RE: [rtl] Programming a FPGA

[Heinicke, Eric]

Title: Programming a FPGA

We are using an Altera part on a home grown board.  Previous to this, any work of this type was done on platforms without an OS and with the device image in an EEprom.   Any information you are willing to share would be most appreciated! Thank You.   Eric O. Heinicke       [EMAIL PROTECTED] BAE SYSTEMS         Voice:631.262.8644                        Fax:  631.262.8657                        One Hazeltine Way, MS 1-78                        Greenlawn, NY 11740-1606   -----Original Message----- From: Tobias Klotz [mailto:[EMAIL PROTECTED]] Sent: Monday, October 09, 2000 18:58 To: Heinicke, Eric Subject: Re: [rtl] Programming a FPGA Which hardware do you use? We used a Constellation Flex Board and implemented a little program to flash the FPGA Board with our Design (.ttf) file after booting. The Protocoll is simple, if you need you can get details or perhaps the program!   tobias ----- Original Message ----- From: Heinicke, Eric To: '[EMAIL PROTECTED]' Sent: Monday, October 09, 2000 3:05 PM Subject: [rtl] Programming a FPGA Does anyone know of any driver code that shows the programming of a FPGA on the target device board, from a file on the system disk? Thank You.   Eric O. Heinicke       [EMAIL PROTECTED] BAE SYSTEMS         Voice:631.262.8644                        Fax:  631.262.8657                        One Hazeltine Way, MS 1-78                        Greenlawn, NY 11740-1606