Le Saturday 05 July 2008 00:19:27, vous avez écrit : > Hi all, > > I try to make to work ftpobex with my Nokia N72. I try with new > versions for openobex and ftpobex. It's compile fine but if i try > to list compatible USB obex device, my phone isn't found. > > bash-3.2# obexftp -u > Found 0 USB OBEX interfaces > > > Use '-u interface_number' to connect > Nothing to do. Use --help for help. > > My phone is connected : > bash-3.2# usbdevs -v > Controller /dev/usb0: > addr 1: high speed, self powered, config 1, EHCI root hub(0x0000), > Intel(0x8086), rev 1.00 > port 1 powered > port 2 powered > port 3 powered > port 4 powered > port 5 powered > port 6 powered > Controller /dev/usb1: > addr 1: high speed, self powered, config 1, EHCI root hub(0x0000), > Intel(0x8086), rev 1.00 > port 1 powered > port 2 powered > port 3 powered > port 4 powered > port 5 powered > port 6 powered > Controller /dev/usb2: > addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), > Intel(0x8086), rev 1.00 > port 1 addr 2: full speed, power 100 mA, config 1, Nokia N72(0x04c4), > Nokia(0x0421), rev 0.00 > port 2 powered > Controller /dev/usb3: > addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), > Intel(0x8086), rev 1.00 > port 1 addr 2: low speed, power 98 mA, config 1, USB Optical > Mouse(0x00c3), vendor 0x15ca(0x15ca), rev 5.12 > port 2 powered > Controller /dev/usb4: > addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), > Intel(0x8086), rev 1.00 > port 1 powered > port 2 powered > Controller /dev/usb5: > addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), > Intel(0x8086), rev 1.00 > port 1 powered > port 2 powered > > I join my dmesg: > > OpenBSD 4.4-beta (GENERIC.MP) #1759: Tue Jul 1 20:52:58 MDT 2008 > [EMAIL PROTECTED]:/usr/src/sys/arch/amd64/compile/GENERIC.MP > real mem = 3476131840 (3315MB) > avail mem = 3372560384 (3216MB) > mainbus0 at root > bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xf06e0 (71 entries) > bios0: vendor American Megatrends Inc. version "0704" date 10/30/2007 > bios0: ASUSTeK Computer INC. P5K > acpi0 at bios0: rev 2 > acpi0: tables DSDT FACP APIC MCFG OEMB HPET OSFR > acpi0: wakeup devices P0P2(S4) P0P1(S4) UAR1(S4) PS2K(S4) EUSB(S4) USBE(S4) > P0P5(S4) P0P6(S4) P0P7(S4) P0P8(S4) P0P9(S4) USB0(S4) USB1(S4) USB2(S4) > USB3 (S4) USB4(S4) USB5(S4) USB6(S4) P0P4(S4) > acpitimer0 at acpi0: 3579545 Hz, 24 bits > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > cpu0 at mainbus0: apid 0 (boot processor) > cpu0: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz, 2405.80 MHz > cpu0: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFL >USH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX >16,xTPR,NXE,LONG cpu0: 4MB 64b/line 16-way L2 cache > cpu0: apic clock running at 267MHz > cpu1 at mainbus0: apid 1 (application processor) > cpu1: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz, 2405.46 MHz > cpu1: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFL >USH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX >16,xTPR,NXE,LONG cpu1: 4MB 64b/line 16-way L2 cache > cpu2 at mainbus0: apid 2 (application processor) > cpu2: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz, 2405.46 MHz > cpu2: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFL >USH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX >16,xTPR,NXE,LONG cpu2: 4MB 64b/line 16-way L2 cache > cpu3 at mainbus0: apid 3 (application processor) > cpu3: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz, 2405.46 MHz > cpu3: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFL >USH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX >16,xTPR,NXE,LONG cpu3: 4MB 64b/line 16-way L2 cache > ioapic0 at mainbus0 apid 4 pa 0xfec00000, version 20, 24 pins > acpihpet0 at acpi0: 14318179 Hz > acpiprt0 at acpi0: bus 0 (PCI0) > acpiprt1 at acpi0: bus 1 (P0P2) > acpiprt2 at acpi0: bus 5 (P0P1) > acpiprt3 at acpi0: bus -1 (P0P5) > acpiprt4 at acpi0: bus -1 (P0P6) > acpiprt5 at acpi0: bus -1 (P0P7) > acpiprt6 at acpi0: bus 3 (P0P8) > acpiprt7 at acpi0: bus 2 (P0P9) > acpiprt8 at acpi0: bus 4 (P0P4) > acpicpu0 at acpi0: PSS > acpicpu1 at acpi0: PSS > acpicpu2 at acpi0: PSS > acpicpu3 at acpi0: PSS > acpibtn0 at acpi0: PWRB > pci0 at mainbus0 bus 0: configuration mode 1 > pchb0 at pci0 dev 0 function 0 "Intel 82G33 Host" rev 0x02 > ppb0 at pci0 dev 1 function 0 "Intel 82G33 PCIE" rev 0x02: apic 4 int 16 > (irq 11) > pci1 at ppb0 bus 1 > vga1 at pci1 dev 0 function 0 vendor "ATI", unknown product 0x9442 rev 0x00 > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) > wsdisplay0: screen 1-5 added (80x25, vt100 emulation) > agp0 at vga1: no integrated graphics > azalia0 at pci1 dev 0 function 1 vendor "ATI", unknown product 0xaa30 rev > 0x00: apic 4 int 17 (irq 10) > azalia0: /usr/src/sys/dev/pci/azalia.c/1348 invalid PCM format: 0x00000000 > azalia0: No codecs found > uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x02: apic 4 int 16 > (irq 11) > uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x02: apic 4 int 21 > (irq 3) > uhci2 at pci0 dev 26 function 2 "Intel 82801I USB" rev 0x02: apic 4 int 18 > (irq 5) > ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev 0x02: apic 4 int 18 > (irq 5) > usb0 at ehci0: USB revision 2.0 > uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 > azalia1 at pci0 dev 27 function 0 "Intel 82801I HD Audio" rev 0x02: apic 4 > int 22 (irq 15) > azalia1: codec[s]: Realtek ALC883 > audio0 at azalia1 > ppb1 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x02: apic 4 int 17 > (irq 10) > pci2 at ppb1 bus 4 > ppb2 at pci0 dev 28 function 4 "Intel 82801I PCIE" rev 0x02: apic 4 int 17 > (irq 10) > pci3 at ppb2 bus 3 > jmb0 at pci3 dev 0 function 0 "JMicron JMB363 IDE/SATA" rev 0x03 > ahci0 at jmb0: apic 4 int 16 (irq 11), AHCI 1.0 > scsibus0 at ahci0: 32 targets, initiator 32 > pciide0 at jmb0: DMA, channel 0 wired to native-PCI, channel 1 wired to > native-PCI > pciide0: using apic 4 int 16 (irq 11) for native-PCI interrupt > wd0 at pciide0 channel 0 drive 1: <Maxtor 6Y160P0> > wd0: 16-sector PIO, LBA48, 156334MB, 320173056 sectors > wd0(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 6 > pciide0: channel 1 disabled (no drives) > ppb3 at pci0 dev 28 function 5 "Intel 82801I PCIE" rev 0x02: apic 4 int 16 > (irq 11) > pci4 at ppb3 bus 2 > "Attansic Technology L1" rev 0xb0 at pci4 dev 0 function 0 not configured > uhci3 at pci0 dev 29 function 0 "Intel 82801I USB" rev 0x02: apic 4 int 23 > (irq 7) > uhci4 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x02: apic 4 int 19 > (irq 14) > uhci5 at pci0 dev 29 function 2 "Intel 