At 4/22/01 12:07 PM -0500, you wrote:
>THen ping each box from itself. For example if the address of box1 is
>192.168.0.10 on box1 ping 192.168.0.10. If it responds correctly at
>least the nic is set up in the os. Do the same on both boxes and try to
>ping one box from another. If all this is jammin and it sound like it
>should be from your post, take a hard look at the cableing. use
>different ports on the hub. Make sure that you did not plug one of the
>boxes into the uplink port. THis has the effect of reversing the input
>and output conductors on that connector and can cause confusion.
Also create a crossover cable, and connect them directly. It should be
clear then whether it's a cable, hub, or computer issue (hopefully).
--
Rodolfo J. Paiz
[EMAIL PROTECTED]
_______________________________________________
Redhat-list mailing list
[EMAIL PROTECTED]
https://listman.redhat.com/mailman/listinfo/redhat-list
