Package: timeshift
Version: 22.11.2-1
Severity: grave
Justification: causes non-serious data loss
X-Debbugs-Cc: truescore149...@gmail.com
Dear Maintainer,
User cant make BTRFS snapshots without "@" subvolume (debian uses "@rootfs"),
but user can make RSYNC snapshot. The problem is that when you t
> AFAIK /dev/sd* discovery and ordering was never guaranteed to be
> deterministic nor persistent across boots nor match any hardware or
> firmware ordering. One should not rely on these names, hence the use of
> persistent identifiers such as UUID, device path or disk ID.
I agree. That is why I u
Package: debian-installer-12-netboot-amd64 (20230607+deb12u1)
Net Installer:
https://deb.debian.org/debian/dists/bookworm/main/installer-amd64/current/images/netboot/mini.iso
Severity: high
Configured System:
HPE DL20
1x 480GB SSD
3x 960GB SSD
I am installing Debian Linux on servers using UEFI P
Package: rxvt-unicode
Version: 9.30-2+b4
Severity: minor
Tags: patch
Dear Maintainer,
When using the --help option, it outputs
"font-size.step: interger", but that should be spelled
integer. A patch (against the source tar) is attached.
-- System Information:
Debian Release
Package: wnpp
Severity: wishlist
Owner: Justin Morgan <2justinmor...@gmail.com>
X-Debbugs-Cc: debian-de...@lists.debian.org, 2justinmor...@gmail.com
* Package name: usagef
Version : 0.1.0
Upstream Author : Name <2justinmor...@gmail.com>
* URL : https:
Package: getty-run
Version: 2.1.2-39.1
Severity: wishlist
X-Debbugs-Cc: morgan@mail.mcgill.ca
Dear Maintainer,
Although the scripts in the 'getty-run' package function without fgetty
installed, the package currently recommends its installation.
As a result, installing runit
Booted with Ubuntu live usb and could read and write to an SD card.
--
Bruce Morgan
blmor...@gmail.com
son the Host Control2 register of the Xenon SDHCI controller
sometimes reports the bit representing 1.8V signaling as 0 when read
after it was written as 1. Subsequent read reports 1.
This causes the sdhci_start_signal_voltage_switch function to report
1.8V regulator output did not become sta
Package: installation-reports
Severity: normal
Dear Maintainer,
New installation, error was immediate
dmesg: mmc0: Unknown controller version (5). You may experience problems
mmc0: SDHCI controller on PCI [:02:00.0] using ADMA 64-bit
mmc0: 1.8V regulator output did not become st
On Fri, May 10, 2019 at 07:21:24AM +, Andrei Morgan wrote:
> On Wed, May 08, 2019 at 06:17:03PM -0400, Daniel Kahn Gillmor wrote:
> > As a workaround, if you don't care about the existing RSA hostkey on
> > your server, you can just re-generate it with:
> >
ed fixes :)
Thanks again for all the hard work in maintaining and providing this
extremely useful package,
-- Andrei
--
Andrei Morgan MRCPCH, MSc, PhD (Epidemiology / Neonatology)
https://www.andreimorgan.net/info/contact
signature.asc
Description: PGP signature
Package: monkeysphere
Version: 0.43-2
Severity: grave
Tags: upstream a11y
Justification: renders package unusable
Dear Maintainer,
On a fresh new install of Debian Buster, I was trying to set up monkeysphere to
allow ssh access:
# monkeysphere-host import-key /etc/ssh/ssh_host_rsa_key
ssh://ser
package: linux-image-4.9.0-8-amd64
(its everything v4.)
I have never submit a bug report before, so please excuse me if i have done
this incorrectly.
when i set qos with tc, vlan's are ignored by the physical interface.
kernel version 3.16.0-6-amd64 didn't do this.
i now have to set qo
Hi,
Please find an attacher patch to get the none cipher for transport layer as
asked here. It works for openssh 7.9.
diff openssh-portable-master/cipher.c openssh-portable-master-moi/cipher.c
125c125
< if ((c->flags & CFLAG_INTERNAL) != 0)
---
> if ((c->flags & CFLAG_
I'm also unable to reproduce any longer.
