With a fresh config, my VLC in bookworm would play the file with a bit
less than 1 frame per second... console output:
$ VLC media player 3.0.18 Vetinari (revision 3.0.13-8-g41878ff4f2)
[55d9bd39e550] main libvlc: Running vlc with the default interface. Use
'cvlc' to use vlc without interface
Hello,
I found that I had to comment the following line inside
/etc/ImageMagick-6/policy.xml to make image->PDF conversion work again:
Is this because of a ghostscript vulnerability? Could this please be
re-enabled as soon as that issue is fixed, and I also suggest
mentioning it in the NEWS fil
The 3.0 firmware files work for me!
This is an old Centrino laptop with a fresh Wheezy install. At a big site
with many APs, wireless stops after 15 to 45 minutes, requiring a reload of
the ipw2200 kernel module. When using OpenVPN, it stops after only a few
minutes, making it unusable. The 3.14
There _is_ a nasty bug lurking here. Just did a system upgrade from Squeeze
(Evolution 2.30.3-5) to testing (3.4.4-1). The result is the same as
described by the original reporter and by a French user ("everything worked
fine except that all locally stored mail in Evolution has gone" [1]).
Spec
I didn't have the LanguageTool extension installed. But my problem were
wrong permissions on /etc/opt.
On Thu, 2012-02-23 at 19:47 +0100, Rene Engelhard wrote:
[...]
> (I don't know whether the others who participated in this bug also had it -
> you should have included in the mail, n...@bugs.de
I had the same symptoms after updating from OOo in Squeeze to the
current LibreOffice in squeeze-backports. Existing and new users, with
or without existing ~/.libreoffice, would just see a half-second of
splashscreen before a segfault within libsofficeapp.so occurred. root,
however, could always w
The original bug report seems to me a duplicate of #460288.
I had the same problem using 2.4.1-7, but I just upgraded to 3.1.0-5 and
it works there!
signature.asc
Description: This is a digitally signed message part
Hello, I ran into this bug today. Norbert's instructions in his last
comment worked well for me. This is a very old notebook which is used
about every nine months and then most software is updated to unstable.
Today it was a transition from teTeX 2 to the current unstable.
Best regards, Vikt
On Sat, 2007-10-20 at 14:53 +0200, Josselin Mouette wrote:
> As already explained earlier in this bug log, this is because
> applications now use GTK+ for printing instead of libgnomeprint. If you
> want to print using LPR, you need to set the following in .gtkrc-2.0 :
> gtk-print-backends =
Package: xbase-clients
Version: 1:7.2.ds2-2
Severity: minor
This is a very minor problem :-)
Try this:
$ xmessage -buttons "Yes\, I want that,No\, I do not" "Some text"
I end up with one correct button "Yes, I want that",
but in the other one, the backslash is shown: "No\, I do not".
Seems the
Package: libgnomeprint2.2-0
Version: 2.18.1-1
Followup-For: Bug #431725
I'm using lprng (configuration not changed since ages), printing from KDE apps
and command-line works, gnome-control-center "Printers" brings up the KDE
printer managing which looks fine. However, since some time (maybe since
This bug is known at upstream:
http://bugzilla.gnome.org/show_bug.cgi?id=266147
BTW, the title of this (Debian's) bug report lacks a negation:
The problem is that Evolution does NOT show the gpg signature for
encrypted and signed mail sent by Enigmail.
signature.asc
Description: This is a digita
Hi, I just updated twinkle and ran into this issue again. Thanks to this
bug report, I easily updated libzrtpcpp-0.9-0 from 0.9.0-2 to 0.9.0-5
and the problem disappeared.
Might it be that the twinkle 1.0.1-1 package does not yet contain the
right dependencies?
