Package: systemd
Version: 252.3-1
Severity: normal
X-Debbugs-Cc: zieg...@uni-freiburg.de
Dear Maintainer,
"reboot" fails to boot into the grub-menu, as well as the command
"systemctl reboot". The least kernel in the grub menu is booted
instead.
"systemctl reboot --boot-loader-menu=5" gives an er
Package: stellarium
Version: 0.13.2-1
Severity: normal
Tags: upstream
The programm seems to work normally. But the startup log says:
Detected: OpenGL "2.1"
Driver version string: "2.1 Mesa 10.3.2"
GL vendor is "Intel Open Source Technology Center"
GL renderer is "Mesa DRI Intel(R) Ironlake M
Thanks!
Martin
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Sorry, this is no bug. The reason for the incriminated
behavios was the "NotScripts"
extension.
Regards
Martin
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Package: chromium
Version: 40.0.2214.91-1
Severity: normal
Chromium fails to load debian-bug pages like
https://bugs.debian.org/cgi-bin/pkgreport.cgi?pkg=3Dchromium;dist=3Duns=
table
with the message: "The page has become unresponsive".
iceweasel loads the pages without problems.
-- System
Package: stellarium
Version: 0.13.1-1
Severity: normal
If I start stellarium with the option "--screenshot-dir ~/foo",
the directory ~/foo is used for screenshots, but the
default screenshot directory
~/Pictures/stellarium
is still generated if it does not exist.
-- System Information:
Debian
Dear Evgeni,
I succeeded to install grml on the same usbstick,
doing the following:
1. the partion label was "loop". I changed it to "msdos"
2. I formatted /dev/sdb1 with mkfs.fat instead of mkfs.vfat
After this df was as fast as it should be
(I used /dev/sdd1 before, since the other device-n
Dear Evgeni,
here is the output of fdisk:
Disk /dev/sdb: 7,2 GiB, 7745830400 bytes, 15128575 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x2c6b736
stellarium 0.13.1-1 works again.
Thanks
Martin
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Addendum:
With
LIBGL_ALWAYS_SOFTWARE=1 stellarium
stderr changed as follows:
10,13c10,13
< OpenGL versions supported: "1.1, 1.2, 1.3, 1.4, 1.5, 2.0,
2.1, 3.0"
< Driver version string: "3.0 Mesa 10.2.5"
< GL vendor is "VMware, Inc."
< GL renderer is "Gallium 0.4 on llvmpipe (LLVM 3.4, 128
I tried
LIBGL_ALWAYS_SOFTWARE=1 stellarium
The bug is still there, no change.
Regards,
Martin
Am Mi 20 Aug 2014 10:18:00 CET schrieb Tomasz Buchert:
Hi guys,
I suspect it may have nothing to do with OpenGL.
Could you please run this:
LIBGL_ALWAYS_SOFTWARE=1 stellarium
--
To UNSUBS
Yes, libqt4-opengl ist installed, djview4 depends on it.
When I saw #757150 [stellarium: Fails to display], I
removed libqt4-opengl and djview4. Unfortunately this did
not help.
Regards
Martin
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscr
I attach the glxinfo output.
Regards,
Martin
name of display: :0
display: :0 screen: 0
direct rendering: Yes
server glx vendor string: SGI
server glx version string: 1.4
server glx extensions:
GLX_ARB_create_context, GLX_ARB_create_context_profile,
GLX_ARB_fbconfig_float, GLX_ARB_frame
My computer is a Lenovo T510. Stellarium's stderr gives
OpenGL versions supported: "1.1, 1.2, 1.3, 1.4, 1.5, 2.0,
2.1"
Driver version string: "2.1 Mesa 10.2.5"
GL vendor is "Intel Open Source Technology Center"
GL renderer is "Mesa DRI Intel(R) Ironlake Mobile "
as graphics driver an
This is a multi-part MIME message sent by reportbug.
--==(71226339623027939=Content-Type: text/plain; charset="us-ascii"
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit
Content-Disposition: inline
Package: stellarium
Version: 0.13.0-2
Severity: grave
Justification: renders package
The bug does not occur any longer with libfreetype6 version
2.5.2-1.1.