--
Morgan
Control: retitle -1 ITA: easygit -- git for mere mortals
Control: owner -1 !
I intend to adopt this package
Hi,
On Mon, Jun 19, 2017 at 06:11:31PM +0100, Andrei Morgan wrote:
> This seems to be related to/the same as Bug#835719. I have just upgraded
> from 'jessie' to 'stretch' (i.e. debian stable upgrade). Now I am unable
> to use monkeysphere:
>
> 0 user@co
Package: monkeysphere
Version: 0.41-1
Severity: important
Justification: renders package unusable
Dear Maintainer,
This seems to be related to/the same as Bug#835719. I have just upgraded
from 'jessie' to 'stretch' (i.e. debian stable upgrade). Now I am unable
to use monkeysphere:
0 user@com
shipped doesn't correspond to their sources.
--
Mark Morgan Lloyd
markMLl .AT. telemetry.co .DOT. uk
[Opinions above are the author's, not those of his employers or colleagues]
returns an error (in
uip/sendsbr.c on line 446. I'm familiar enough with the codebase to know
what might be going on behind the scenes.
Please let me know if there's any more I can do to help debug.
--
Morgan Hamill
-- System Information:
Debian Release: stretch/sid
APT prefers tes
ase let me know if I can provide further debugging information.
--
Morgan Hamill
-- System Information:
Debian Release: stretch/sid
APT prefers testing
APT policy: (990, 'testing'), (500, 'unstable'), (1, 'experimental')
Architecture: amd64 (x86_64)
Foreign Ar
2tpd 1.3.6+dfsg-4.
For general info, we've been running upstream's 1.3.7 reliably here for
several months on ARM, compiled to not use the kernel. There might be
additional issues on aarch64.
--
Mark Morgan Lloyd
markMLl .AT. telemetry.co .DOT. uk
[Opinions above are the autho
Package: xl2tpd
Version: 1.3.6+dfsg-2
Severity: normal
Dear Maintainer,
Some ISPs allow a customer to connect to an L2TP LNS over an arbitrary link,
e.g. 3/4G wireless, and will then route IP6 and fixed IP addresses over this
using PPP. Please note that this usage is distinct from IPsec etc. This
I still need to set up shop on my system. I am new to the actual community,
though I've been in the woodworks on my own for quite a bit.
I'd like to try and maintain this package for some time if I get the chance. I
loved this command when I used to use Ubuntu. Here's my scheduling issue:
I'm a
I can confirm that the above patches fix the issue (well, the first
patch to the struct `xtables_globals`; I believe the latter to be
unrelated.
If the patch could be applied to the current version, or a newer version
imported, that would be great.
Thanks, Morgan Hamill
This thread upstream might be relevant:
http://permalink.gmane.org/gmane.comp.handhelds.openembedded.core/75201
--
Morgan Hamill
Package: connman
Version: 1.21-1.2+b2
Severity: grave
Justification: renders package unusable
Connman fails to start. See the attached 'connmand.out' for the segfault
which is printed on running `connmand -n --debug`.
Thanks for your help.
--
Morgan Hamill
-- System Information:
Debi
The release version has also been patched, in svn
https://hedgehog.fhcrc.org/bioconductor/branches/RELEASE_3_2/madman/Rpacks/genefilter
Martin
From: Andreas Tille
Sent: Wednesday, January 27, 2016 10:09 AM
To: Morgan, Martin
Cc: 812
Thanks Andreas; that's a strange thing to have been around for all these years.
It's fixed in version 1.53.1 (devel) and will be ported to release later today.
