l/main/p/postbooks-schema/postbooks-schema_4.11.3.orig.tar.gz
Hopefully this info is helpful.
Sincerely,
Sean M. Pappalardo
signature.asc
Description: OpenPGP digital signature
despite the DB engine
being too new (9.6.11.) This worked fine in v4.10.0-2. The DB itself is on
version 4.9.5.
Sincerely,
Sean M. Pappalardo
-- System Information:
Debian Release: 9.6
APT prefers stable-updates
APT policy: (500, 'stable-updates'), (500, 'stable')
Archite
Hello again.
Any updates on this? I see upstream has released 1.0.27 of the backends
so if we can get that into backports, I can try that.
Sincerely,
Sean M. Pappalardo
--
Pegasus/RPG
"D.J. Pegasus"
smime.p7s
Description: S/MIME Cryptographic Signature
Hello again.
For further testing, I did the following:
sudo dpkg -r python-paramiko
pip install paramiko==1.18.5
And the problem still appears just the same as with a newer Paramiko.
(Does that mean this problem is not related to Paramiko then?)
smime.p7s
Description: S/MIME Cryptographic Sig
Package: python-paramiko
Version: 2.4.0-1
Severity: important
Dear Maintainer,
I use SSH keys on a PKCS#11 smart card (via OpenSC) to authenticate to various
machines via SSH.
I also use Fabric to automate certain tasks on some remote machines and have
been doing so since Jessie. It worked fine
Also, FWIW, I don't have /usr/lib64/sane so of course there was no
effect.
smime.p7s
Description: S/MIME Cryptographic Signature
Also, FWIW, I don't have /usr/lib64/sane so of course there was no
effect. :P
smime.p7s
Description: S/MIME Cryptographic Signature
As root, right after powering up the scanner, running scanimage -L
results in a 5 second delay then it prints:
device `avision:libusb:001:012' is a Hewlett-Packard ScanJet 7400c
flatbed scanner
Running it again results in a 60 second delay, then it prints the "No
scanners were identified." messag
Sorry, forgot to test the workaround.
doing "sudo ln -s /usr/lib64/sane /usr/lib" has no effect.
smime.p7s
Description: S/MIME Cryptographic Signature
Package: libsane
Version: 1.0.25-4.1
Severity: important
Dear Maintainer,
SANE worked correctly and reliably for me in Debian 8/Jessie (package version
1.0.24-8+deb8u2.) Since upgrading to 9/Stretch, it no longer does.
Specifically, I have an HP ScanJet 7400c connected via USB. When I first turn
2.7.13-2
ii python-openvswitch 2.6.2~pre+git20161223-3
openvswitch-vtep recommends no packages.
openvswitch-vtep suggests no packages.
-- no debconf information
--
Sean M. Collins
e to get a back-trace of one of the crashes:
http://paste.debian.net/799001/
Sincerely,
Sean M. Pappalardo
-- System Information:
Debian Release: 8.5
APT prefers stable-updates
APT policy: (500, 'stable-updates'), (500, 'stable')
Architecture: amd64 (x86_64)
Foreign Arch
Package: postbooks-schema-quickstart
Version: 4.9.5-1~bpo8+1
Severity: normal
Dear Maintainer,
The postbooks-schema-quickstart package places the
postbooks_quickstart-4.9.5.sql.gz file at / instead of
/usr/share/postgres-schema as the package description says.
This problem appears to be present
This is still a problem in samba package version 4.2.10+dfsg-0+deb8u2
(on amd64 and i386 at least.)
smime.p7s
Description: S/MIME Cryptographic Signature
More information from the working version:
PCI ID: vendor: 103c ("*Hewlett-Packard Company*"), device: 3239 ("*Smart
Array Gen9 Controllers*"), subvendor: 103c, subdevice: 21c0 ("*P440ar*")
Kernel Module: HP HPSA Driver (v 3.4.4-1)
Debian-Installer syslog from the broken version:
Jun 8 21:34:25
Hey everyone,
Here's what I came up with for the first draft of the new page. If there's
anything that you want added just let me know, or feel free to add it! For
the introduction I took parts of other pages that I thought would be
relevant to the information given here.
I have added two small
Hey guys,
I'm ready to take on this task. I'll work on it and get back to you!
Thanks
--
Sean Mottles
Package: upower
Version: 0.9.17-1
Severity: normal
Tags: upstream
Dear Maintainer,
The upower package seems to have a problem with laptop display panel
brightness settings (at least in conjunction with KDE 4.8.4's power
management applet) in that if I move the slider all the way up, the
back-l
Package: skanlite
Version: 0.8-2
Severity: important
Dear Maintainer,
Skanlite as shipped in Wheezy shows corrupt preview images when lineart
or dithered image types are selected. It looks as though the byte order
is mixed up or the matrix is transposed because I see what should be an
all-blac
.2.y if it doesn't work as-is. I'll
take a look at doing that when I get time, if no one else does it first.
When is the freeze for stuff like this for Wheezy?
Sincerely,
Sean M. Pappalardo
smime.p7s
Description: S/MIME Cryptographic Signature
upstream might we see it
in Debian Testing?
(Also, the reply message address for subscribing to bug reports is too
long (username part) and my mail server rejects it, so please make sure
to CC me on replies.)
