Le Monday 07 July 2008 01:02:51, vous avez écrit :
> Le Saturday 05 July 2008 00:19:27, vous avez écrit :
> > Hi all,
> >
> > I try to make to work ftpobex with my Nokia N72. I try with new
> > versions for openobex and ftpobex. It's compile fine but if i try
> > to list compatible USB obex device, my phone isn't found.
> >
> > bash-3.2# obexftp -u
> > Found 0 USB OBEX interfaces
> >
> >
> > Use '-u interface_number' to connect
> > Nothing to do. Use --help for help.
> >
> > My phone is connected :
> > bash-3.2# usbdevs -v
> > Controller /dev/usb0:
> > addr 1: high speed, self powered, config 1, EHCI root hub(0x0000),
> > Intel(0x8086), rev 1.00
> > port 1 powered
> > port 2 powered
> > port 3 powered
> > port 4 powered
> > port 5 powered
> > port 6 powered
> > Controller /dev/usb1:
> > addr 1: high speed, self powered, config 1, EHCI root hub(0x0000),
> > Intel(0x8086), rev 1.00
> > port 1 powered
> > port 2 powered
> > port 3 powered
> > port 4 powered
> > port 5 powered
> > port 6 powered
> > Controller /dev/usb2:
> > addr 1: full speed, self powered, config 1, UHCI root hub(0x0000),
> > Intel(0x8086), rev 1.00
> > port 1 addr 2: full speed, power 100 mA, config 1, Nokia N72(0x04c4),
> > Nokia(0x0421), rev 0.00
> > port 2 powered
> > Controller /dev/usb3:
> > addr 1: full speed, self powered, config 1, UHCI root hub(0x0000),
> > Intel(0x8086), rev 1.00
> > port 1 addr 2: low speed, power 98 mA, config 1, USB Optical
> > Mouse(0x00c3), vendor 0x15ca(0x15ca), rev 5.12
> > port 2 powered
> > Controller /dev/usb4:
> > addr 1: full speed, self powered, config 1, UHCI root hub(0x0000),
> > Intel(0x8086), rev 1.00
> > port 1 powered
> > port 2 powered
> > Controller /dev/usb5:
> > addr 1: full speed, self powered, config 1, UHCI root hub(0x0000),
> > Intel(0x8086), rev 1.00
> > port 1 powered
> > port 2 powered
> >
> > I join my dmesg:
> >
> > OpenBSD 4.4-beta (GENERIC.MP) #1759: Tue Jul 1 20:52:58 MDT 2008
> > [EMAIL PROTECTED]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
> > real mem = 3476131840 (3315MB)
> > avail mem = 3372560384 (3216MB)
> > mainbus0 at root
> > bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xf06e0 (71 entries)
> > bios0: vendor American Megatrends Inc. version "0704" date 10/30/2007
> > bios0: ASUSTeK Computer INC. P5K
> > acpi0 at bios0: rev 2
> > acpi0: tables DSDT FACP APIC MCFG OEMB HPET OSFR
> > acpi0: wakeup devices P0P2(S4) P0P1(S4) UAR1(S4) PS2K(S4) EUSB(S4)
> > USBE(S4) P0P5(S4) P0P6(S4) P0P7(S4) P0P8(S4) P0P9(S4) USB0(S4) USB1(S4)
> > USB2(S4) USB3 (S4) USB4(S4) USB5(S4) USB6(S4) P0P4(S4)
> > acpitimer0 at acpi0: 3579545 Hz, 24 bits
> > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> > cpu0 at mainbus0: apid 0 (boot processor)
> > cpu0: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz, 2405.80 MHz
> > cpu0:
> > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,C
> >FL
> > USH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2
> >,CX 16,xTPR,NXE,LONG cpu0: 4MB 64b/line 16-way L2 cache
> > cpu0: apic clock running at 267MHz
> > cpu1 at mainbus0: apid 1 (application processor)
> > cpu1: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz, 2405.46 MHz
> > cpu1:
> > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,C
> >FL
> > USH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2
> >,CX 16,xTPR,NXE,LONG cpu1: 4MB 64b/line 16-way L2 cache
> > cpu2 at mainbus0: apid 2 (application processor)
> > cpu2: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz, 2405.46 MHz
> > cpu2:
> > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,C
> >FL
> > USH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2
> >,CX 16,xTPR,NXE,LONG cpu2: 4MB 64b/line 16-way L2 cache
> > cpu3 at mainbus0: apid 3 (application processor)
> > cpu3: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz, 2405.46 MHz
> > cpu3:
> > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,C
> >FL
> > USH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2
> >,CX 16,xTPR,NXE,LONG cpu3: 4MB 64b/line 16-way L2 cache
> > ioapic0 at mainbus0 apid 4 pa 0xfec00000, version 20, 24 pins
> > acpihpet0 at acpi0: 14318179 Hz
> > acpiprt0 at acpi0: bus 0 (PCI0)
> > acpiprt1 at acpi0: bus 1 (P0P2)
> > acpiprt2 at acpi0: bus 5 (P0P1)
> > acpiprt3 at acpi0: bus -1 (P0P5)
> > acpiprt4 at acpi0: bus -1 (P0P6)
> > acpiprt5 at acpi0: bus -1 (P0P7)
> > acpiprt6 at acpi0: bus 3 (P0P8)
> > acpiprt7 at acpi0: bus 2 (P0P9)
> > acpiprt8 at acpi0: bus 4 (P0P4)
> > acpicpu0 at acpi0: PSS
> > acpicpu1 at acpi0: PSS
> > acpicpu2 at acpi0: PSS
> > acpicpu3 at acpi0: PSS
> > acpibtn0 at acpi0: PWRB
> > pci0 at mainbus0 bus 0: configuration mode 1
> > pchb0 at pci0 dev 0 function 0 "Intel 82G33 Host" rev 0x02
> > ppb0 at pci0 dev 1 function 0 "Intel 82G33 PCIE" rev 0x02: apic 4 int 16
> > (irq 11)
> > pci1 at ppb0 bus 1
> > vga1 at pci1 dev 0 function 0 vendor "ATI", unknown product 0x9442 rev
> > 0x00 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> > wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> > agp0 at vga1: no integrated graphics
> > azalia0 at pci1 dev 0 function 1 vendor "ATI", unknown product 0xaa30 rev
> > 0x00: apic 4 int 17 (irq 10)
> > azalia0: /usr/src/sys/dev/pci/azalia.c/1348 invalid PCM format:
> > 0x00000000 azalia0: No codecs found
> > uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x02: apic 4 int
> > 16 (irq 11)
> > uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x02: apic 4 int
> > 21 (irq 3)
> > uhci2 at pci0 dev 26 function 2 "Intel 82801I USB" rev 0x02: apic 4 int
> > 18 (irq 5)
> > ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev 0x02: apic 4 int
> > 18 (irq 5)
> > usb0 at ehci0: USB revision 2.0
> > uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
> > azalia1 at pci0 dev 27 function 0 "Intel 82801I HD Audio" rev 0x02: apic
> > 4 int 22 (irq 15)
> > azalia1: codec[s]: Realtek ALC883
> > audio0 at azalia1
> > ppb1 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x02: apic 4 int
> > 17 (irq 10)
> > pci2 at ppb1 bus 4
> > ppb2 at pci0 dev 28 function 4 "Intel 82801I PCIE" rev 0x02: apic 4 int
> > 17 (irq 10)
> > pci3 at ppb2 bus 3
> > jmb0 at pci3 dev 0 function 0 "JMicron JMB363 IDE/SATA" rev 0x03
> > ahci0 at jmb0: apic 4 int 16 (irq 11), AHCI 1.0
> > scsibus0 at ahci0: 32 targets, initiator 32
> > pciide0 at jmb0: DMA, channel 0 wired to native-PCI, channel 1 wired to
> > native-PCI
> > pciide0: using apic 4 int 16 (irq 11) for native-PCI interrupt
> > wd0 at pciide0 channel 0 drive 1: <Maxtor 6Y160P0>
> > wd0: 16-sector PIO, LBA48, 156334MB, 320173056 sectors
> > wd0(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 6
> > pciide0: channel 1 disabled (no drives)
> > ppb3 at pci0 dev 28 function 5 "Intel 82801I PCIE" rev 0x02: apic 4 int
> > 16 (irq 11)
> > pci4 at ppb3 bus 2
> > "Attansic Technology L1" rev 0xb0 at pci4 dev 0 function 0 not configured
> > uhci3 at pci0 dev 29 function 0 "Intel 82801I USB" rev 0x02: apic 4 int
> > 23 (irq 7)
> > uhci4 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x02: apic 4 int
