Bug#503896: dh-make: [PATCH] dh_install - order options alphabetically in POD

Package: dh-make Version: 0.46 Severity: wishlist Tags: patch Present options alohabetically in the manual page; the patch adjusts the POD. (Cf. cp, mv commands etc.). -- System Information: Debian Release: lenny/sid APT prefers testing APT policy: (500, 'testing') Architecture: i386 (i686)

Bug#488434: installation-reports: somewhat problematic install on Thecus N2100

Sjoerd, we're still waiting for your input on this. (see below) * Frans Pop <[EMAIL PROTECTED]> [2008-09-16 19:45]: > On Saturday 13 September 2008, Martin Michlmayr wrote: > > * Sjoerd Simons <[EMAIL PROTECTED]> [2008-06-28 22:19]: > > > The big issue was that i couldn't configure a custom mir

Bug#404950: Disk is advertised as partition on SWARM

Thiemo, do you see this bug with 2.6.26? Or, rather, does IDE work at all? I know some new SWARM IDE patches went into 2.6.27, so I've no idea if 2.6.26 works at all. -- Martin Michlmayr http://www.cyrius.com/ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Tr

Bug#487452: installation-report: d-i lenny beta 2 nslu2 armel

* Otavio Salvador <[EMAIL PROTECTED]> [2008-09-13 16:39]: > > In both cases this would of course only solve the problem for devices that > > are connected during installation, not in cases where the user first > > connects the device after the system has been installed. > > For that the quirks wo

Bug#495786: Accepted refpolicy 2:0.0.20080702-8 (source all)

* Martin Michlmayr <[EMAIL PROTECTED]> [2008-10-16 22:11]: > It seems that things have significantly improved: ... > So it takes about 15 minutes now. Kevin, do you have time to do an installation to confirm this? -- Martin Michlmayr http://www.cyrius.com/ -- To UNSUBSCRIBE, email to [EMAIL P

Bug#466977: Bug#404951: sb1-bcm91250a kernel does not boot

* Thiemo Seufer <[EMAIL PROTECTED]> [2008-09-15 14:11]: > I am promised to have internet access again at home next weekend, > working on the SWARM kernels is the highest Debian-related priority > I have at that point. Thiemo, what's the status of this? -- Martin Michlmayr http://www.cyrius.com/

Bug#503871: iceweasel: ~/.mozilla folder has permision drwx------ root root

On Wed, Oct 29, 2008 at 07:29:57AM +0100, Mike Hommey wrote: > On Tue, Oct 28, 2008 at 11:16:23PM +0100, Rafael Belmonte wrote: > > Package: iceweasel > > Version: 3.0.3-2 > > Severity: grave > > Justification: renders package unusable > > > > ~/.mozilla folder has permisions: d rwx --- --- root r

Bug#503871: iceweasel: ~/.mozilla folder has permision drwx------ root root

On Wed, Oct 29, 2008 at 07:33:56AM +0100, Mike Hommey wrote: > On Wed, Oct 29, 2008 at 07:29:57AM +0100, Mike Hommey wrote: > > On Tue, Oct 28, 2008 at 11:16:23PM +0100, Rafael Belmonte wrote: > > > Package: iceweasel > > > Version: 3.0.3-2 > > > Severity: grave > > > Justification: renders package

Bug#503895: (no subject)

Subject: nvidia-glx: packages description includes unsupported video cards Package: nvidia-glx Version: 173.14.09-5 Severity: important -- Package-specific info: uname -r: Linux box 2.6.26-8 #1 Sat Oct 18 02:25:34 IST 2008 i686 GNU/Linux /proc/version: Linux version 2.6.26-8 (2.6.26) ([EMAIL

Bug#503616: RFC: how to push the fix for #503616 (and on the fix itself)

Stefano Zacchiroli wrote: > tags 503616 + patch > thanks > > Dear -release-rs, > > how should I push the fix for #503616? Via t-p-u or unstable + unblock > request? > > Long story: only recently it has been brought to my attention #503616 > which affects an Apache module currently in testing. >

Bug#503871: iceweasel: ~/.mozilla folder has permision drwx------ root root

On Tue, Oct 28, 2008 at 11:16:23PM +0100, Rafael Belmonte wrote: > Package: iceweasel > Version: 3.0.3-2 > Severity: grave > Justification: renders package unusable > > ~/.mozilla folder has permisions: d rwx --- --- root root after first > isntallation. > Its owner and group is root, and only ro

Bug#503894: [www.debian.org] intro/organization French translation error for "Debian Maintainer Keyring Team"

