Le Saturday 05 July 2008 00:19:27, vous avez écrit :
> Hi all,
>
> I try to make to work ftpobex with my Nokia N72. I try with new
> versions for openobex and ftpobex. It's compile fine but if i try
> to list compatible USB obex device, my phone isn't found.
>
> bash-3.2# obexftp -u
> Found 0 USB OBEX interfaces
>
>
> Use '-u interface_number' to connect
> Nothing to do. Use --help for help.
>
> My phone is connected :
> bash-3.2# usbdevs -v
> Controller /dev/usb0:
> addr 1: high speed, self powered, config 1, EHCI root hub(0x0000),
> Intel(0x8086), rev 1.00
> port 1 powered
> port 2 powered
> port 3 powered
> port 4 powered
> port 5 powered
> port 6 powered
> Controller /dev/usb1:
> addr 1: high speed, self powered, config 1, EHCI root hub(0x0000),
> Intel(0x8086), rev 1.00
> port 1 powered
> port 2 powered
> port 3 powered
> port 4 powered
> port 5 powered
> port 6 powered
> Controller /dev/usb2:
> addr 1: full speed, self powered, config 1, UHCI root hub(0x0000),
> Intel(0x8086), rev 1.00
> port 1 addr 2: full speed, power 100 mA, config 1, Nokia N72(0x04c4),
> Nokia(0x0421), rev 0.00
> port 2 powered
> Controller /dev/usb3:
> addr 1: full speed, self powered, config 1, UHCI root hub(0x0000),
> Intel(0x8086), rev 1.00
> port 1 addr 2: low speed, power 98 mA, config 1, USB Optical
> Mouse(0x00c3), vendor 0x15ca(0x15ca), rev 5.12
> port 2 powered
> Controller /dev/usb4:
> addr 1: full speed, self powered, config 1, UHCI root hub(0x0000),
> Intel(0x8086), rev 1.00
> port 1 powered
> port 2 powered
> Controller /dev/usb5:
> addr 1: full speed, self powered, config 1, UHCI root hub(0x0000),
> Intel(0x8086), rev 1.00
> port 1 powered
> port 2 powered
>
> I join my dmesg:
>
> OpenBSD 4.4-beta (GENERIC.MP) #1759: Tue Jul 1 20:52:58 MDT 2008
> [EMAIL PROTECTED]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
> real mem = 3476131840 (3315MB)
> avail mem = 3372560384 (3216MB)
> mainbus0 at root
> bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xf06e0 (71 entries)
> bios0: vendor American Megatrends Inc. version "0704" date 10/30/2007
> bios0: ASUSTeK Computer INC. P5K
> acpi0 at bios0: rev 2
> acpi0: tables DSDT FACP APIC MCFG OEMB HPET OSFR
> acpi0: wakeup devices P0P2(S4) P0P1(S4) UAR1(S4) PS2K(S4) EUSB(S4) USBE(S4)
> P0P5(S4) P0P6(S4) P0P7(S4) P0P8(S4) P0P9(S4) USB0(S4) USB1(S4) USB2(S4)
> USB3 (S4) USB4(S4) USB5(S4) USB6(S4) P0P4(S4)
> acpitimer0 at acpi0: 3579545 Hz, 24 bits
> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> cpu0 at mainbus0: apid 0 (boot processor)
> cpu0: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz, 2405.80 MHz
> cpu0:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFL
>USH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX
>16,xTPR,NXE,LONG cpu0: 4MB 64b/line 16-way L2 cache
> cpu0: apic clock running at 267MHz
> cpu1 at mainbus0: apid 1 (application processor)
> cpu1: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz, 2405.46 MHz
> cpu1:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFL
>USH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX
>16,xTPR,NXE,LONG cpu1: 4MB 64b/line 16-way L2 cache
> cpu2 at mainbus0: apid 2 (application processor)