> > 19 (irq 14)
> > uhci5 at pci0 dev 29 function 2 "Intel 82801I USB" rev 0x02: apic 4 int
> > 18 (irq 5)
> > ehci1 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x02: apic 4 int
> > 23 (irq 7)
> > usb1 at ehci1: USB revision 2.0
> > uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
> > ppb4 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0x92
> > pci5 at ppb4 bus 5
> > xl0 at pci5 dev 1 function 0 "3Com 3c905C 100Base-TX" rev 0x74: apic 4
> > int 17 (irq 10), address 00:01:02:da:a4:34
> > bmtphy0 at xl0 phy 24: Broadcom 3C905C internal PHY, rev. 6
> > "VIA VT6306 FireWire" rev 0xc0 at pci5 dev 3 function 0 not configured
> > pcib0 at pci0 dev 31 function 0 "Intel 82801IB LPC" rev 0x02
> > pciide1 at pci0 dev 31 function 2 "Intel 82801I SATA" rev 0x02: DMA,
> > channel 0 configured to native-PCI, channel 1 configured to native-PCI
> > pciide1: using apic 4 int 22 (irq 15) for native-PCI interrupt
> > wd1 at pciide1 channel 1 drive 0: <MAXTOR STM3320820AS>
> > wd1: 16-sector PIO, LBA48, 305245MB, 625142448 sectors
> > wd1(pciide1:1:0): using PIO mode 4, Ultra-DMA mode 5
> > ichiic0 at pci0 dev 31 function 3 "Intel 82801I SMBus" rev 0x02: apic 4
> > int 18 (irq 5)
> > iic0 at ichiic0
> > spdmem0 at iic0 addr 0x50: 2GB DDR2 SDRAM non-parity PC2-6400CL5
> > spdmem1 at iic0 addr 0x52: 2GB DDR2 SDRAM non-parity PC2-6400CL5
> > pciide2 at pci0 dev 31 function 5 "Intel 82801I SATA" rev 0x02: DMA,
> > channel 0 wired to native-PCI, channel 1 wired to native-PCI
> > pciide2: using apic 4 int 22 (irq 15) for native-PCI interrupt
> > usb2 at uhci0: USB revision 1.0
> > uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> > usb3 at uhci1: USB revision 1.0
> > uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> > usb4 at uhci2: USB revision 1.0
> > uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> > usb5 at uhci3: USB revision 1.0
> > uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> > usb6 at uhci4: USB revision 1.0
> > uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> > usb7 at uhci5: USB revision 1.0
> > uhub7 at usb7 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> > isa0 at pcib0
> > isadma0 at isa0
> > com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> > pckbc0 at isa0 port 0x60/5
> > pckbd0 at pckbc0 (kbd slot)
> > pckbc0: using irq 1 for kbd slot
> > wskbd0 at pckbd0: console keyboard, using wsdisplay0
> > pcppi0 at isa0 port 0x61
> > midi0 at pcppi0: <PC speaker>
> > spkr0 at pcppi0
> > wbsio0 at isa0 port 0x2e/2: W83627DHG rev 0x23
> > lm1 at wbsio0 port 0x290/8: W83627DHG
> > fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
> > mtrr: Pentium Pro MTRR support
> > uhidev0 at uhub3 port 1 configuration 1 interface 0 "vendor 0x15ca USB
> > Optical Mouse" rev 2.00/5.12 addr 2
> > uhidev0: iclass 3/1
> > ums0 at uhidev0: 3 buttons, Z dir
> > wsmouse0 at ums0 mux 0
> > softraid0 at root
> > root on wd1a swap on wd1b dump on wd1b
> > umodem0 at uhub2 port 2 configuration 1 interface 8 "Nokia Nokia N72" rev
> > 2.00/0.00 addr 2
> > umodem0: data interface 9, has no CM over data, has break
> > umodem0: status change notification available
> > ucom0 at umodem0
> >
> > And diff for use last obexftp and openobex version.
> > If Anyone has an idea.
> >
> > Thanks,
> > BSDManiak
>
> I have succeeded to make detect my phone. I Have desactivated ucom
> and umodem device. But i have another problem. If i check a first usb
> obex device i havn't nothing indication of the obex device.