Package: www.debian.org Severity: minor Tags: l10n In http://www.debian.org/intro/organization.fr.html the string "Debian Maintainer Keyring Team" from http://www.debian.org/intro/organization.en.html is translated to "Équipe des responsables des clés Debian", which means "Debian keys maintaine

Bug#488283: software rendering

Sten Heinze wrote: > Am Tuesday 28 October 2008 06:54:05 schrieben Sie: > >> Handle yes, allocate no. Allocating room for a 2048x2048 virtual screen >> requires a lot of available memory. >> > I cannot imagine that it needs more memory that I have. According to [1] on > system with more th

Bug#503664: xserver-xorg-core: Dual head with Radeon HD3200 - heads partly overlay each other

> I'm unable to make work an external monitor with experimental radeon > driver. I tried ModeLine + PreferredMode without luck. I tried the > following from the command line: > [EMAIL PROTECTED]:~$ xrandr --auto > xrandr: cannot find crtc for output VGA-0 > [EMAIL PROTECTED]:~$ xrandr --output VGA

Bug#503884: live-helper: the rescue list contains packages that are not on the repository

tags 503884 +pending thanks Mihai wrote: > My custom list to create an iso image contains the rescue list. This its > inclusion depends on two packages that > are not to be found on the repository: > sl-lmodem-daemon > bcm43xx-fwcutter this has been fixed in git already some time ago. -- Addr

Bug#503893: funguloids: Crashes on startup

Package: funguloids Version: 1.06-7 Severity: important Funguloids crashes on startup for me with the below output. Before running I removed my .funguloids directory. I choose OpenGL rendering, not full screen. Creating resource group General Creating resource group Internal Creating resource

Bug#399175: help with an apt french translation bug report

Le Wed, Oct 29, 2008 at 12:51:44AM -0200, Andre Felipe Machado a écrit : > Hello, > Please, analyze what the correct approach to > http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=399175 Hi all, the bug: | I found bad characters ( é è à ...) in the files: | /usr/share/man/fr/man8/apt-cache.8.

Bug#502140: cannot unlock screen during etch -> lenny transition

or even better: while "$ xscreensaver-command -exit" fails (indicating screensaver active): sleep 5 seconds perform pam and xscreensaver installation restart xscreensaver daemon which eliminates any need for user intervention. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED]

Bug#502140: cannot unlock screen during etch -> lenny transition

the previous suggestion also seems like it would work pretty well. some python-like pseudo code: while "$ xscreensaver-command -exit" fails (indicating screensaver active): present dialog indicating that an active xscreensaver was detected wait for user to unlock screen and respond to di

Bug#503892: on upgrade to lenny, /etc/alternatives/emacs still points to emacs21

Package: emacs Version: 22.2+2-4 Severity: normal I recently upgraded to lenny. Note that initially I got emacs22-nox installed for some reason, but that is a side issue. More importantly, alternatives did not update correctly to emacs22. Isn't this set in the postinst or something? Further info

Bug#502140: cannot unlock screen during etch -> lenny transition

if a sufficiently detailed note about this (and a recommendation to disable the screensaver) is added to the release notes, then i believe that this bug can be closed. btw, where can i review the release notes at? -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". T

Bug#182186: getaddrinfo(3) does not document argument consistency/unambiguity requirements

tags 182186 fixed-upstream thanks Time to revisit another ancient bug report... > On Sat, Aug 23, 2003 at 20:25:52 +0200, Martin Schulze wrote: > > J.H.M. Dassen (Ray) wrote: > > > Our getaddrinfo(3) does not document the consistency requirements (e.g. > > > the need to provide a ai_socktype hin

Bug#493925: hmhm results with Ben's patch for mga drm firmware loading and G550

On Mon, 2008-10-27 at 18:39 +0100, Thomas Viehmann wrote: > Hi, > > thanks, Ben, for looking into firmwares. > On my computer (using a G550), I'm seeing > [ 62.796953] [drm] Initialized card for AGP DMA. > [ 62.859094] firmware: requesting matrox/g400_warp.fw > [ 63.032671] [drm:mga_warp_ins

Bug#407348: locale used by apt as user or root

Package: apt Version: 0.7.14 Hello, I was unable to reproduce the bug here. The system information sent told that there were some kind of locale misconfiguration. Your system still has this problem? Did you try dpkg-reconfigure locales? Regards. Andre Felipe Machado signature.asc Description

Bug#503891: ITP: scim-waitzar

Package: scim-waitzar Version: 1.0.0 This bug is being filed as an ITP request for the scim-waitzar package, which I am also the maintainer and upstream developer for. Paul Wise requested that I list an ITP bug report in my initial changelog; see: http://lists.debian.org/debian-mentors/2008/09/msg