Martin
From: devteam-bioc-boun...@lists.fhcrc.org
on behalf of Maintainer
Sent: Wednesday,
On Thu, 10 Dec 2015 22:43:41 +0100 Salvatore Bonaccorso wrote:
> Source: grub2
> Version: 1.99-27
> Severity: important
> Tags: security upstream patch
>
> Hi,
>
> the following vulnerability was published for grub2.
>
> CVE-2015-8370[0]:
> buffer overflow when checking password entered during b
On Thu, 10 Dec 2015 22:43:41 +0100 Salvatore Bonaccorso wrote:
> Source: grub2
> Version: 1.99-27
> Severity: important
> Tags: security upstream patch
>
> Hi,
>
> the following vulnerability was published for grub2.
>
> CVE-2015-8370[0]:
> buffer overflow when checking password entered during b
ppy to make any subsequent changes to rtracklayer.
Also, please note that the src/ucsc/* is NOT 'stolen', and that the 'meat' of
the rtracklayer package extends considerably beyond Kent's (very valuable) code.
Best,
Martin Morgan
Bioconductor
Any way I can help move this along?
--
Morgan Hamill
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Package: texlive-latex-extra
Version: 2014.20141024-1
Severity: normal
Dear Maintainer,
Install texlive-extra-utils, then run:
$ exceltex
Can't locate Spreadsheet/ParseExcel.pm in @INC (you may need to install
the Spreadsheet::ParseExcel module) (@INC contains: /etc/perl
/usr/local/lib/x86_64-li
ttings:
E117: Unknown function: netrw#NetrwSavePosn
Thanks,
C. Morgan Hamill
-- System Information:
Debian Release: jessie/sid
APT prefers testing
APT policy: (990, 'testing'), (500, 'unstable'), (1, 'experimental')
Architecture: amd64 (x86_64)
Kernel: Linux 3.16-3-
S EXTERNAL LOGIN PLAIN SECURID DIGEST-MD5 CRAM-MD5 SCRAM-SHA-1
SAML20 OPENID20
I looked in the source for the gsasl package, and could find nothing
that indicated GSSAPI had been intentially disabled.
Any help would be appreciated.
Yours, C. Morgan Hamill
-- System Information:
Debian Rel
Package: wicd-daemon
Version: 1.7.2.4-4.1
Severity: wishlist
Dear Maintainer,
While this is just a "wishlist" item, it is very important for the way
I use my laptops.
It is becoming increasingly common for people to use laptops on a
variety of different networks, along with VPNs and virtual mach
Package: wicd-daemon
Version: 1.7.2.4-4.1
Severity: important
Dear Maintainer,
For months now I've noticed wicd fails to allow me to configure my
wired interface with a static address. Typically I end up just
killing the daemon and client and doing it manually. But it is
getting to be really a
retitle 757192 ITA: cvc3 - Automatic theorem prover for SMT problems
owner 757192 !
ere are a few things I'd like to improve with the package, but may
need some assistance.
Thanks,
Morgan
--
Morgan Deters
Senior Research Scientist
Courant Institute of Mathematical Sciences
251 Mercer St., New York, NY 10012
mdet...@cs.nyu.edu - http://cs.nyu.edu/~mdeters/
Package: wnpp
Severity: wishlist
Owner: Morgan Deters
* Package name: cvc4
Version : 1.4
Upstream Author : Morgan Deters
* URL : http://cvc4.cs.nyu.edu/
* License : BSD
Programming Lang: C++
Description : An automatic theorem prover for SMT problems
Package: sikuli-ide
Version: 1.0~x~rc3.tesseract3-dfsg1-7
Severity: grave
Tags: patch
Justification: renders package unusable
Dear Maintainer,
the default install of sikuli-ide in testing (Jessie) running on OpenJDK throws
a java.lang.NoClassDefFoundError due to missing jars on the classpath.