> cpu2: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz, 2405.46 MHz
> cpu2:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFL
>USH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX
>16,xTPR,NXE,LONG cpu2: 4MB 64b/line 16-way L2 cache
> cpu3 at mainbus0: apid 3 (application processor)
> cpu3: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz, 2405.46 MHz
> cpu3:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFL
>USH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX
>16,xTPR,NXE,LONG cpu3: 4MB 64b/line 16-way L2 cache
> ioapic0 at mainbus0 apid 4 pa 0xfec00000, version 20, 24 pins
> acpihpet0 at acpi0: 14318179 Hz
> acpiprt0 at acpi0: bus 0 (PCI0)
> acpiprt1 at acpi0: bus 1 (P0P2)
> acpiprt2 at acpi0: bus 5 (P0P1)
> acpiprt3 at acpi0: bus -1 (P0P5)
> acpiprt4 at acpi0: bus -1 (P0P6)
> acpiprt5 at acpi0: bus -1 (P0P7)
> acpiprt6 at acpi0: bus 3 (P0P8)
> acpiprt7 at acpi0: bus 2 (P0P9)
> acpiprt8 at acpi0: bus 4 (P0P4)
> acpicpu0 at acpi0: PSS
> acpicpu1 at acpi0: PSS
> acpicpu2 at acpi0: PSS
> acpicpu3 at acpi0: PSS
> acpibtn0 at acpi0: PWRB
> pci0 at mainbus0 bus 0: configuration mode 1
> pchb0 at pci0 dev 0 function 0 "Intel 82G33 Host" rev 0x02
> ppb0 at pci0 dev 1 function 0 "Intel 82G33 PCIE" rev 0x02: apic 4 int 16
> (irq 11)
> pci1 at ppb0 bus 1
> vga1 at pci1 dev 0 function 0 vendor "ATI", unknown product 0x9442 rev 0x00
> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> agp0 at vga1: no integrated graphics
> azalia0 at pci1 dev 0 function 1 vendor "ATI", unknown product 0xaa30 rev
> 0x00: apic 4 int 17 (irq 10)
> azalia0: /usr/src/sys/dev/pci/azalia.c/1348 invalid PCM format: 0x00000000
> azalia0: No codecs found
> uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x02: apic 4 int 16
> (irq 11)
> uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x02: apic 4 int 21
> (irq 3)
> uhci2 at pci0 dev 26 function 2 "Intel 82801I USB" rev 0x02: apic 4 int 18
> (irq 5)
> ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev 0x02: apic 4 int 18
> (irq 5)
> usb0 at ehci0: USB revision 2.0
> uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
> azalia1 at pci0 dev 27 function 0 "Intel 82801I HD Audio" rev 0x02: apic 4
> int 22 (irq 15)
> azalia1: codec[s]: Realtek ALC883
> audio0 at azalia1
> ppb1 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x02: apic 4 int 17
> (irq 10)
> pci2 at ppb1 bus 4
> ppb2 at pci0 dev 28 function 4 "Intel 82801I PCIE" rev 0x02: apic 4 int 17
> (irq 10)
> pci3 at ppb2 bus 3
> jmb0 at pci3 dev 0 function 0 "JMicron JMB363 IDE/SATA" rev 0x03
> ahci0 at jmb0: apic 4 int 16 (irq 11), AHCI 1.0
> scsibus0 at ahci0: 32 targets, initiator 32
> pciide0 at jmb0: DMA, channel 0 wired to native-PCI, channel 1 wired to
> native-PCI
> pciide0: using apic 4 int 16 (irq 11) for native-PCI interrupt
> wd0 at pciide0 channel 0 drive 1: <Maxtor 6Y160P0>
> wd0: 16-sector PIO, LBA48, 156334MB, 320173056 sectors
> wd0(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 6
> pciide0: channel 1 disabled (no drives)
> ppb3 at pci0 dev 28 function 5 "Intel 82801I PCIE" rev 0x02: apic 4 int 16
> (irq 11)
> pci4 at ppb3 bus 2