Martin Ziegler
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
The bug has disappeard in the new version
34.0.1847.132-1 which came today
Thanks
Martin
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Package: comix
Version: 4.0.4-1
Severity: normal
Dear Maintainer,
debsum reports false (as I hope) positives on compiled python-files.
See the list below.
Regards
Martin
-- System Information:
Debian Release: jessie/sid
APT prefers testing
APT policy: (990, 'testing'), (50, 'unstable'), (1
Thanks,
Martin
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
-flashplugin-nonfree will download it again.)
(Martin Ziegler)
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Package: flashplugin-nonfree
Version: 1:3.4
Severity: important
I wanted to update to the new flash-plugin version 341:
$ update-flashplugin-nonfree --status
Flash Player version installed on this system : 11.2.202.336
Flash Player version available on upstream site: 11.2.202.34
I reactivated APT::Get::List-Cleanup and everything is fine
now. I think I had set
APT::Get::List-Cleanup false
to keep package lists of old servers if I changed to a new
server. This should save bandwith in case I would change
back again.
Regards
Martin
--
To UNSUBSCRIBE, email to debia
Yes, I had
APT::Get::List-Cleanup "false";
since a long time. But the problems started only two weeks
ago.
There are two strange things which have happend in the last
two or three weeks
* apt-get does not longer remove pdiff-files from
/var/lib/apt/lists (this is new)
* apt-get reacts
A simple workaround seems to be
to do
rm /var/lib/apt/lists/*.gz
each time before
apt-get update
Regards
Martin
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Starting two weeks ago the downloaded diff-files like
http.debian.net_debian_dists_experimental_main_source_Sources.ed.2014-02-10-0246.39.gz
are not longer removed after "apt-get download" but stay in
/var/lib/apt/lists. The next time apt-get downloads a
diff-file, like for example
http.de
uot;false";" . So it
seems that the PDiff-mechanism is broken.
I run debian testing/unstable. The apt version is 0.9.15.1.
(Martin Ziegler)
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
I tested older versions of libfreetypes6. The bug
occurs in 2.5.2-1 and 2.5.1-2 but not in .4.9-1.1.
Martin
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Dear Norbert,
I attach test1.dvi and test2.dvi. After
$ cp test1.dvi test.dvi
$ xdvi test.dvi &
$ cp test2.dvi test.dvi
and a mouse-click into the xdvi-window
xdvi _invariably_ crashes on my machine.
Regards
Martin
test1.dvi
Description: TeX dvi file
test2.dvi
Description: TeX dvi file
If a dvi-file is updated and I click on the xdvi-window to reload the
file, the program crashes. At least if the changes of the file are
locate at the very beginning this happens very often ca in 20% of the
cases I tried it.
I attach xdvi's error message.
This is a multi-part MIME message sent
The trick also works here. Thanks!
Martin
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Sorry, I forget to sent the actual bug-report. Here it is:
If one choses (in the Print dialog window) to print a page
to a file in the home directory, this silently fails. The
file will not be created. Printing to files in other
directories works fine.
--
To UNSUBSCRIBE, email to debian-bu
Package: chromium
Version: 28.0.1500.95-3
Severity: normal
Dear Maintainer,
*** Please consider answering these questions, where appropriate ***
* What led up to the situation?
* What exactly did you do (or not do) that was effective (or
ineffective)?
* What was the outcome of this
From syslog:
kernel: aptitude[14203]: segfault at 7fbf6284b000 ip
7fb368b4b47a sp 7fff9aa04a30 error 4 in\
libapt-pkg.so.4.12.0[7fb368ab6000+127000]
kernel: apt-show-versio[14512]: segfault at 7fca41a0f000 ip\
7fbe4581747a sp 7fffa184d9e0 error 4 in\
libapt-pkg.so.4.12.