"E
is
awful (rather than just silly) about the naming? I just don’t see how if we
don’t namespace collide on the executable side, how there can be any real
confusion (python-bash8, sure pypi is a little different) over what is being
installed.
Cheers,
Morgan
—
Morgan Fainberg
From: Thomas
Package: sup-mail
Version: 0.12.1+git20120407.aaa852f-1+deb7u1
Severity: grave
Justification: renders package unusable
Dear Maintainer,
As of libxapian-ruby1.9.1 1.2.17-1 (which is a transitional package to
ruby-xapian 1.2.17-2), sup-mail no longer launches successfully.
The ruby-xapian package
replacing kde-window-manager (and dependencies) from the version in jessie
to the version in sid fixes the issue, however, it introduces other bugs so
cannot be considered a fix.
Similar issues have been reported (and supposedly fixed) upstream - see KDE
bugs 326352 and 329908, so it would seem th
Package: sup-mail
Version: 0.12.1+git20120407.aaa852f-1+deb7u1
Severity: wishlist
Dear Maintainer,
The packaged version of sup is far behind upstream, which seems to have
moved to <http://supmua.org>. An updated package would be greatly
appreciated.
Thanks you.
--
Morgan Hamill
--
Dear kdeconnect maintainer,
I have noticed the following dependencies are required for kdeconnect to
work, without them my laptop cannot see my nexus 4 device and vice versa.
libqca2-plugin-gunpg
libqca2-plugin-ossl
These dependencies do not seem to have been pulled in by an installation of
kdec
I've found this patch to resolve the problem:
http://archive.linuxvirtualserver.org/html/lvs-users/2011-08/msg00033.html
I'm attaching the relative portion for your convenience.
ipvsadm-1.26/libipvs/ip_vs.h
416c416
< #define IPVS_CMD_ATTR_MAX (__IPVS_SVC_ATTR_MAX - 1)
---
> #define IPVS_CMD_AT
If there's any way for my last response to be removed/redacted, please
enforce it. I'm in no position to be responding here
My apologies.
On Jan 7, 2014 2:28 AM, "Zach Morgan" wrote:
> This is addressed in an ANCIENT bug report. My organization has worked
> around i
This is addressed in an ANCIENT bug report. My organization has worked
around it for months. Please don't act like you're the only one affected by
stable's slow uptake of drivers.
If you want "desktop" support, use a "desktop" distro.
Quoting Igor Levicki (i...@levicki.net):
> Exactly what is pre
Package: update-manager-core
Version: 0.200.5-1
Severity: normal
File: /usr/share/pyshared/UpdateManager/Backend/PythonApt.py
*** /tmp/update-manager-bug1Aay8m
The information below has been automatically generated.
Please do not remove this from your bug report.
- Exception Type:
- Exception
Package: src:linux
Version: 3.2.51-1
Severity: important
Dear Maintainer,
I'm trying to use cryptsetup to create a loopback encrypted disk volume.
Here's approximately what I did:
# dd if=/dev/urandom of=main.disk bs=1M count=1
# cryptsetup -y -v luksFormat --cipher aes-xts-plain64 -s 51
which will not be accepted. Since
Martin Morgan pointed me in previous cases to the documentation inside
the package I tried to verify this first but failed. Here are the
files in Question:
you don't mention the version you're trying to port; the following is from
https://hed
On 10/16/2013 06:36 AM, Andreas Tille wrote:
Hi Martin,
On Wed, Oct 16, 2013 at 06:02:03AM -0700, Martin Morgan wrote:
For precomputed_results above, it looks like these could be
generated by a script, but the specific results depend on a web
service query and the web service changes from
On 10/16/2013 06:36 AM, Andreas Tille wrote:
Hi Martin,
On Wed, Oct 16, 2013 at 06:02:03AM -0700, Martin Morgan wrote:
For precomputed_results above, it looks like these could be
generated by a script, but the specific results depend on a web
service query and the web service changes from
On 10/16/2013 01:37 AM, Andreas Tille wrote:
Hi Martin,
On Sat, Oct 12, 2013 at 09:59:35AM -0700, Martin Morgan wrote:
On 10/12/2013 02:59 AM, Maintainer wrote:
Hi,
the Debian Med team tries to package several parts of BioConductor.