>
> bash-3.2# obexftp -u
> OBEX_FindInterfaces():
> OBEX_FreeInterfaces():
> OBEX_FreeInterfaces():
> Found 2 USB OBEX interfaces
>
> 0 (Manufacturer: Product: Serial: (null) Interface description: )
> 1 (Manufacturer: Product: Serial: (null) Interface description: )
>
> Use '-u interface_number' to connect
> Nothing to do. Use --help for help.
>
> The second time obexftp core dump:
>
> bash-3.2# gdb obexftp
> GNU gdb 6.3
> Copyright 2004 Free Software Foundation, Inc.
> GDB is free software, covered by the GNU General Public License, and you
> are welcome to change it and/or distribute copies of it under certain
> conditions. Type "show copying" to see the conditions.
> There is absolutely no warranty for GDB. Type "show warranty" for details.
> This GDB was configured as "amd64-unknown-openbsd4.4"...(no debugging
> symbols found)
>
> (gdb) run -u
> Starting program: /usr/local/bin/obexftp -u
> OBEX_FindInterfaces():
> OBEX_FreeInterfaces():
>
> Program received signal SIGSEGV, Segmentation fault.
> 0x0000000208c4a1ac in usbobex_find_interfaces (interfaces=0x20c2a4d38) at
> usbobex.c:243
> 243 for (i = 0; i <
> dev->config[c].bNumInterfaces; i++) {
>
> and usbdevs says errors :
>
> bash-3.2# usbdevs
> addr 1: EHCI root hub, Intel
> addr 1: EHCI root hub, Intel
> addr 1: UHCI root hub, Intel
> getdevicedesc: ioctl: Input/output error
> getstring: ioctl: Input/output error
> addr 2: product 0x04c4, vendor 0x0421
> addr 1: UHCI root hub, Intel
> addr 2: USB Optical Mouse, vendor 0x15ca
> addr 1: UHCI root hub, Intel
> addr 1: UHCI root hub, Intel
>
> If anyone have any idea.
>
> Thanks,
> BSDManiak
I Have enable USB_DEBUG and then i have this:
bash-3.2# obexftp -u
OBEX_FindInterfaces():
OBEX_FreeInterfaces():
usb_set_debug: Setting debugging level to 5 (on)
usb_os_find_busses: Found /dev/usb0
usb_os_find_busses: Found /dev/usb1
usb_os_find_busses: Found /dev/usb2
usb_os_find_busses: Found /dev/usb3
usb_os_find_busses: Found /dev/usb4
usb_os_find_busses: Found /dev/usb5
usb_os_find_devices: Found /dev/ugen0 on /dev/usb3
usb_control_msg: 128 6 512 0 0x7f7ffffcec98 8 1000
usb_control_msg: 128 6 512 0 0x209bae200 282 1000
skipped 3 class/vendor specific interface descriptors
skipped 3 class/vendor specific interface descriptors
skipped 1 class/vendor specific interface descriptors
skipped 3 class/vendor specific interface descriptors
skipped 3 class/vendor specific interface descriptors
skipped 3 class/vendor specific interface descriptors
skipped 3 class/vendor specific interface descriptors
usb_control_msg: 128 6 768 0 0x7f7ffffcebf0 255 1000
usb_control_msg: 128 6 769 1033 0x7f7ffffcebf0 255 1000
USB error: error sending control message: Input/output error
usb_control_msg: 128 6 768 0 0x7f7ffffcebf0 255 1000
USB error: error sending control message: Input/output error
usb_control_msg: 128 6 768 0 0x7f7ffffcebf0 255 1000
USB error: error sending control message: Input/output error
usb_control_msg: 128 6 768 0 0x7f7ffffcebf0 255 1000
USB error: error sending control message: Input/output error
usb_control_msg: 128 6 768 0 0x7f7ffffcebf0 255 1000
USB error: error sending control message: Input/output error
usb_control_msg: 128 6 768 0 0x7f7ffffcebf0 255 1000
USB error: error sending control message: Input/output error
usb_control_msg: 128 6 768 0 0x7f7ffffcebf0 255 1000
USB error: error sending control message: Input/output error
usb_control_msg: 128 6 768 0 0x7f7ffffcebf0 255 1000
USB error: error sending control message: Input/output error
OBEX_FreeInterfaces():
Found 2 USB OBEX interfaces
0 (Manufacturer: Product: Serial: (null) Interface description: )
1 (Manufacturer: Product: Serial: (null) Interface description: )
Use '-u interface_number' to connect
Nothing to do. Use --help for help.
I Think it's a problem with libusb :/
BSDManiak