From syslog:
kernel: aptitude[14203]: segfault at 7fbf6284b000 ip
7fb368b4b47a sp 7fff9aa04a30 error 4 in\
libapt-pkg.so.4.12.0[7fb368ab6000+127000]
kernel: apt-show-versio[14512]: segfault at 7fca41a0f000 ip\
7fbe4581747a sp 7fffa184d9e0 error 4 in\
libapt-pkg.so.4.12.
linux-image-amd64 3.2+46 install ok installed
linux-image-amd64 3.2+46 testing http.debian.net
linux-image-amd64 3.8+47 unstable http.debian.net
No experimental version
linux-image-amd64/testing uptodate 3.2+46
Regards
Martin
(Martin Ziegler)
--
To UNSUBSCRIBE, email to d
Package: autotrash
Version: 0.1.5-1
Severity: normal
Files of the form .foo in ~/.local/share/Trash are not purged by
autotrash. The reason is that
glob.iglob("~/.local/share/Trash/info/*.trashinfo")
ignores ~/.local/share/Trash/info/*.foo.trashinfo.
-- System Information:
Debian Release: 7
Package: alpine
Version: 2.02+dfsg-2
Severity: normal
If the variable reply-leadin contains _PREFDATETIME_, as for example
reply-leadin=On _PREFDATETIME_ you wrote:
the weekday in the reply is alway sunday, as for example
On Sun Nov 7 13:48:00 2012 you wrote:
-- System Information:
D
Indeed, not all scripts were updated. I did this now
"manually", and everything works fine now! Sorry for the
noise.
Thanks,
Martin
PS: I did not find out how to tell
aptitude to update all init-scripts.
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of
Package: initscripts
Version: 2.88dsf-32
Severity: important
During boot checkroot-bootclean.sh deletes part of /run/udev,
so that X cannot be started.
The reason might be that mountkernfs.sh creates files ".ramfs" in the
tmpfs-directories, while /lib/init/bootclean.sh expects ".tmpfs".
Martin
The bug vanished in version 21.0.1180.57~r148591-1.
Regards,
Martin
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
I forgot to mention that version 18.0.1025.151~r130497-1
works fine.
Martin
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Package: chromium
Version: 20.0.1132.43~r143823-1
Severity: important
chromium waits endlessly for a connection to
https://chrome.google.com/webstore. This prevents chromium from
loading new extensions. If the extension "ghostery" is loaded, also
other pages cannot be loaded. The message is "Wait
Actually the invisible directory xxx/xxx created by "btrfs
subvolume snapshot . xxx" can be removed by "rmdir xxx/xxx".
(Martin Ziegler)
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Package: btrfs-tools
Version: 0.19+20120328-4
Severity: normal
On the toplevel of a subvolume (or of the btrfs-file system itself)
issue the command
btrfs subvolume snapshot . xxx
The snapshot xxx now contains itself as an invisible subdirectory,
which becomes visible if we produce a snapsho
I changed mimemap, mimeview and mimeconf in ~/.recoll as
suggested: Things are back to normal.
Thanks for the help!
Martin
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Package: recoll
Version: 1.17.2-1
Severity: important
In the new version the gui opens compressed textfiles (like
textfile.txt.gz, textfile.txt.bz2, textfile.txt.zip) with gnumeric.
This is because the uncompressed files are saved in temporary
files like /tmp/rcltmpfchWV69.csv, which are then op
mplayer said that the output device was pulse:
AO: [pulse]
Wenn I use mplayer with the option "-ao alsa" everything
works fine. Thanks!
It might be interesting that the version of mplayer in the
package "mplayer" does not hit this bug. It works also with
the option "-ao pulse".
Regards,
M
Package: mplayer2
Version: 2.0-554-gf63dbad-1
Severity: normal
mplayer AUDIOFILE
plays the file, but does not exit at the end. When several files are
given in the commandline, mplayer stops playing after the first file
and continues with the next file only after the return key is pressed.
Regar
Package: keyboard-configuration
Version: 1.76
Severity: normal
If /etc/default/keyboard is a symbolic link, the file it points to is
zeroed by the installation of keyboard-configuration.
Regards,
Martin
-- System Information:
Debian Release: wheezy/sid
APT prefers testing
APT policy: (990
the bug was fixed in version 2:3.2.5-1
Regards,
Martin
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
I found out the following:
Also in the case that mod1 is loaded
modprobe -r mod1 mod2
removes only mod1 and not mod2. But
modprobe -ra mod1 mod2
works fine and removes mod1 and mod2, even if
mod1 is not loaded. This manual page does not mention this.
Regards,
Martin
--
To UNSUBSCR
Package: kmod
Version: 6-1.1
Severity: normal
If the module mod1 is not loaded, the command
modprobe -r mod1 mod2
fails and does not unload mod2! This is a disturbing change
of behaviour compared with module-init-tools.