When trying to upload GenomicRanges our ftpmaster
On 10/12/2013 02:59 AM, Maintainer wrote:
Hi,
the Debian Med team tries to package several parts of BioConductor.
When trying to upload GenomicRanges our ftpmaster criticised that the
source contains some precomputed results inside the documentation which
is in conflict with our policy which req
e the name of the
user to some specified form, in which case you'd also want to patch
'/etc/mock/site-defaults.cfg' to make the appropriate change to the
'chrootgid' config option.
--
C. Morgan Hamill
-- System Information:
Debian Release: jessie/sid
APT prefers testin
I'm running Mint 14 with Josm-latest on a 64-bit machine with no
problems. Mint highly recommended.
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Package: cu
Version: 1.07-20
Severity: normal
Dear Maintainer,
Scenario is an Ultra Enterprise 2 connecting using cu to the serial port on a
headless E4500. When the E4500 is powered up cu becomes non-responsive to kbd
input including the #. abort sequence, the only way to terminate it is to use
k
Can you get a tcpdump trace?
I should be able to: if I bypass XDMCP it should be a manageable size as
an attachment (even if I can't make sense of it enough to cut off the
earlier part of the session).
--
Mark Morgan Lloyd
markMLl .AT. telemetry.co .DOT. uk
[Opinions above are the aut
Package: xorg
Version: 1:7.7+1
Severity: important
Dear Maintainer,
I run a range of development systems here of different architectures, in most
cases "headless" with connection via X usually using xdmcp. This fails with
a SPARC Wheezy host (i.e. the machine being connected to), irrespective of
t
Package: kde-plasma-desktop
Version: 5:77
Severity: important
Dear Maintainer,
When KDE first starts for any given newly-created user, it has a background
image,
a panel/bar at the bottom, and a desktop tab at the top right. However there is
no
other content: no menu button, no clock display etc
Pino Toscano wrote:
Alle giovedì 1 novembre 2012, Mark Morgan Lloyd ha scritto:
Automatic bug report dialogue generates a partial backtrace but
suggests installing debug info for knotify4 but does not say what
package contains this.
Usually, debug packages are named after the names of sources
bug report
number within
an hour; if you haven't received a confirmation, then the bug reporting process
failed at some point (reportbug or MTA failure, BTS maintenance, etc.).
--
Andrei Morgan MRCPCH, MSc. (Epidemiology)
signature.asc
Description: Digital signature
> Please install kdelibs5-dbg and try generating the backtrace.
Dialogue still says it's NBG. On this run I got a Knotify crash at the
start of the session, and another when I told it to logout. Backtrace
attached.
--
Mark Morgan Lloyd
markMLl .AT. telemetry.co .DOT. uk
[Opinions a
Package: kde-runtime
Version: 4:4.8.4-1
Severity: normal
File: knotify
Dear Maintainer,
On an up-to-date Wheezy with KDE desktop, knotify crashes during desktop
startup or shutdown. I've not yet tested on other CPUs.
Automatic bug report dialogue generates a partial backtrace but suggests
install
tach
its output
Two files attached (gdb stdout and stderr).
Thanks for your help, Pino.
--
Mark Morgan Lloyd
markMLl .AT. telemetry.co .DOT. uk
[Opinions above are the author's, not those of his employers or colleagues]
GNU gdb (GDB) 7.4.1-debian
Copyright (C) 2012 Free Software Foundati
As of October 2012, this appears to apply to both Squeeze and
Wheezy/testing. It also applies irrespective of whether Konsole is
invoked from KDE or XFCE. I've not been able to get a useful backtrace etc.