Bug#503862: Missing shared library for R 2.8.0

Eric, On 28 October 2008 at 21:47, Eric Marsden wrote: | Package: python-rpy | Version: 1.0.3-3 | | When I attempt to load rpy into python, I trigger a runtime error: | | , | | % python | | Python 2.5.2 (r252:60911, Sep 29 2008, 21:10:35) | | [GCC 4.3.2] on linux2 | | Type "help", "copyri

Bug#496418: uploaded to testing-proposed-updates

Thijs, On 29 October 2008 at 00:31, Thijs Kinkhorst wrote: | Hi, | | Here's the patch I used for my upload to testing-proposed-updates to address | this bug in lenny aswell. Thanks for doing that, I really appreciate it. May I ask two questionWhat I don't understand is i) why didn't my 2.7.

Bug#464462: gimp: I'm getting this too

Yasir Assam wrote: > I just tried reproducing it with f.xcf and couldn't do it. I did see the > same bug a few weeks ago (when I last used gimp) but perhaps it's been > fixed since then? I doubt it, though you may want to check what day you installed the latest version of gimp. -- To UNSUBSCRI

Bug#488283: software rendering

Am Tuesday 28 October 2008 06:54:05 schrieben Sie: > Handle yes, allocate no. Allocating room for a 2048x2048 virtual screen > requires a lot of available memory. I cannot imagine that it needs more memory that I have. According to [1] on system with more than 256MB of ram (i have more) 64MB shoul

Bug#503890: javahelper: Manifest file needs two spaces at the beginning of lines

Followup-For: Bug #501516 Package: javahelper Version: 0.16 *** Please type your report below this line *** The following code is wrong in dh_manifest: def splitWrite(f, line): words = line.split() i = 0 first = True for w in words: if i+len(w) > 71: f.write("\n ")

Bug#503889: imagemagick: new upstream release

Package: imagemagick Version: 7:6.3.7.9.dfsg1-2+b2 Severity: wishlist It would be great if you could package imagemagick 6.4.5-0 or later in experimental. As upstream for synfig, I need to test some compatibility issues other people have found with the new version. -- bye, pabs http://wiki.debi

Bug#399673: improved synopsis for = and / notations

Package: apt Version: 0.7.16 Tags: patch Hello, Attached, patches for improved versions of command synopsis for install, remove, purge and source. The apt.ent file is one used at #350865. Please, verify them. Regards. Andre Felipe Machado apt.ent.diff.350865.gz Description: GNU Zip compressed

Bug#31396: Do you viist a swim-ming poool? Leran hoow to aovid naail fugnus ifnection!

http://blog.360.yahoo.com/blog-EqKWhfA2aKXFgk4xDhVruTqg Tehre is no palce for hereps in yoour lifee! Voila vous offre 1 Go d’espace pour stocker et partager photos, vidéos, mp3 et autres documents ! http://www.voila.fr/Macle/ -- To UNS

Bug#503888: Typo in makefile; ps does not build.

Package: python-sphinx Version: 0.4.2-1 Severity: normal File: /usr/share/pyshared/sphinx/texinputs/Makefile Tags: patch This is the immediate fix, but really it should use $(addsuffix) as done for ALLPDF and ALLDVI. diff -ud /usr/share/pyshared/sphinx/texinputs/Makefile /tmp/buffer-content-

Bug#443564: Me too

My apologies for the huge delay. Daniel Burrows wrote: > I think it would be ideal if you could stick the output of > aptitude-create-state-bundle somewhere -- or failing that, the contents > of /var/lib/apt and /etc/apt. Then I might be able to reproduce this on > my computer and see what's ha

Bug#503887: Toshiba Portege M100 works fine with fnfxd

Package: fnfxd Version: 0.3-12 Severity: minor Tags: patch Hi! Just wanted to drop a line telling you that fnfxd works fine on my Toshiba Portege M100. --- a/READMEWed Oct 29 02:37:57 2008 +0100 +++ b/READMEWed Oct 29 02:38:13 2008 +0100 @@ -114,6 +114,7 @@ every new Toshiba laptop reall

Bug#492488: Reproduction of the Iceweasel crashes.

