understandable if your bud
that I will be able to load Linux on
> > that
> > laptop -- can anyone tell me for sure?
That should be the vendor.
And if the vendor doesn't care, don't care about that vendor.
> > PS: I'd also want to expand the RAM and I have to find out if I can do that.
>
Oops, failed to send to the list -- resending.
On Saturday, November 23, 2024 06:15:45 PM George at Clug wrote:
> On Sunday, 24-11-2024 at 07:44 rhkra...@gmail.com wrote:
> > Ahh, with respect to RAM, there is an empty SODIMM slot and at least one
> > site has installed an 8 GB stick there for a t
Hi,
The link you provided about the Laptop states: "Memory Slot (Available)
0", indicating you would not be able to upgrade the memory.
I believe you can put in an M.2 NVMe and then install Linux to that NVMe, that
way you can still boot Windows as well as Linux?
I would be
On Sunday, 24-11-2024 at 07:44 rhkra...@gmail.com wrote:
> Ahh, with respect to RAM, there is an empty SODIMM slot and at least one site
> has installed an 8 GB stick there for a total of 12 GB -- I'm not sure what
> the maximum additional RAM could be. (The factory installed 4 GB is soldered
On Sat, Nov 23, 2024 at 03:38:56PM -0500, rhkra...@gmail.com wrote:
> I see an attractive deal on a laptop that is shipped with Windows 11 in
> S-mode
> (link below).
>
> I assume (I know), but am not sure that I will be able to load Linux on that
> laptop -- can anyon
On Sat, 23 Nov 2024 15:38:56 -0500
rhkra...@gmail.com wrote:
> 64GB SSD
Sorry, I can't tell you for sure if Linux will load on one of these, not
having done the experiment.
I can tell you that I would not plan on dual booting. I have Windows 11
on two of my machines here, and have sh
On Sat, Nov 23, 2024 at 03:38:56PM -0500, rhkra...@gmail.com wrote:
>
> Rh Kramer
>
> --
> rhk
>
> | Sorry about the sig -- some people think it is too long -- it is my soapbox.
No, you aren't, and you know you aren't. So drop the fake apology. Over
40 lines of sig on an approx 20 line email! At
Ahh, with respect to RAM, there is an empty SODIMM slot and at least one site
has installed an 8 GB stick there for a total of 12 GB -- I'm not sure what
the maximum additional RAM could be. (The factory installed 4 GB is soldered
in).
On Saturday, November 23, 2024 03:38:56 PM rhkra...@gmail.
I see an attractive deal on a laptop that is shipped with Windows 11 in S-mode
(link below).
I assume (I know), but am not sure that I will be able to load Linux on that
laptop -- can anyone tell me for sure?
PS: I'd also want to expand the RAM and I have to find out if I can do that.
c
On 11/18/24 12:45, Gupta, Tulika wrote:
Dear support team
I have purchased a new APC UPS which I want to connect with four Linux Debian
clusters.
The APC UPS Model: SURTD3000XLIM (APC model) has one serial com connector and
one USB connector on the back of the UPS. Two cables were provided
le (goes to the serial com connector of UPS) and
> also b) an USB-A to mini-USB cable connector. I used both the cables
> to connect to our two Linux clusters.
That last sentence is your first mistake. You should use either the
serial cable or the USB cable, not both. Connect it to one compute
Dear support team
I have purchased a new APC UPS which I want to connect with four Linux Debian
clusters.
The APC UPS Model: SURTD3000XLIM (APC model) has one serial com connector and
one USB connector on the back of the UPS. Two cables were provided alongwith
the UPS purchase- a) RJ-45 to DB
On 13/10/24 08:36, William Torrez Corea wrote:
I configure a file for example /etc/network/interfaces.d
Configure the file, save and exit but the changes are not made. I need
to make a second configuration.
For me it is a waste of time.
What happened?
--
With kindest regards, William.
On Sat, 12 Oct 2024 18:36:34 -0600
William Torrez Corea wrote:
> I configure a file for example /etc/network/interfaces.d
/etc/network/interfaces.d is a directory; I suspect you mean you write
a configuration file in /etc/network/interfaces.d.
>
> Configure the file, save and exit but the chan
se to happen?
Most Linux systems do not monitor their config files for changes
and then adopt them automatically. (There are a few programs
that do, but they are exceptions.)
For interfaces.d, I would expect a change after an ifup/ifdown
command.
If the file is not saved to disk, there are bigger problems.
-dsr-
On Sat, Oct 12, 2024 at 18:36:34 -0600, William Torrez Corea wrote:
> I configure a file for example /etc/network/interfaces.d
That's a directory, not a file.