--
Mark Morgan Lloyd
markMLl .AT. telemetry.co .DOT. uk
[Opinions above are the aut
Yes, many more lessons are needed.
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
ce I don't think it's a
Linux or SILO problem. The most that can be done is make sure a warning
is available in an appropriate place in platform-specific notes.
--
Mark Morgan Lloyd
markMLl .AT. telemetry.co .DOT. uk
[Opinions above are the author's, not those of his employe
sibly different PCB- fail
the first boot.
This might still be specific to OBP in a Netra T1, both types of disc
boot first time in an Ultra-1. It affects Lenny, Squeeze and Wheezy, and
possibly other OSes.
--
Mark Morgan Lloyd
markMLl .AT. telemetry.co .DOT. uk
[Opinions above are the author's,
> Looking at the output you see, I have doubts that it has anything
> to do with SILO though. SILO prints letters 'S', 'I', 'L' and 'O'
> (appearing before the prompt) after it completes execution of
> different parts of first-stage loader. As you can see in the code
> (first/first.S), printing 'S
Package: silo
Version: 1.4.14+git20120819-1
Severity: normal
On a Netra T1 200 with default installation (no desktop packages etc.)
and with a serial terminal attached to the LOM port as console, the
first boot command after power-on, reset or reboot fails with a watchdog
timeout before SILO p
Package: wnpp
Severity: wishlist
* Package name : Netlogo
Version : 5.0
Upstream Author : Uri Wilensky
* URL : http://ccl.northwestern.edu/netlogo/
* License : GPL version 2, or any later version
Programming Lang: Scala and Java
Description : An agent-ba
Package: wnpp
Severity: wishlist
* Package name: Netlogo
Version : 5.0
Upstream Author : Uri Wilensky
* URL : http://ccl.northwestern.edu/netlogo/
* License : GPL, version 2 or any later version
Programming Lang: Scala with parts in Java
Description :
Package: debsums
Version: 2.0.48
Severity: wishlist
Tags: patch
I have made a small modification to debsums (modified version attached). I
have added the following option:
-x, --report-mismatches report errors and print the md5sums mismatch
which corresponds to:
if ($report)
{
Hi.
I guess I'm a little confused. Why would it not make sense to make a
so.1 symlink to the .so.1.1.1 library? I don't see why one would want
them to differ. The 0.8 symlink could remain right?
Chris
On Jan 29, 2012, at 5:40 PM, Romain Francoise wrote:
> Chris Morgan writes:
Package: libpcap0.8
Version: 1.1.1-8
Severity: important
File: libpcap
I'm the developer of SharpPcap, a c# library that interacts with libpcap.
Noticed that it wasn't working
on my system because the mapping from windows dll to linux dll was broken.
Previously I was able to map
from wpcap to l
Package: libwavpack1
Hey,
This is a patch for libwavpack1 to able multiarch support as described
at http://wiki.debian.org/Multiarch/Implementation. Please consider
applying it to your package.
Thank You ,
Becka Morgan
diff -Nru wavpack-4.60.1/debian/changelog wavpack-4.60.1/debian
There's a new version of spim upstream, so I'll work on packaging that.
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Package: gscan2pdf
Version: 0.9.29-1ubuntu1
#...@-desktop:~$ gscan2pdf --debug
(12556): Couldn't connect to query server: IO::Socket::INET: connect:
Connection refused at /usr/lib/perl5/forks.pm line 3620
threads::_croak('Couldn\'t connect to query server: IO::Socket::INET:
connect:...') c
Package: wnpp
Severity: wishlist
Owner: Mackenzie Morgan
* Package name: gally
Version : 0.5-1
Upstream Author : Mackenzie Morgan
* URL : http://launchpad.net/gally
* License : GPL
Programming Lang: Python
Description : teaches sign languages
Gally
everything works fine.