Hi all, just for the record, I got the list of the packages currently installed on Michele's system, and tried to set up a similar system on a test partition: 1) I installed a minimal amd64 system on a test partition with the latest Lenny installer. 2) I converted the list he gave me int

Bug#503404: Confirming #503404

tag 503404 + confirmed thanks I see the same exact behavior too: ~ # DISPLAY=:1 gdb awesome GNU gdb 6.8-debian Copyright (C) 2008 Free Software Foundation, Inc. License GPLv3+: GNU GPL version 3 or later This is free software: you are free to change an

Bug#503886: Additional information

Hi all, Firstly, sorry for the mangled bug report, I didn't check it properly before I sent it. Secondly, and more importantly: This only happens when I copy a group of messages, it seems that if I copy a single message, it respects Thunderbird's wishes. Thanks, -- Julian Calaby Email: [EMAI

Bug#503886: courier-imap-ssl: Messages copied to a mailbox using IMAP from Thunderbird are marked as replies

Package: courier-imap-ssl Version: 4.4.0-2 Severity: normal *** /tmp/reportbug-courier-imap-ssl-20081029-25532-iimw-X Subject: courier-imap-ssl: Messages copied to a mailbox using IMAP from Thunderbird are marked as replies Package: courier-imap-ssl Version: 4.4.0-2 Severity: normal When I co

Bug#350865: patches for ftp-archive wrong reference

Package: apt Version: 0.7.16 Tags: patch Hello, Attached, 3 patches for correcting references to apt-ftparchive. Please, verify them. Regards. Andre Felipe Machado apt.ent.diff.350865.gz Description: GNU Zip compressed data apt-secure.8.diff.350865.gz Description: GNU Zip compressed data

Bug#503885: splashy fails to detect framebuffer-mode if used with lilo

Package: splashy Version: 0.3.10-2 Severity: normal Hi! /etc/init.d/splashy tries to detect a valid framebuffer mode by looking in "/proc/cmdline" (to start splashy if not started in initramfs). The problem is that lilo has it's own "vga=" line and therefore "/proc/cmdline" does neither contain

Bug#503884: live-helper: the rescue list contains packages that are not on the repository

Package: live-helper Version: 1.0.1-1 Severity: normal My custom list to create an iso image contains the rescue list. This its inclusion depends on two packages that are not to be found on the repository: sl-lmodem-daemon bcm43xx-fwcutter It fails with an error when trying to build. I'm buildi

Bug#503883: netmaze: problems with -texture option on 64-bit processors

Package: netmaze Version: 0.81+jpg0.82-12.1 Severity: normal Three problems with using the -texture option: 1. It tries to find a bitmap relative to current directory 2. If it finds it, it will crash when you press 1 to start the game (on AMD64, other archs not tested) 3. Non-64-bit code in tex

Bug#503875: [lintian] Lintian does not complain about missing binary-arch or binary-indep target in debian/rules

tag 503875 moreinfo unreproducible thanks Laurent Léonard wrote: > Package: lintian > Version: 2.0.0 > Severity: normal > > --- Please enter the report below this line. --- > Lintian does not complain about missing binary-arch or binary-indep target in Are you sure you are running lintian on th

Bug#474737: Still not working: Etch netboot installer does not detect ide harddisk

I have tried a recent version of netinst and it still is missing the piix module. iso image: http://cdimage.debian.org/debian-cd/4.0_r5/i386/iso-cd/debian-40r5-i386-netinst.iso Markus -- GMX Download-Spiele: Preizsturz! Alle Puzzle-Spiele Deluxe über 60% billiger. http://games.entertainment.

Bug#492745: Confirming Bug/Possible Fix

I see the same problem. '/etc/init.d/fetchmailrc debug-run' does nothing. No error is returned. I'm running Debian testing; fetchmail version 6.3.9~rc2-3. I was able to correct the problem by adding '--shell /bin/sh' to the su command line. Eric -- To UNSUBSCRIBE, email to [EMAIL PROTECTED

Bug#501504: Bug is unreproducible

tag 501504 unreproducible moreinfo thanks I followed the steps given by Stephen on a pair of cleanly installed Lenny machines (both with puppet 0.24.5-2), and there is no problems with certificate signing or retrieval that I can see. I've verified that the openssl package is not installed on eith

Bug#503882: canon nv30 missing from udev.rules

Package: libgphoto2-2 Version: 2.4.1-3 Severity: normal File: /etc/udev/libgphoto2.rules the canon nv30 (pal) is missing from the udev.rules. lsusb: Bus 001 Device 007: ID 04a9:3198 Canon, Inc. HTH -- System Information: Debian Release: lenny/sid APT prefers unstable APT policy: (500, 'uns

