We will need a bit more information please. RH version, what is the output of "# ifconfig" what are the contents of /etc/modules.conf, oh below I see DEVICE=eth0 I expect that ifcfg-eth1 is DEVICE=eth1, and what type of NIC are you using?
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] Sent: Wednesday, February 27, 2002 7:09 PM To: [EMAIL PROTECTED] Subject: Ethernet help Is there any software out there that I can use to test to see whether or not my ethernet card is actually working? I have a two port card. Both lights work on the card but I can't get either port to work. Both are configured as follows: DEVICE=eth0 ONBOOT=yes BOOTPROTO=static IPADDR=xxx.xxx.xxx.xxx NETMASK=255.255.255.248 GATEWAY= xxx.xxx.xxx.xxx I have stopped and restarted the machine. Both eth0 and eth1 start up as "OK" on startup. Can't ping in, can't ping out. What am I missing? Linda _______________________________________________ Redhat-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/redhat-list _______________________________________________ Redhat-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/redhat-list