HTH,
Viktor.
signature.asc
Descri
Package: evolution
Version: 2.10.1-1
Followup-For: Bug #406664
This is still present in 2.10.1-1. Particularly, it happens to me when I
want to send an encrypted mail from the "Sent Mail" folder again, by
clicking on "Edit as new message". It does NOT happen if I just save an
encrypted mail as a d
Package: mail-notification
Version: 4.0~rc2.dfsg.1-4
Severity: normal
Tags: patch
I had an old version of libnotify1 (0.3.2-4). When mail-notification
should paint a popup, it crashed instead. Easy to test: No need to
set up any mailboxes, just leave the default settings ("Enable message
popups" c
Package: wodim
Version: 5:1.0~pre4-1.1
Followup-For: Bug #392342
It even occurs with CDs burned by wodim himself;
I can't continue a multisession CD I started this morning.
Other people report the same, e.g. in this german Debian mailing list:
http://people.debian.org/~terpstra/message/20061010.06
On Tue, 2006-10-03 at 17:01 +0200, Jonas Smedegaard wrote:
> On Mon, 02 Oct 2006 15:50:16 +0200 Viktor Horvath wrote:
>
> > Indeed, it is confusing to have an entry "CNID_METAD_RUN=yes" in
> > /etc/default/netatalk only to find out that cnid_metad is *not*
> >
Same as #336490.
signature.asc
Description: This is a digitally signed message part
Indeed, it is confusing to have an entry "CNID_METAD_RUN=yes" in
/etc/default/netatalk only to find out that cnid_metad is *not* started
automatically. A fix would be great.
signature.asc
Description: OpenPGP digital signature
Would be great if audacity could be built with portaudio-v19 by default,
when that's mature enough. Apparently, one gets nice JACK support by it
- that's what attracts me :-)
Best wishes,
Viktor.
signature.asc
Description: This is a digitally signed message part
Package: vlc
Version: 0.8.6-svn20060823.debian-3
Severity: wishlist
Debian's vlc has no Speex support compiled in which is a pity,
considering that Speex is a really-free audio codec and used by
free software people in combination with Theora. Would be nice
if Debian's players could play such movi
Package: gnome-splashscreen-manager
Version: 0.2-1
Followup-For: Bug #314310
Tried it today for the first time.
When I start it via gnome-control-center, the window flashes up and
disappears immediately, and I have this on the console:
/usr/lib/ruby/1.8/gnome-splashscreen-manager/ui/main_window.
From the Kino forum:
http://www.kinodv.org/dcforum/dcforum?az=show_topic&forum=101&topic_id=2007
"Problem solved. All I had to do was to set Normalisation to PAL in the
Preferences (Defaults tab) and download and install ffmpeg.
I was then able to import an mpg movie into Kino."
signature.asc
De
I'm sorry, probably I was too hasty to submit this...
After using 2.5G of swap, povray 3.6.1 is (extremely slowly) able to
render my file. megapov ist a fork of povray 3.5 and probably thus more
modest, and that old Mac has to have both a clever swap mechanism and a
good graphics processor. Still
Package: povray-3.6
Version: 3.6.1-1
Severity: normal
I have a very complex file to render (a fractal in great detail),
and povray dies because he runs out of memory. I have an AMD Athlon, 1 GHz,
768 MB real memory + 512 MB swap. Even after increasing the swap to 1.5 GB,
povray died, this time he
Stumbled into the same bug. I was happy with defoma and everything for
the last years, however today I wanted to add another TrueType font. I
got completely stuck between the various font mechanisms.
I created defoma-hints for my file, (re-)registered them, ran
defoma-reconfigure, but couldn't fin
Salut Clément,
I'm a bit confused... before, I used apt-build with -O3 and
-mtune=athlon in its configuration, and /usr/bin/gcc and g++ pointed to
4.1 versions. Now I changed the apt-build configuration to -O2 and
-mtune=i386, however, "ps" tells me what's really going on: I'm using
gcc/g++ 4.0.3
I rebuilt the package with "apt-build", using gcc/g++ 4.1.0-1+b1 and
"-mtune=athlon -O3" for my machine. Seems to work now, I can render an
example.