Bug#503835: switchsh: should search for command in $PATH

tag 503835 pending thanks Hi, 2008/10/28 Sven Joachim <[EMAIL PROTECTED]>: > Package: switchsh > Version: 0~20070801-2 > Severity: wishlist > Tags: patch > > It would be useful (and consistent with other utilities that call > external programs) if switchsh used execvp() instead of execv(), so > t

Bug#503853: gnupg: Sometimes hangs on truncated binary input

Some additional info: When I say "only hangs sometimes", I mean for particular inputs, not each time I run "gpg --verify". That is, when I generate foo and truncate one byte, the result is sometimes just unparseable, and sometimes results in a hang. I've attached an example that works, but hangs

Bug#503616: RFC: how to push the fix for #503616 (and on the fix itself)

tags 503616 + patch thanks Dear -release-rs, how should I push the fix for #503616? Via t-p-u or unstable + unblock request? Long story: only recently it has been brought to my attention #503616 which affects an Apache module currently in testing. I do have a fix already, but it involves using

Bug#503616: libapache2-mod-ocamlnet: mod_netcgi_apache.so will not load

tags 503616 + pending thanks On Tue, Oct 28, 2008 at 11:43:52PM +0100, Stéphane Glondu wrote: > >I got a bit rusty on the rpath issue [1,2], but I do think that in > >this case it would be acceptable. > I agree, given that: OK, thanks for the feedback. FWIW, I do have the fix now, but it

Bug#79589: Out of Office AutoReply: Универсальная энциклопедия

C 11.07.2008 я не работаю в компании Юнивег Логистика. По всем вопросам просьба обращаться к Марку Аперсу ([EMAIL PROTECTED]) или Паскалю Люйстеру ([EMAIL PROTECTED]) I'm not working at Univeg Logistics company since 11.07.2008 If you have any questions, please contact Marc Apers ([EMAIL PROTECTE

Bug#500358: xserver-xorg-core: xserver-xorg 1.5 has the same problem

Package: xserver-xorg-core Version: 2:1.5.2-1 Followup-For: Bug #500358 I've installed the xserver-xorg 1.5 and mach64 driver from experimental and tested it with: 1) Current lenny's kernel 2) Gaudenz's patched kernel 3) etchnhalf kernel (2.6.24) All the tests have the same negative result. Lo

Bug#499229: Anoter backtrace

Hi, now I managed to crash irssi with the following sequence: /load otr /load xmpp /xmppconnect -ssl @jabber.ccc.de /unload otr Backtrace: #0 0xb7a8d556 in raise () from /lib/libc.so.6 #1 0xb7a8ed78 in abort () from /lib/libc.so.6 #2 0xb7ac7a6d in __libc_message () from /lib/lib

Bug#496418: uploaded to testing-proposed-updates

Hi, Here's the patch I used for my upload to testing-proposed-updates to address this bug in lenny aswell. cheers, Thijs diff -u r-base-2.7.1/debian/changelog r-base-2.7.1/debian/changelog --- r-base-2.7.1/debian/changelog +++ r-base-2.7.1/debian/changelog @@ -1,3 +1,11 @@ +r-base (2.7.1-1+lenn

Bug#503717: kiki-tho-nano-bot: typo in package description

tag 503717 pending thanks On Sat, Oct 25, 2008 at 01:33:02AM +0300, Sami Liedes wrote: > Package: kiki-tho-nano-bot > Version: 1.0.2+dfsg1-1 > Severity: minor > >"Kiki the nano bot is a 3D puzzle game, a mixture of Sokoban and > Kula-World. Your task is to help Kiki, a small robot living

Bug#503880: openssh bug 5.1p1-3: logs flooded with errors

Package: openssh-server Version: 5.1p1-3 Oct 28 18:55:02 p34 sshd[14468]: channel_input_success_failure: 1: unknown Oct 28 18:56:02 p34 sshd[14468]: channel_input_success_failure: 1: unknown Oct 28 18:58:02 p34 sshd[14468]: channel_input_success_failure: 1: unknown Oct 28 19:00:03 p34 sshd[14468]

Bug#503881: rt2860-source: Wireless infinitely disconnects and reconnects

Package: rt2860-source Version: 1.8.0.0-1 Severity: important Hi, I am using the rt2860sta kernel module with my Asus Eee PC. This problem is 100% reproducible with regular Debian kernel 2.6.26-1-686, although I am submitting it from a machine with a Sidux kernel right now. At apparently random

Bug#448208: RFS: amtterm

On Tue, 2008-10-28 at 10:29 +0100, Reinhard Tartler wrote: > Franklin PIAT <[EMAIL PROTECTED]> writes: > > > I assume we'll wait for Michael's patch to make the first upload. > > We just integrated his 2 patches and published the branch. We'll > continue with some testing and then I'll upload it

