What you are looking for is not possible exactly. The two ranges that
come closes to what you asked for are:
192.168.1.80 subnet
192.168.1.81 first ip address
192.168.1.86 last ip address
255.255.255.248 subnet mask
second choice
192.168.1.88 subnet
192.168.1.89 first ip address
192.168.1.94 last ip address
255.255.255.248 subnet
Both of these give you 6 ip hosts on the subnet. None of them start at
85, which leads me to believe this not exactly what you are looking for.
david
On Tue, 8 Feb 2000, Eric Sisler wrote:
> Michael J. McGillick <[EMAIL PROTECTED]>
>
> >I'm trying to understand how netmasks work. We want to set up a small
> >pool of IP Addresses, and the only thing we can do is specify the network
> >and the netmask. They want the pool to start at 192.168.1.85, and have 5
> >usuable IP Addresses. What do I specify for the netmask, and more
> >importantly, why? I understand about setting up a network range, when the
> >network is specified at 0, but this 80 is throwing off my thinking.
>
> This won't answer your netmask question, but what are you planning on using
> the small pool for? Are you trying to subnet a larger range so that you
> can have them on different sides of a router (or physical network or
> LAN/WAN) or for some other purpose? There used to be a pretty good subnet
> calculator on Cisco's website, but I haven't looked for quite some
> time. You could tell it what class (A, B, or C) of address you had to work
> with and how many subnets or hosts you wanted to create and it would figure
> out the network address, subnet mask, # of networks and # of hosts per
> network for you.
>
> If you just want to set aside a specific pool of addresses within a larger
> range, what about using DHCP?
>
> -Eric
>
>
> Eric Sisler
> Library Computer Technician
> Westminster Public Library
> Westminster, CO, USA
> [EMAIL PROTECTED]
>
> Linux - don't fear the Penguin.
> Want to know what we use Linux for?
> Visit http://gromit.westminster.lib.co.us/linux
>
>
> --
> To unsubscribe: mail [EMAIL PROTECTED] with "unsubscribe"
> as the Subject.
>
>
--
To unsubscribe: mail [EMAIL PROTECTED] with "unsubscribe"
as the Subject.