Regards,
Martin
-- System Information:
Debian Release: wheezy/sid
A
If the module mod1 is not loaded, the
command
modprobe -r mod1 mod2
fails and does not unload mod2! This is a real change
of behaviour compared with module-init-tools.
Regards,
Martin
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trou
Dear David,
I tested wicd 1.7.1-1 in the Frankfurt Airport and it worked
well:
root@zertz:/usr/local/sbin# wicd-cli -ly
# BSSID Channel ESSID
0 00:0E:D7:B2:9F:71 1 \x00
1 00:0E:D7:B2:9F:73 1 \x00
2 00:0E:D7:B2:9F:70 1
wicd 1.7.1~b3-4 still does not work in German ICE trains.
The last version which worked was 1.7.0+ds1-9. Here is my test
from yesterday (Thinkpad T510, driver:iwlwifi, kernel >= 3.1)
The two scanresults are from the same train, with a time difference of
20 minutes.
Version 1.7.0+ds1-9 works:
+++
libc6_2.13-16 also does not work with the newest
kernel (this time version 3.1.0-rc5).
Sorry for the false alarm,
Martin
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
I could not find libc6-amd64_2.13-16.deb.
But flock() in libc6 version 2.13-18 works with
kernel 3.1.0-rc3.
I will report the bug to kernel.org,
when it is online again.
Martin
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble
Package: libc6
Version: 2.13-18
Severity: important
After upgrading from 2.13-16 to 2.13-18, flock() stopped working
for files in encfs-encoded directories.
strace yields
open("foo", O_RDWR) = 3
flock(3, LOCK_SH) = -1 ENOSYS (Function not implemented)
Dear David,
thanks for Your help! I have now
try:
import ctypes
from ctypes.util import find_library
libc = ctypes.CDLL(find_library('c'))
return True
in misc.py, which works fine.
Martin
PS: Your patch seems to delete
libc.prctl(15, new_name, 0, 0, 0)
--
T
Package: python-wicd
Version: 1.7.0+ds1-6
Severity: normal
/usr/share/wicd/cli/misc.py defines a function RenameProcess()
which searches libc.so.6 only in the directories /lib64 and /lib.
On my system libc.so.6 is in /lib/x86_64-linux-gnu and /lib32. The
directory /lib64 does not exist.
-- Sys
Good news: The dependency on cups
was removed in the latest version.
(foo2zjs_20110722dfsg-1)
Martin
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Package: wicd-daemon
Version: 1.7.0+ds1-6
Severity: normal
/etc/init.d/wicd stop invokes
start-stop-daemon --stop [--quiet] --retry=TERM/30/KILL/5 --pidfile
/var/run/wicd/wicd.pid --name wicd
and
start-stop-daemon --stop [--quiet] --oknodo --retry=0/30/KILL/5 --exec
/usr/sbin/wicd
The first
I switched back to lprng some time ago, because I found it
easier to use that cups. I need foo2zjs for my HP-Laserjet.
Now the last version of foo2zjs ((20110210dfsg-1) depends on
cups-client:
(From the Changelog)
* debian/control:
+ Add dependency on cups and cups-client to ensure that
Package: foo2zjs
Version: 20110210dfsg-2
Severity: important
The new version of foo2zjs depends on cups-client, which conflicts
with lprng.
I need foo2zjs my HP-Laserjet and I use lprng because I could not
configure cups for another printer I have.
Regards,
Martin
-- System Information:
Debi
Dear Jonathan,
I use now bash 4.1-3. The bug does not exist any more!
Regards,
Martin
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Package: xserver-xorg-video-intel
Version: 2:2.12.0+shadow-2
Severity: important
X does not start if /etc/modprobe/i915-kms.conf contains
options i915 modeset=0.
Xorg.0.log:
(EE) intel(0): No kernel modesetting driver detected.
(II) UnloadModule: "intel"
(EE) Screen(s) found, but none have a usab
(Resource temporarily unavailable)
on X server ":0.0" after 110 requests (110 known processed)
with 0 events remaining.
The bug vanished after I downgraded to 2:2.9.1-4
and removed libxcb-dri2-0.