Bug#503878: fglrx-atieventsd: authatieventsd.sh uses finger without depending on it and is unreliable

Package: fglrx-atieventsd Version: 1:8-7-2 Severity: serious Tags: patch Justification: Policy 3.5 -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 The patched version of the authentication script we ship with the package uses finger, without fglrx-atieventsd depending on it. (Actually, I wrote th

Bug#503879: RFP: python-zanshin -- twisted-style caldav library

Severity: wishlist Package: wnpp Package name: python-zanshin Version : 0.1 Upstream Author : OSAF / Grant Baillie URL : http://chandlerproject.org/Projects/ZanshinProject License : MIT Programming Lang: Python Description : python modules to access caldav serve

Bug#503877: plone3: New upstream version available

Package: plone3 Version: 3.1.3-1 Severity: wishlist -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Plone 3.1.6 is available on plone.org. - -- System Information: Debian Release: lenny/sid APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Kernel: Linux 2.6.26 (SMP

Bug#503876: [gnash] Unable to install gnash because of "unmet dependencies".

Package: gnash Version: 0.8.2.2 Severity: normal Reading package lists... Done Building dependency tree... Done Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not ye

Bug#502646: liferea --mainwindow-state=iconified opens Liferea maximized

Rodrigo Gallardo wrote: > On Sat, Oct 18, 2008 at 10:54:29PM +0200, Emilio Pozuelo Monfort wrote: >> $ liferea --mainwindow-state=iconified >> opens liferea maximized instead of minimized. >> >> hidden and shown work as expected. > > This is some sort of window manager interaction issue. What WM a

Bug#451625: GNU/Ed 1.1 has been released

GNU/Ed 1.1 was released on 20082014, but Debian still ships 0.7. HOW AM I SUPPOSED TO DO MY WORK WITHOUT A RECENT ed VERSION?! ;) See http://ftp.gnu.org/gnu/ed/ for the tarball. — Wouter -- :wq mail [EMAIL PROTECTED]

Bug#503408: #503408: mxallowd: doesn't preserve local changes to /etc/mxallowd.conf

Hi Niko, * [28.10.08 21:43]: > Here we go, this is against -2 in the archive as that's a fixed > point. This is only lightly tested, please double-check :) I double-checked and added db_stop before #DEBCONF# in mxallowd.postinst to avoid hangs on the first start of mxallowd via debconf. I hope th

Bug#503616: libapache2-mod-ocamlnet: mod_netcgi_apache.so will not load

Stefano Zacchiroli wrote: >Alternatively, we can try adding an RPATH to >/usr/lib/apache2/modules/mod_netcgi_apache.so pointing to `ocamlc >-where`. > >I got a bit rusty on the rpath issue [1,2], but I do think that in >this case it would be acceptable. I agree, given that: *

Bug#503874: add files dialog: location textbox unused

Package: audacious Version: 1.5.1-4 When opening the playlist, and clicking on the `+' menu -> Add files... the add files dialog appears. When typing the location inside the text box, directory names are well completed using existing names, but it only allows to change the text displayed, without

Bug#503875: [lintian] Lintian does not complain about missing binary-arch or binary-indep target in debian/rules

Package: lintian Version: 2.0.0 Severity: normal --- Please enter the report below this line. --- Lintian does not complain about missing binary-arch or binary-indep target in debian/rules. But when I upload an archive to mentors.debian.net I get the following 2 Lintian errors : E: kio-ftps sou

Bug#405965: Details

"First of all, is that I'm also not sure KDE supports working without the lo interface up." Works perfectly on my etch, lenny and kubuntu gutsy (all in a desktop pc not connected to the Internet), without problems from more than one year. lo interface is down and i can't ping 127.0.0.1, but wor

Bug#500358: xserver-xorg-core: Patched kernel doesn't help

Package: xserver-xorg-core Version: 2:1.4.2-7 Followup-For: Bug #500358 Indeed, the Gaudenz's kernel helps to get rid of "INVALID MEM ALLOCATION" messages in the log. But the final result is that last lines of log change from: (WW) MACH64: Mach64 in slot 1:2:0 could not be detected! (II) UnloadMo

Bug#503873: [INTL:sv] Swedish strings for libpam-mount debconf

package: libpam-mount severity: wishlist tags: patch l10n Please consider to add this file to translation of debconf. -- brother http://frakalendern.se sv.po Description: Binary data