> Configure the file, save and exit but the changes are not made. I need to
> make a second configuration.
>
> For me it is a waste of ti
I configure a file for example /etc/network/interfaces.d
Configure the file, save and exit but the changes are not made. I need to
make a second configuration.
For me it is a waste of time.
What happened?
--
With kindest regards, William.
*Larry Wall invented a messy programming language --
On Wednesday, October 9, 2024 11:30:36 AM CEST, Alexis Grigoriou wrote:
root@architect:~# dpkg -l 'linux-image*'
if someone would ask me, i would recommend to type (as root):
get rid of the old/unnecessary files:
# apt-get --purge autoremove
reinstall the current kernel:
On 09/10/2024 16:30, Alexis Grigoriou wrote:
root@architect:~# apt-cache policy linux-image-amd64
linux-image-amd64:
Installed: (none)
Install this package and it will pull latest kernel. Perhaps you need to
fix nvidia issues as well.
On Wed, Oct 09, 2024 at 05:55:34 -0400, Timothy M Butterworth wrote:
> What version of Debian are you running? You should not have kernel 5.10.0
> and 6.1.0.
He doesn't. The vast majority of those kernel packages are in the "rc"
state (removed, but configuration files are not purged). Most likel
chitect:~# cat /etc/apt/sources.list
# deb cdrom:[Debian GNU/Linux 11.2.0 _Bullseye_ - Official amd64
NETINST 20211218-11:12]/ bullseye main
#deb cdrom:[Debian GNU/Linux 11.2.0 _Bullseye_ - Official amd64 NETINST
20211218-11:12]/ bullseye main
deb http://deb.debian.org/debian/ bookworm main non
> this kernel. All other Bookworm installations are running 6.1.0.26-
> > > amd64. I installed 6.1.0.26 manually but I got a lot of errors
> > > during
> > > boot and no GUI.
> >
> > > From the affected system, please show the output of:
> >
> >
On 9 Oct 2024 12:30 +0300, from ale...@nanoid.net (Alexis Grigoriou):
> This is an excerpt from /etc/syslog:
>
> 2024-10-07T19:33:45.474746+03:00 architect systemd-modules-load[320]:
> Error running install command 'modprobe nvidia-modeset ; modprobe -i
> nvidia-current-drm ' for module nvidia_drm
t; amd64. I installed 6.1.0.26 manually but I got a lot of errors
> > during
> > boot and no GUI.
>
> > From the affected system, please show the output of:
>
> $ apt-cache policy linux-image-amd64
root@architect:~# apt-cache policy linux-image-amd64
linux-image-a
t and no GUI.
>From the affected system, please show the output of:
$ apt-cache policy linux-image-amd64
$ dpkg -l 'linux-image*'
$ sudo cat /etc/apt/preferences /etc/apt/preferences.d/* 2>/dev/null
IIRC the kernel issues were around 6.1.0-13, so if your system is on
6.1.0-
Hello list,
It seems like one of my Debian Bookworm installations is stuck on
this kernel. All other Bookworm installations are running 6.1.0.26-
amd64. I installed 6.1.0.26 manually but I got a lot of errors during
boot and no GUI.
I remember there was an issue regarding a kernel update a few
(-0500), Richard Owlett wrote:
> > > > > Is the AMD64 version of "Debian GNU/Linux Installation Guide"
> > > > > available as a single file.
> > > > >
> > > > > I need it available when the network is not.
> > > > >
&
On 09/19/2024 09:16 AM, Richard Owlett wrote:
Is the AMD64 version of "Debian GNU/Linux Installation Guide" available
as a single file.
I need it available when the network is not.
IF you have *already* installed Debian, the individual HTML files and
compressed copies of the PDF
On 09/20/2024 10:57 AM, David Wright wrote:
On Fri 20 Sep 2024 at 07:53:28 (-0500), Richard Owlett wrote:
On 09/19/2024 10:04 AM, David Wright wrote:
On Thu 19 Sep 2024 at 09:16:25 (-0500), Richard Owlett wrote:
Is the AMD64 version of "Debian GNU/Linux Installation Guide"
avai
On Fri 20 Sep 2024 at 07:53:28 (-0500), Richard Owlett wrote:
> On 09/19/2024 10:04 AM, David Wright wrote:
> > On Thu 19 Sep 2024 at 09:16:25 (-0500), Richard Owlett wrote:
> > > Is the AMD64 version of "Debian GNU/Linux Installation Guide"
> > > available as
1 - 100 of 13235 matches
Mail list logo