(Martin Ziegler)
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.
Dear Maximilian,
the bisecting resulted in
+
c5a4bcd0cac546c5d776af881c5e913ba4a9922d is the first bad
commit
commit c5a4bcd0cac546c5d776af881c5e913ba4a9922d
Author: Takashi Iwai
Date: Fri Feb 6 17:22:05 2009 +0100
ALSA: hda - Use digital beep for AD codecs
The batch file I used was of course
#
{ sleep 2 ; echo two ; } &
{ sleep 4 ; echo four ; } &
wait
echo ok
#---
(Martin Ziegler)
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Troubl
Package: dash
Version: 0.5.5.1-5
Severity: important
Since version 0.5.5.1-5 the inbuild wait command of dash waits only
for the first asychronous command to to complete. To reproduce
consider the following batch file xxx:
#---
{ sleep 2 ; echo five ; } &
{ sleep 4 ; echo ten
Package: ncftp
Version: 2:3.2.4-1
Severity: normal
ncftpls -i stopped working in version 2:3.2.4-1
For example the command
ncftpls -i XXX ftp://foo.de/foo/
yields
Not a URL: XXX
-- System Information:
Debian Release: squeeze/sid
APT prefers testing
APT policy: (990, 'testing'), (50,
Package: libssl0.9.8
Version: 0.9.8m-1
Severity: important
Version 0.9.8m-1 cannot decrypt encfs-encoded directories:
$ encfs rootdir mountPoint
EncFS Password:
13:58:20 (SSL_Cipher.cpp:832) encoding 40 bytes, got back 32 (0 in final_ex)
Error decoding volume key, password incorrect
Downgrading
On Tue, 16 Feb 2010, maximilian attems wrote:
the best would probably be a bisect on linux-2.6 upstream
between 2.6.29 and 2.6.30, do you need guidance on that?
I'd like to do that. How do I find (compile?) the older
kernels?
Martin
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@l
Yes, with linux-image-2.6.32-2-686 2.6.32-8
it is still the same.
Martin
On Sat, 13 Feb 2010, maximilian attems wrote:
On Sun, 28 Jun 2009, Martin Ziegler wrote:
It seems to be only a boot problem:
After "modprobe -r pcspkr; modprobe pcspkr"
the console beeps again.
hmm does st
Yes, the bug could be closed.
(But perhaps one should mention in the manpage that
hyperlinks work only in Maginfier mode?)
Many Thanks
Martin
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Dear all
Yes, in Magnifier Mode the hyperlinks work fine, thanks!
In Text Selection they do not work, even if I choose
the point carefully.
Regards,
Martin
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lis
Package: bmf
Version: 0.9.4-3
Severity: normal
If you run two commands "bmf -p -i bigfile" at the same time,
they fail with the error-message "bmf: cannot merge/save list".
(While there are no error messages for "bmf -i bigfile" !)
So, if used in .procmailrc, I think bmf should better be
protected
Here is an example.
And, by the way, the links work fine with dvisvga.
Regards,
Martin
\documentclass{article}
\usepackage[hypertex]{hyperref}
\newtheorem{remark}{Remark}
\begin{document}
This is a link to Remark \ref{remark} on the next page.
And this a link to Section \ref{section}.
\newp
Package: texlive-binaries
Version: 2009-5
Severity: normal
Hyperlinks in dvi-files created with \usepackage[hypertex]{hyperref}
do not work with the new xdvi.
The anchor text has blue color, as it should be. But if the mouse
pointer is over the text, it does not change its appearance and left
cli
Dear Rogerio,
I moved my xorg.conf out of the way and could configure
console-setup without any problems. Thanks for the hint.
In xorg.conf I had the line
Option "XkbLayout" "ziegler"
where "ziegler" is my own keyboard-layout, situated in
/usr/share/X11/xkb/symbols. Maybe this caus
I cannot install console-setup 1.45.
"dpkg --configure console-setup" always hangs after I have entered the
country of origin of my keyboard, no matter what I choose. The
subprocess "/var/lib/dpkg/info/console-setup.config configure" seems
to be in a loop, while "frontend" and "console-setup.c" us
After the last "aptitude update",
"aptitude --show-why full-upgrade" works
again.