Bug#503872: python-musicbrainz2: package should not depend on pthon-ctypes

Package: python-musicbrainz2 Version: 0.6 Severity: important As ctypes is now included in python 2.5: http://python.net/crew/theller/ctypes/ why does python-musicbrainz2 depends on python-ctypes ? I do understand that people using python 2.4 (and earlier versions) have to install ctypes too. W

Bug#478717: ruby1.9: FTBFS on hppa: make[1]: *** [all] Segmentation fault

On 28/10/08 at 22:23 +0100, Josselin Mouette wrote: > I thought it was ironic at the moment, but actually this is so true. The > current hppa kernel is not suitable for a stable release, and the kernel > maintainers are not in a position where they can fix it. The sane > conclusion may be therefore

Bug#503828: is a duplicate of Bug#502398

package ufraw severity 503828 wishlist merge 503828 502398 thanks Please check the bug list before reporting a bug to make sure that your bug has not already been reported. Also, please note that new upstream versions are only "wishlist" severity, and not "important". -- To UNSUBSCRIBE, email

Bug#503616: libapache2-mod-ocamlnet: mod_netcgi_apache.so will not load

On Mon, Oct 27, 2008 at 01:44:01PM +0100, Stéphane Glondu wrote: > Dave Benjamin a écrit : > > I installed libapache2-mod-ocamlnet and enabled the module using "a2enmod > > netcgi_apache". Apache 2 no longer starts, printing this message instead: > > Replacing the last line of /etc/apache2/mods-en

Bug#503871: iceweasel: ~/.mozilla folder has permision drwx------ root root

Package: iceweasel Version: 3.0.3-2 Severity: grave Justification: renders package unusable ~/.mozilla folder has permisions: d rwx --- --- root root after first isntallation. Its owner and group is root, and only root has access. Due this, only root can launch iceweasel. Removing .mozilla folder

Bug#488669: sparc X server bug

Gaudenz Steinlin napsal(a): Hi Daniel back in September you exchanged some mails with Riku Voipio about a bug in the X server on SPARC. In order to resolve this bug I need some further information. First of all I'm not really sure if bug in which you participated[1] is really the same as anoth

Bug#440027: synaptic: Bug still non fixed

Package: synaptic Version: 0.62.1 Followup-For: Bug #440027 This problem is still present in version 0.62. I have to disable the option each time I start synaptic. File /root/.aptitude/config is empty and I do not have apt.conf file. -- System Information: Debian Release: lenny/sid APT prefer

Bug#503868: videocut: video capture screenshot series in resulting PNG black (no images)

-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Sven Aluoor schrieb: > Package: videocut > Version: 0.2.0-2 > Severity: grave > Justification: renders package unusable > > I capture screenshots from movie files with videocut. When working in > the program i see all mini images (see screenshot_using

Bug#492882: Patch for the 4.5.0-16.1 NMU of aolserver4

Dear maintainer of aolserver4, On Tuesday, October 21, 2008 I sent you a notice announcing my intent to upload a NMU of your package to fix its pending l10n issues, after an initial notice sent on Thursday, October 16, 2008. You either agreed for this NMU or did not respond to my notices. I wi

Bug#485707: Informations needed

-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 I tested it with now several video formats and it worked as excepted. In the save as dialog have you choosen there as filename ".jpg" instead of the pre-given ".png"? Result here: JPEG image data, JFIF standard 1.01 - -- /* Mit freundlichem Gruß / W

Bug#503869: [INTL:ja] Updated Japanese debconf translation (ja.po)

Package: grub2 Severity: wishlist Tags: l10n patch Dear grub2 maintainers, Here's updated Japanese po-debconf template (ja.po) file. Could you apply it, please? -- Regards, Hideki Yamane henrich @ debian.or.jp/iijmio-mail.jp http://wiki.debian.org/HidekiYamane ja.po Description: Bi

Bug#502760: Is this really in ldapscripts?

> Either way, isn't this a bug in libnss-ldap, not ldapscripts? It also seems to me that the bug is more on the libnss-ldap side (or maybe on the way nscd is configured). the description of libnss-ldap says (http://packages.debian.org/lenny/libnss-ldap): "If used with glibc 2.1's nscd (Name Se

Bug#503836: --with-x=no is insufficient

Neil Williams wrote: > The build needs --disable-x11 because --with-x=no (or --without-x which > is equivalent) does nothing. indeed, i was seeing that too before having left for dinner. now you saved me the time to find the correct flag myself - very kind of you, thanks! ;) > I can cross-build i

Bug#503728: Upgrade report Etch to Lenny (12-10-2008 18:40) on a Compaq Armada M700

> b) Startup has become slow (roughly 33 seconds) because udev renames > the wireless interface named wlan0 to eth1. > > No idea how to fix. I found a fix. It turned out that wmaster0 (not wlan0, that was a typo) was renamed to eth1 by the rules in /etc/udev/rules.d/70-persistent-net.r

Bug#502244: LANGUAGE=se:nb:no:nn:da:sv ?

