Hi,
I am facing the following problem while writing a cd.
cdrecord -v speed=2 dev=1,0,0 -data solaris8.iso
Cdrecord 1.9 (i686-pc-linux-gnu) Copyright (C) 1995-2000 Jörg Schilling
TOC Type: 1 = CD-ROM
scsidev: '1,0,0'
scsibus: 1 target: 0 lun: 0
Linux sg driver version: 2.1.38
Using libscg version 'schily-0.1'
atapi: 1
Device type : Removable CD-ROM
Version: 0
Response Format: 1
Vendor_info: 'HP '
Identifikation: 'CD-Writer+ 7100 '
Revision: '3.01'
Device seems to be: Generic mmc CD-RW.
Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
Driver flags : SWABAUDIO
Drive buf size : 786432 = 768 KB
FIFO size : 4194304 = 4096 KB
Track 01: data 640 MB
Total size: 735 MB (72:53.69) = 328027 sectors
Lout start: 736 MB (72:55/52) = 328027 sectors
Current Secsize: 2048
ATIP start of lead in: -11325 (97:31/00)
ATIP start of lead out: 336225 (74:45/00)
Disk type: Long strategy type (Cyanine, AZO or similar)
Manuf. index: 22
Manufacturer: Ritek Co.
Blocks total: 336225 Blocks current: 336225 Blocks remaining: 8198
RBlocks total: 345460 RBlocks current: 345460 RBlocks remaining: 17433
Starting to write CD/DVD at speed 2 in write mode for single session.
Last chance to quit, starting real write in 1 seconds.
Waiting for reader process to fill input buffer ... input buffer ready.
Performing OPC...
Starting new track at sector: 0
Track 01: 413 of 640 MB written (fifo 100%).cdrecord: Input/output error.
write_g1: scsi sendcmd: retryable error
CDB: 2A 00 00 03 3A 96 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: F0 00 06 00 00 00 00 19 00 06 C1 11 29 00 00 00Sense Key: 0x6
Unit Attention, Segment 0
Sense Code: 0x29 Qual 0x00 (power on, reset, or bus device reset occurred)
Fru 0x0
Sense flags: Blk 0 (valid)
write track data: error after 433369088 bytes
Sense Bytes: F0 00 00 00 00 00 00 19 00 00 00 0C 00 00 00 00 00 00
Writing time: 1428.724s
Fixating...
cdrecord: Input/output error. close track/session: scsi sendcmd: retryable
error
CDB: 5B 00 02 00 00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: F0 00 05 00 00 00 00 19 00 00 00 0E 2C 00 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x2C Qual 0x00 (command sequence error) Fru 0x0
Sense flags: Blk 0 (valid)
cmd finished after 0.010s timeout 480s
Fixating time: 0.722s
cdrecord: Input/output error. mode select g1: scsi sendcmd: retryable error
CDB: 55 10 00 00 00 00 00 00 10 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: F0 00 05 00 00 00 00 19 00 FF FF CD 24 00 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x24 Qual 0x00 (invalid field in cdb) Fru 0x0Sense flags: Blk 0
(valid)
cmd finished after 0.006s timeout 40s
cdrecord: fifo had 6890 puts and 6827 gets.
cdrecord: fifo was 0 times empty and 6818 times full, min fill was 95%.
What can be the problem. I have tried 2 cds.
Please help
kapil
_________________________________________________________
Do You Yahoo!?
Get your free @yahoo.com address at http://mail.yahoo.com
_______________________________________________
Redhat-list mailing list
[EMAIL PROTECTED]
https://listman.redhat.com/mailman/listinfo/redhat-list