Regards, Viktor.
signature.asc
Description: This is a digitally signed message part
Package: povray-3.6
Version: 3.6.1-1
Followup-For: Bug #348399
Same thing happening here. A pity, as I have to use
povray for a university project. Could it be an optimization
problem? Both the original bug reporter and me are using
AMD Athlons...
Regards,
Viktor.
-- System Information:
Debian
Subject: scilab: bug still there
Followup-For: Bug #302506
Package: scilab
Version: 3.0-14.1
*** Please type your report below this line ***
I can confirm that this bug still exists. At first I thought that all of
Scilab would be unusable, as the first thing I did was invoking the help
function.
Package: emacs21
Version: 21.4a-3
Severity: minor
Hello,
when writing in latex-mode (no auctex)
and having a "verbatim" environment, like this:
\begin{verbatim}
$ ls -l
\end{verbatim}
latex-mode takes this as the beginning of math-mode and does wrong syntax
highlighting / indentation / ... fo
Hello,
sorry to report that maybe the paper dimensions aren't the essential
point. On my machine, it shows nicely 210x297mm, however I get the paper
size error described above. Only the PostScript/default into a file
works (and there I have to change the papersize from Letter to A4 at
every single
Well, a logical error in dselect's dependencies never crossed me again.
Now using newer versions, of course. So probably this should be marked
irreproducible and closed.
Have a nice day, Viktor.
signature.asc
Description: This is a digitally signed message part
On Wed, 2006-03-29 at 15:03 +0200, Heikki Henriksen wrote:
> Please upgrade libgtkhtml3.8-15 as well :)
Thanks, it worked!
Doubtless evolution's next upload will depend on the newer version?
Regards, Viktor.
signature.asc
Description: This is a digitally signed message part
Package: evolution
Version: 2.4.2.1-2
Followup-For: Bug #358071
Hello, my evolution still freezes like the others described,
even after upgrading to 2.4.2.1-2 :-(
Before, I got "double free or corruption (out)",
with the new package I get "invalid pointer".
Using "G_SLICE=always-malloc" helps, th
Maybe there's a confusion here: mingw32 supports wchar_t indeed (and
wxWidgets cross-compilation), however some STL classes like wstring and
streams like wcout aren't yet implemented in mingw32.
Apparently there are people working on this... I found
http://lists.zerezo.com/mingw-users/msg00753.htm
Hello,
I also had no audible new mail notification for a long time. However, my
Evolution 2.4.2.1 now works. It's linked against libesd0, so it uses esd
(the sound server used in GNOME). I don't use neither full GNOME nor
full KDE, so I have to start "esd &" before I start evolution. If you
try th
I don't have this problem anymore in 2.4.2.1-1.
Best regards, Viktor.
signature.asc
Description: This is a digitally signed message part
For me, that bug has gone away in 2.4.2.1-1.
I hope for the others, too...
Viktor.
signature.asc
Description: This is a digitally signed message part
It works well with a generic OOo 2.0 (RPMs converted to TGZ by alien,
installed in /opt), so it's really a compilation problem - maybe the
multimedia code doesn't build with gcj. Anyway, as long as we don't have
a free solution, the inserting of video in Debian's OOo has to be
considered broken.
Package: openoffice.org-impress
Version: 2.0.0-2
Followup-For: Bug #227265
I'm using OOo 2, but I am completely stuck how to insert a video.
Changelog says: "embedding videos should be possible now (closes: #227265)".
However, I have no "Insert -> Video", "Insert -> Object -> Video" or
anything. I
On Fri, 2005-11-11 at 02:34 +0100, Jonas Smedegaard wrote:
> The CVS snapshot in Debian is quite recent. The home of BasiliskII
> changed name. That seem to have confused your investigation...
Hi, thanks for the fast answer. OK, so there is only one program with an
older and a newer homepage. Howe
I should add that I use a custom 2.6.13.2 kernel with the "tun" module loaded.