On Tuesday 28 October 2008, Neil Williams wrote: > I don't do much with D-I so I can only think that something is wrong > with the environment: Problem is that the environment cannot be changed in D-I as the language is selected using a subshell within the environment where D-I runs. This means t

Bug#478717: ruby1.9: FTBFS on hppa: make[1]: *** [all] Segmentation fault

clone 478717 -1 reassign -1 linux-2.6 retitle -1 [hppa] Serious instability issues with NPTL block 478717 by -1 thanks While trying to reproduce the issue at hand, I only managed to make paer (running kernel 2.6.26-1-parisc) deadlock, like what was described with 2.6.18. So, contrary to previous c

Bug#503867: memtest86+ documentation should make it clearer how to use serial console

Package: memtest86+ Version: 2.01-1.1 Severity: minor I'm very happy with the new ability to boot memtest86+ to the serial line with a boot-time option. Unfortunately, after scouring the package, i couldn't find a reference to how to do it. I ended up reading the source and finding that it seems

Bug#503716: query fails for specific package 'gettext'

package: python-btsutils clone 503716 -1 retitle 503716 HTML backend broken by changes on debbugs severity 503716 important retitle -1 Fails if the bug's forwarded field contains non-ASCII chars thanks Em Seg, 2008-10-27 às 20:08 +0100, Andreas Tille escreveu: > Package: python-btsutils > Version:

Bug#501306: update-grub fails silently with wrong device.map

On Tue, Oct 28, 2008 at 09:13:30PM +0100, Raphael Hertzog wrote: > On Tue, 28 Oct 2008, Robert Millan wrote: > > On Tue, Oct 28, 2008 at 10:27:29AM +0100, Raphael Hertzog wrote: > > > > > > I have two concerns with this: > > > - grub-probe can possibly fail in other circumstances and we will displ

Bug#503865: mercurial: hg clone fails when writing to NFS mount

Package: mercurial Version: 1.0.1-5.1 Severity: important hg clone to an NFS mounted filesystem, automounted with options (rw,vers=3,proto=tcp), fails with the following errors: requesting all changes adding changesets adding manifests adding file changes added 126 changesets with 247 changes to

Bug#503864: fails to work without ipython installed due to typo in snimpy/main.py

Package: snimpy Version: 0.2.1-1 Severity: important Tags: patch Hi, if ipython is not installed, snimpy fails with the following backtrace: Traceback (most recent call last): File "/usr/bin/snimpy", line 23, in main.interact() File "/var/lib/python-support/python2.5/snimpy/main.py", li

Bug#502346: virtualbox-ose-modules-* need to be rebuilt

reopen 502539 merge 502539 502346 thanks these bugs should have been merged (502539 was closed without explanation). live well, vagrant -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#503863: iceape-browser: rightclick block images - no corresponding unblock

Package: iceape-browser Version: 1.1.12-1 Severity: minor When viewing a website, there is a rightclick menu option "Block Images from This Server". However, there is no corresponding "Unblock Images from This Server" option in the rightclick context menu. This is because the "Block Images fro

Bug#503862: Missing shared library for R 2.8.0

Package: python-rpy Version: 1.0.3-3 When I attempt to load rpy into python, I trigger a runtime error: , | % python | Python 2.5.2 (r252:60911, Sep 29 2008, 21:10:35) | [GCC 4.3.2] on linux2 | Type "help", "copyright", "credits" or "license" for more information. | >>> from rpy import * |

Bug#503861: echo apple|apertium en-es: Error: Unknown error matching regexp (code -16)

Package: apertium Version: 3.0.7+1-2 Severity: normal Steps to reproduce: 1) echo apple | apertium en-es Expected results 1) apertium translates apple to Spanish Actual results: 1) apertium prints Error: Unknown error matching regexp (code -16) More info: 1) This is debian unstable chroot on x

Bug#502244: LANGUAGE=se:nb:no:nn:da:sv ?

This bug has been around for 2 weeks without comment, I'm just trying to understand what is going on. The mechanism in the title is certainly how fallback is meant to be activated and I can't see anything in the cdebconf C source code that would change that. I don't do much with D-I so I can only

  1   2   3   4   >