Sincerely,
Sean M. Pappalardo
smime.p7s
Description: S/MIME Cryptographic Signature
, the dropbear boot script does only the following:
ifconfig eth0 up
/sbin/dhclient eth0
Sincerely,
Sean M. Pappalardo
Sr. Networks Engineer
Renegade Technologies
spappala...@renegadetech.com
Office: (630) 631-6188
Package: ifenslave-2.6
Version: 1.1.0-17
Severity: important
The local network is inaccessible over a bonded interface when one of the
slave interfaces was brought up at boot time. (Using dropbear at boot
to allow SSHing to the box to enter an LUKS passphrase remotely.)
Networks beyond the gateway
,
Sean M. Pappalardo
Sr. Networks Engineer
Renegade Technologies
<<->>
This E-Mail message has been scanned for viruses and content
and cleared by >>smaRTmail<< fr
Package: bacula-common
Version: 5.0.2-2
Severity: normal
The default configuration files (bacula-dir.conf, bacula-fd.conf,
bacula-sd.conf located in /usr/share/bacula-common/defconfig/ in the
package, /etc/bacula after installation) ship with hard-coded passwords.
This is a security issue in that
Package: ifenslave-2.6
Version: 1.1.0-17
Severity: important
After configuring a bonded interface, it does not come up properly on
reboot. (The network is unreachable, and networked machines cannot see
the machine with the bonded interface on the network.)
After every reboot, I must log in to a
Ignore the name...it's a holdover from before we revamped our version
numbering.)
Let me know if you need anything else.
Sincerely,
Sean M. Pappalardo
"D.J. Pegasus"
Mixxx Developer - Controller Specialist
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with
which version to include.
In the meantime, I'm testing building the 1.7 Mixxx code branch on AMD64
to see if I can reproduce then fix the problem.
Sincerely,
Sean M. Pappalardo
"D.J. Pegasus"
Mixxx Developer - Controller Specialist
--
To UNSUBSCRIBE, email to debian
For your reference, I finally got a Kernel bug account set up and
submitted kernel bug #15362:
http://bugzilla.kernel.org/show_bug.cgi?id=15362
Let me know if there's anything else you might need from me on the
Debian side.
Sincerely,
Sean M. Pappa
until just now.)
Sincerely,
Sean M. Pappalardo
<<->>
This E-Mail message has been scanned for viruses
and cleared by >>SmartMai
An up-to-date list of dependencies can be found here:
http://mixxx.org/wiki/doku.php/compiling_on_linux
<<->>
This E-Mail message has been scanned for viruses
and cleared by >>SmartMail<< from Smarter Technology, Inc.
Mixxx doesn't depend on glib at the moment, according to one of the head
developers.
<<->>
This E-Mail message has been scanned for viruses
and cleared by >>SmartMail<< from Smarter Technology, Inc.
<<-
Package: console-tools
Version: 1:0.2.3dbs-66
Severity: important
File: console
Using nVidia Quadro FX 1400 hardware and having just done a dist-upgrade within
squeeze, virtual consoles are no longer available and the font changes to a
really thin lanky-looking one just before X starts. I can CT
The kernel bug system's confirmation message hasn't arrived in over 24
hours. I can't file a bug there without that. Is there any way you can
file one?
<<->>
This E-Mail message has been scanned for viruses
and cleared
Package: linux-image-2.6.30-1-amd64
Version: 2.6.30-6
Severity: normal
Attached is the system info from a normal boot on kernel 2.6.26-2-amd64 for
comparison
-- Package-specific info:
-- System Information:
Debian Release: squeeze/sid
APT prefers testing
APT policy: (500, 'testing')
Archit
Package: linux-image-2.6.30-1-amd64
Severity: normal
Attached is the system info when booting without any troubleshooting options.
-- Package-specific info:
** Version:
Linux version 2.6.30-1-amd64 (Debian 2.6.30-6) (wa...@debian.org) (gcc version
4.3.4 (Debian 4.3.4-1) ) #1 SMP Sat Aug 15 18:09
But I added that parameter as a troubleshooting step after seeing
similar complaints elsewhere on the Web. (It made no difference.) I
still have the problem with that mptbase.mpt_msi_enable=0 removed.
Sean
<<->>
This
Package: linux-image-2.6.30-1-amd64
Version: 2.6.30-5
Severity: important
Since upgrading to the 2.6.30 kernel, drives attached to my LSI/MPT SCSI
controller are no longer visible. If I boot using the 2.6.26-2 kernel, it works
fine.
-- Package-specific info:
** Version:
Linux version 2.6.30-1-
Package: linux-image-2.6.26-1-xen-amd64
Version: 2.6.26-13lenny2
Severity: critical
Justification: breaks the whole system
*** /tmp/reportbug-linux-image-2.6.26-1-xen-amd64-20090617-4201-OxIDWT
Subject: linux-image-2.6.26-1-xen-amd64: kernel BUG at mm/slab.c:3008
Package: linux-image-2.6.26-1-xe
On 01/16/2008 04:12 PM, [EMAIL PROTECTED] wrote:
Package: libtext-unidecode-perl
Please please please add tones to the Chinese.
There have been many suggestions for Unidecode over the years, and yours
is absolutely the first one that is actually good. Very good, in fact.
And I have no idea
On 08/03/2007 09:31 AM, Dominic Hargreaves wrote:
Hi,
Please seem below the report submitted to Debian. I don't believe that
this is a Debian-specific bug.
Please preserve the Cc list if you reply.
I will not cooeperate with this naievite. (QED.)
Severity: Inevitable!
In practical terms, i
Where do I tell Debian
to run this procedure?
Thanks very much for your time and insight.
Sincerely,
Sean M. Pappalardo
<<->>
This E-Mail message has been scanned for viruses
and cleared by >>SmartMa
42 matches
Mail list logo