Yours, Morgan Hamill
cham...@wesleyan.edu
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
can provide (or any instructions you can give
me as to what information I ought to provide you).
Yours, Morgan Hamill
cham...@wesleyan.edu
-- System Information:
Debian Release: squeeze/sid
APT prefers testing
APT policy: (990, 'testing'), (500, 'unstable'), (1, 'experi
Hi I'm the person maintaining it in Ubuntu. I already uploaded a package to
Debian Mentors about a month ago. Mako said he would sponsor it.
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
On Mon, Jan 11, 2010 at 9:08 AM, John Zaitseff wrote:
> Dear Dmitrijs et al.,
>
> > > I sent an e-mail to the Debian bug tracker about a new version
> > > of the World English Bible (WEB) module almost three years ago.
> > > Unfortunately, no one seems to have done anything about it.
> >
> > pkgcr
Package: nail
Version: 12.3+cvs20080629-1
Severity: normal
The man entry for nail points to heirloom.1.gz when it should most likely be
pointing to heirloom-mailx.1.gz. Attempting to view the man page with 'man
nail' results in a 'Dangling symlink' error.
-- System Information:
Debian Release:
What's the status of this? Do you not buy my arguments about why
ncurses-ruby should be linked against libncursesw? (Namely, it would
enable multibyte Ruby curses programs, and it wouldn't break anything.)
Or are you, or anyone else, planning on producing a ncursesw-ruby?
--
William
--
To UNS
Hi.
On Aug 19, 2009, at 3:18 PM, Sebastian Harl wrote:
Hi again,
On Sat, Jul 04, 2009 at 08:29:49PM -0600, thomas morgan wrote:
There is some kind of incompatibility between collectd and powerdns
2.9.22. With powerdns support enabled in collectd, collectd connects
to powerdns's unix s
Hello,
thanks, but ... pychess still need python-rsvg, which is part of
python-gnome2-desktop, as a strong dependencie. Could you please make
pychess depends on python-rsvg ?
Le lundi 10 août 2009 à 06:00 +, Debian Bug Tracking System a
écrit :
> This is an automatic notification regarding yo
The error message about 'Filter subsystem' is incorrect and should be
ignored -- that was something else here (unrelated to this particular
bugreport).
Everything else in the bugreport is accurate I believe. Also, the
exact powerdns version used is 2.9.22-1~bpo50+1.
--t
--
To UNSUBSCR
Package: collectd
Version: 4.6.3-1~bpo50+1
Severity: normal
There is some kind of incompatibility between collectd and powerdns 2.9.22.
With powerdns support enabled in collectd, collectd connects to powerdns's unix
socket.
The connection hangs indefinitely. Further, it seems to cause collectd
Does linking libcurses-ruby against ncursesw break legacy ASCII-only
ncurses applications? I suspect not, but I could be wrong.
Using a ruby ncurses library linked against ncursesw isn't *sufficient*
for an app to magically work with non-ASCII encodings, as you
illustrate. However, it is *necessar
pompous pyre
wright scramble
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Hi there,
This is just another small reminder: herrie is still uninstallable in
sid, and I really miss it!
Cheers,
Morgan
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
probably do the same: no audio file can be played with the current default
install...
Best regards, Morgan.
-- System Information:
Debian Release: 5.0
APT prefers unstable
APT policy: (500, 'unstable')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.28-1-amd64 (SMP w/2 CPU cores)
Lo
Package: silo
Version: 1.4.13-1
Severity: wishlist
Splack (Slackware for SPARC) has a section in silo.conf reading
-8<-
image="cat /boot/silo.conf"
label="config"
->8-
Having this makes it easier to see what kernels are available when
booting, e.g. because an upgraded
Your patch was accepted upstream, closing
http://dev.sugarlabs.org/ticket/20. The fix will be included in
release 0.4.9.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Logged upstream as http://dev.sugarlabs.org/ticket/20
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
1 - 100 of 164 matches
Mail list logo