$ ls -l /dev/net/
crw-rw-rw- 1 root root 10, 200 Nov 10 23:04 tun
signature.asc
Description: This is a digitally signed message part
Downloaded latest CVS, as described on the "original" BasiliskII page
http://basilisk.cebix.net . Can't get it to compile ("./configure"
syntax errors in spite of latest autoconf), however, the ChangeLog lists
TUN/TAP and JIT. So that version seems to be the future...
signature.asc
Description: T
Package: basilisk2
Version: 0.9.20050730-1
Severity: wishlist
Hello,
I tried a lot to get network access in Basilisk II. I want to use the Net,
so sheep_net is not an option, I want the TUN/TAP one. But I think the
original Basilisk II as found on
http://basilisk.cebix.net/
is not capable of us
Package: evolution
Version: 2.2.3-5
Followup-For: Bug #333054
Tried to upgrade to most recent libebook1.2-3 (1.2.3-4.2), problem remains.
Regards, Viktor.
-- System Information:
Debian Release: testing/unstable
APT prefers unstable
APT policy: (500, 'unstable')
Architecture: i386 (i686)
Shell
Hello,
I have exactly the same problem that was described above. Running i386
unstable 2.6.13.2 with some patches (reiser4, bootsplash, suspend2). I
noticed the problem with 2.2.3-4, upgrading to 2.2.3-5 didn't help.
However, my situation is not so worse as I *am* able to manually enter
the date.
For me, the problem disappeared when upgrading to kcontrol (and all the
other KDE stuff) 3.4.2-1.
Best wishes,
Viktor.
signature.asc
Description: This is a digitally signed message part
Hello,
yes, the bug is also present in 2.0.18-8. However, by testing it, I
found out additional information. I'm talking about the options
"preserve file time" und "preserve file permissions". They are to be
found globally under FTP->Options and locally in each bookmark.
When I disable them globa
Package: gftp-gtk
Version: 2.0.18-7
Severity: normal
I have the same problem as the bug report #230848 states: When modifying
bookmarks (to disable file preservation times, for example), clicking one
or two times on "Apply" or "Save" lets gftp-gtk segfault. This also
happened when I removed my .g
Package: kcontrol
Version: 4:3.3.2-1
Followup-For: Bug #312544
I've the same problem (nothing in kcontrol), and that also causes
Konqueror to not display its configuration dialog, printing on the
console:
kcmshell: WARNING: Could not find module 'filebehavior'.
kcmshell: WARNING: Could not find m
Hello,
I installed speex 1.1.6-2 today on Debian unstable and got a very
similar error:
speexenc: relocation error: speexenc: undefined symbol: speex_encode_int
Upgrading libspeex1 to 1.1.6-2 (from 1.0.rel.4-1) helped. Please upgrade
this dependency!
Best wishes,
Viktor.
signature.asc
Descrip
Hello everybody,
I also had the problem of Evolution offering only the "Save as..."
option since 2.0.something, and until now (I'm using 2.2.1.1). I
understood they switched to the shared-mime database, and I have the
newest version, 0.16-3. So I started reading the specifications. This is
what I
Hello, I had the same problem and solved it. The solution was posted in
#303054. Maybe it applies also to this one?
Best wishes, Viktor.
Forwarded Message
From: Viktor Horvath <[EMAIL PROTECTED]>
To: [EMAIL PROTECTED]
Subject: solved!
Date: Tue, 12 Apr 2005 00:27:56
First I updated libgnomeprintui2.2-common and libgnomeprintui2.2-0 to
2.8.2-2 (latest unstable) each, but that didn't help. Then I updated
libgnomecups1.0-1 to 0.2.0-2 (although I don't use any CUPS)
libgnomeprint-bin to 0.37-5
libgnomeprint-data to 0.37-5
libgnomeprint15 to 0.37-5
libgnomeprint2.2
I've got the same problem (evolution crashes when printing) with several
versions (2.0.3, 2.0.4, 2.2.1.1-1), but now I realize that this could be
interconnected to my PalmPilot sync problems (choosing one of the
EAddress/ECalendar/EToDo conduits gives me a "unable to instantiate XYZ
conduit"). Comm
56 matches
Mail list logo