82801I USB" rev 0x02: apic 4 int 18 > (irq 5) > ehci1 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x02: apic 4 int 23 > (irq 7) > usb1 at ehci1: USB revision 2.0 > uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1 > ppb4 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0x92 > pci5 at ppb4 bus 5 > xl0 at pci5 dev 1 function 0 "3Com 3c905C 100Base-TX" rev 0x74: apic 4 int > 17 (irq 10), address 00:01:02:da:a4:34 > bmtphy0 at xl0 phy 24: Broadcom 3C905C internal PHY, rev. 6 > "VIA VT6306 FireWire" rev 0xc0 at pci5 dev 3 function 0 not configured > pcib0 at pci0 dev 31 function 0 "Intel 82801IB LPC" rev 0x02 > pciide1 at pci0 dev 31 function 2 "Intel 82801I SATA" rev 0x02: DMA, > channel 0 configured to native-PCI, channel 1 configured to native-PCI > pciide1: using apic 4 int 22 (irq 15) for native-PCI interrupt > wd1 at pciide1 channel 1 drive 0: <MAXTOR STM3320820AS> > wd1: 16-sector PIO, LBA48, 305245MB, 625142448 sectors > wd1(pciide1:1:0): using PIO mode 4, Ultra-DMA mode 5 > ichiic0 at pci0 dev 31 function 3 "Intel 82801I SMBus" rev 0x02: apic 4 int > 18 (irq 5) > iic0 at ichiic0 > spdmem0 at iic0 addr 0x50: 2GB DDR2 SDRAM non-parity PC2-6400CL5 > spdmem1 at iic0 addr 0x52: 2GB DDR2 SDRAM non-parity PC2-6400CL5 > pciide2 at pci0 dev 31 function 5 "Intel 82801I SATA" rev 0x02: DMA, > channel 0 wired to native-PCI, channel 1 wired to native-PCI > pciide2: using apic 4 int 22 (irq 15) for native-PCI interrupt > usb2 at uhci0: USB revision 1.0 > uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > usb3 at uhci1: USB revision 1.0 > uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > usb4 at uhci2: USB revision 1.0 > uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > usb5 at uhci3: USB revision 1.0 > uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > usb6 at uhci4: USB revision 1.0 > uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > usb7 at uhci5: USB revision 1.0 > uhub7 at usb7 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > isa0 at pcib0 > isadma0 at isa0 > com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo > pckbc0 at isa0 port 0x60/5 > pckbd0 at pckbc0 (kbd slot) > pckbc0: using irq 1 for kbd slot > wskbd0 at pckbd0: console keyboard, using wsdisplay0 > pcppi0 at isa0 port 0x61 > midi0 at pcppi0: <PC speaker> > spkr0 at pcppi0 > wbsio0 at isa0 port 0x2e/2: W83627DHG rev 0x23 > lm1 at wbsio0 port 0x290/8: W83627DHG > fdc0 at isa0 port 0x3f0/6 irq 6 drq 2 > mtrr: Pentium Pro MTRR support > uhidev0 at uhub3 port 1 configuration 1 interface 0 "vendor 0x15ca USB > Optical Mouse" rev 2.00/5.12 addr 2 > uhidev0: iclass 3/1 > ums0 at uhidev0: 3 buttons, Z dir > wsmouse0 at ums0 mux 0 > softraid0 at root > root on wd1a swap on wd1b dump on wd1b > umodem0 at uhub2 port 2 configuration 1 interface 8 "Nokia Nokia N72" rev > 2.00/0.00 addr 2 > umodem0: data interface 9, has no CM over data, has break > umodem0: status change notification available > ucom0 at umodem0 > > And diff for use last obexftp and openobex version. > If Anyone has an idea. > > Thanks, > BSDManiak
I have reading libusb code. It's normal that my phone isn't detected by ftpobex. I have desactivated ucom and umodem device in the kernel and then my phone it's detected by ftpobex. It's not working for the moment but i work above.
