I don't know much about this subject but have picked a bit up since I bought
a CD-writer. Try increasing the size of your fifo (it look like its filled
up) I don't know how to do this at the command line (I use X front ends) but
in my *limited* experience increasing the size of this dramitically made all
the difference to me between coast and toast. The man cdrecord is very
good. Hope this helps. NH.
> From: "kapil sharma" <[EMAIL PROTECTED]>
> Reply-To: [EMAIL PROTECTED]
> Date: Tue, 24 Apr 2001 15:00:42 +0100
> To: <[EMAIL PROTECTED]>
> Subject: cd writer
>
> Hi,
> I am facing the following problem while writing a cd.
>
> cdrecord -v speed=2 dev=1,0,0 -data solaris8.iso
> Cdrecord 1.9 (i686-pc-linux-gnu) Copyright (C) 1995-2000 Jörg Schilling
> TOC Type: 1 = CD-ROM
> scsidev: '1,0,0'
> scsibus: 1 target: 0 lun: 0
> Linux sg driver version: 2.1.38
> Using libscg version 'schily-0.1'
> atapi: 1
> Device type : Removable CD-ROM
> Version: 0
> Response Format: 1
> Vendor_info: 'HP '
> Identifikation: 'CD-Writer+ 7100 '
> Revision: '3.01'
> Device seems to be: Generic mmc CD-RW.
> Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
> Driver flags : SWABAUDIO
> Drive buf size : 786432 = 768 KB
> FIFO size : 4194304 = 4096 KB
> Track 01: data 640 MB
> Total size: 735 MB (72:53.69) = 328027 sectors
> Lout start: 736 MB (72:55/52) = 328027 sectors
>
> Current Secsize: 2048
>
> ATIP start of lead in: -11325 (97:31/00)
> ATIP start of lead out: 336225 (74:45/00)
> Disk type: Long strategy type (Cyanine, AZO or similar)
> Manuf. index: 22
> Manufacturer: Ritek Co.
> Blocks total: 336225 Blocks current: 336225 Blocks remaining: 8198
> RBlocks total: 345460 RBlocks current: 345460 RBlocks remaining: 17433
> Starting to write CD/DVD at speed 2 in write mode for single session.
> Last chance to quit, starting real write in 1 seconds.
> Waiting for reader process to fill input buffer ... input buffer ready.
> Performing OPC...
> Starting new track at sector: 0
> Track 01: 413 of 640 MB written (fifo 100%).cdrecord: Input/output error.
> write_g1: scsi sendcmd: retryable error
> CDB: 2A 00 00 03 3A 96 00 00 1F 00
> status: 0x2 (CHECK CONDITION)
> Sense Bytes: F0 00 06 00 00 00 00 19 00 06 C1 11 29 00 00 00Sense Key: 0x6
> Unit Attention, Segment 0
> Sense Code: 0x29 Qual 0x00 (power on, reset, or bus device reset occurred)
> Fru 0x0
> Sense flags: Blk 0 (valid)
>
> write track data: error after 433369088 bytes
> Sense Bytes: F0 00 00 00 00 00 00 19 00 00 00 0C 00 00 00 00 00 00
> Writing time: 1428.724s
> Fixating...
> cdrecord: Input/output error. close track/session: scsi sendcmd: retryable
> error
> CDB: 5B 00 02 00 00 00 00 00 00 00
> status: 0x2 (CHECK CONDITION)
> Sense Bytes: F0 00 05 00 00 00 00 19 00 00 00 0E 2C 00 00 00
> Sense Key: 0x5 Illegal Request, Segment 0
> Sense Code: 0x2C Qual 0x00 (command sequence error) Fru 0x0
> Sense flags: Blk 0 (valid)
> cmd finished after 0.010s timeout 480s
> Fixating time: 0.722s
> cdrecord: Input/output error. mode select g1: scsi sendcmd: retryable error
> CDB: 55 10 00 00 00 00 00 00 10 00
> status: 0x2 (CHECK CONDITION)
> Sense Bytes: F0 00 05 00 00 00 00 19 00 FF FF CD 24 00 00 00
> Sense Key: 0x5 Illegal Request, Segment 0
> Sense Code: 0x24 Qual 0x00 (invalid field in cdb) Fru 0x0Sense flags: Blk 0
> (valid)
> cmd finished after 0.006s timeout 40s
> cdrecord: fifo had 6890 puts and 6827 gets.
> cdrecord: fifo was 0 times empty and 6818 times full, min fill was 95%.
>
>
> What can be the problem. I have tried 2 cds.
>
> Please help
> kapil
>
>
>
>
> _________________________________________________________
> Do You Yahoo!?
> Get your free @yahoo.com address at http://mail.yahoo.com
>
>
>
> _______________________________________________
> Redhat-list mailing list
> [EMAIL PROTECTED]
> https://listman.redhat.com/mailman/listinfo/redhat-list
_______________________________________________
Redhat-list mailing list
[EMAIL PROTECTED]
https://listman.redhat.com/mailman/listinfo/redhat-list