Martin
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Version: 2.86.ds1-65"
does not depend on later versions of initscripts, sysv-rc
sysvinit-utils as it should:
"Depends: libc6, libselinux1 (>= 2.0.82), libsepol1 (>= 2.0.36)
PreDepends: initscripts, sysv-rc (>= 2.86.ds1-1.2) | file-rc (> 0.7.0),
sysvinit-utils"
Date: Sat, 18 Jul 2009 21:27:57 -0600 (MDT)
From: Martin Ziegler
Subject: Bug#457896: sysvinit: "Could not get pty for /etc/rc.S/[script]"
You are right: I upgraded sysvinit from unstable, but
initscripts, sysv-rc, sysvinit-utils only from tested.
Sorry for the noise.
initscript
It seems to be only a boot problem:
After "modprobe -r pcspkr; modprobe pcspkr"
the console beeps again.
Regards,
Martin
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
I had the same problem, when I
cut down /etc/uswsusp.conf by hand
to only
resume device = /dev/sda3
shutdown method = shutdown
(for some silly reason.)
dpkg-reconfigure uswsusp solved
the problem.
(Martin Ziegler)
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with
Thanks,
Martin
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
On the console the variable COLUMNS was as 80, as recommended by resize:
$ resize; echo $COLUMNS
COLUMNS=80;
LINES=24;
export COLUMNS LINES;
80
On a full screen xterm window COLUMNS equals 232 and the
output of "LANG=en aptitude -s why libsdl1.2debian-alsa" is
as in the atta
I was hit by the same problem today
after I installed grub-pc 1.96+20080724-14.
My thinkpad did not boot.
Reading the discussion on #497791 I could
finally 'fix it'.
Regards,
Martin
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble
ed error occurred while tokenizing input
The following traceback may be corrupted or invalid
The error message is: ('EOF in multi-line statement', (145,
0))
----
(The traceback followed)
Regards,
(Martin Ziegler)
--
To UNSUBSCRIBE, email to debian-bu
Dear Jonas,
Thanks,
x11 reappeared, after I updated ghostscript-x to
8.63.dfsg.1-2 in unstable. (So the bug can be closed here)
Regards,
Martin
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.or
Hi,
I just downloaded lynx-cur 2.8.7dev9-2. Again
my symbolic link /etc/lynx-cur/local.cfg
points now to an empty file.
Regards,
Martin
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
on_ac_power has stopped working
with kernel 2.6.25.
Regards,
Martin
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
"texi2dvi -l Texinfo" does not work either.
Contrary to man page and help-text
Regards
(Martin Ziegler)
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
The problem vanished after I updated my "xserver-xorg*" Packages.
Here is the output of aptitude -F "%p%V" search ~ixorg
xorg 1:7.2-5
xorg-docs 1:1.4-2
xserver-xorg 1:7.3+2
xserver-xorg-core 2:1.4-2
xserver-xorg-input-kbd1:1.2.2-3
xse
On Sat, 18 Aug 2007, Brice Goglin wrote:
xserver-xorg-video-intel 2:2.1.1-1 is in unstable with a fix for the
above "border" problem. Does it help?
Brice
I had 2:2.1.1-1 already installed for a while:
"apt-show-versions xserver-xorg-video-intel
xserver-xorg-video-intel/unstable uptodate 2:2
The two bugs are not longer reproducible on my system (Debian testing)
#418208 firestarter is not longer affected by the start of
iceweasel
#417741 The list of events can now be updated
Thanks,
Martin
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Troub
: Including configuration from common.conf
Using '/etc/init.d' as init.d directory.
hibernate: Trying method in sysfs-disk.conf...
hibernate: Including configuration from common.conf
Martin Ziegler
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Tro
Hi,
2.6.23-rc2 has the same behaviour.
To set frequencies in multiples of 16 is good enough, but it could break
software which relied on different behaviour until kernel 2.6.18 ( or
on different behaviour on other machines.) So I would consider it as a
bug.
Regards,
Martin
On Sat, 4 Aug 200
I tested adjtimex() more systemtically (on 2.6.22) and found
that only frequencies which are divisible
by 16 can be set. Other numbers are changed to the
next number below (in absolute value) which is divible by 16.
Regards,
Martin
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of
1 - 100 of 125 matches
Mail list logo