> "Attansic Technology L1" rev 0xb0 at pci4 dev 0 function 0 not configured
> uhci3 at pci0 dev 29 function 0 "Intel 82801I USB" rev 0x02: apic 4 int 23
> (irq 7)
> uhci4 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x02: apic 4 int 19
> (irq 14)
> uhci5 at pci0 dev 29 function 2 "Intel 82801I USB" rev 0x02: apic 4 int 18
> (irq 5)
> ehci1 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x02: apic 4 int 23
> (irq 7)
> usb1 at ehci1: USB revision 2.0
> uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
> ppb4 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0x92
> pci5 at ppb4 bus 5
> xl0 at pci5 dev 1 function 0 "3Com 3c905C 100Base-TX" rev 0x74: apic 4 int
> 17 (irq 10), address 00:01:02:da:a4:34
> bmtphy0 at xl0 phy 24: Broadcom 3C905C internal PHY, rev. 6
> "VIA VT6306 FireWire" rev 0xc0 at pci5 dev 3 function 0 not configured
> pcib0 at pci0 dev 31 function 0 "Intel 82801IB LPC" rev 0x02
> pciide1 at pci0 dev 31 function 2 "Intel 82801I SATA" rev 0x02: DMA,
> channel 0 configured to native-PCI, channel 1 configured to native-PCI
> pciide1: using apic 4 int 22 (irq 15) for native-PCI interrupt
> wd1 at pciide1 channel 1 drive 0: <MAXTOR STM3320820AS>
> wd1: 16-sector PIO, LBA48, 305245MB, 625142448 sectors
> wd1(pciide1:1:0): using PIO mode 4, Ultra-DMA mode 5
> ichiic0 at pci0 dev 31 function 3 "Intel 82801I SMBus" rev 0x02: apic 4 int
> 18 (irq 5)
> iic0 at ichiic0
> spdmem0 at iic0 addr 0x50: 2GB DDR2 SDRAM non-parity PC2-6400CL5
> spdmem1 at iic0 addr 0x52: 2GB DDR2 SDRAM non-parity PC2-6400CL5
> pciide2 at pci0 dev 31 function 5 "Intel 82801I SATA" rev 0x02: DMA,
> channel 0 wired to native-PCI, channel 1 wired to native-PCI
> pciide2: using apic 4 int 22 (irq 15) for native-PCI interrupt
> usb2 at uhci0: USB revision 1.0
> uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb3 at uhci1: USB revision 1.0
> uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb4 at uhci2: USB revision 1.0
> uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb5 at uhci3: USB revision 1.0
> uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb6 at uhci4: USB revision 1.0
> uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb7 at uhci5: USB revision 1.0
> uhub7 at usb7 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> isa0 at pcib0
> isadma0 at isa0
> com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pcppi0 at isa0 port 0x61
> midi0 at pcppi0: <PC speaker>
> spkr0 at pcppi0
> wbsio0 at isa0 port 0x2e/2: W83627DHG rev 0x23
> lm1 at wbsio0 port 0x290/8: W83627DHG
> fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
> mtrr: Pentium Pro MTRR support
> uhidev0 at uhub3 port 1 configuration 1 interface 0 "vendor 0x15ca USB
> Optical Mouse" rev 2.00/5.12 addr 2
> uhidev0: iclass 3/1
> ums0 at uhidev0: 3 buttons, Z dir
> wsmouse0 at ums0 mux 0
> softraid0 at root
> root on wd1a swap on wd1b dump on wd1b
> umodem0 at uhub2 port 2 configuration 1 interface 8 "Nokia Nokia N72" rev
> 2.00/0.00 addr 2
> umodem0: data interface 9, has no CM over data, has break
> umodem0: status change notification available
> ucom0 at umodem0
>
> And diff for use last obexftp and openobex version.
> If Anyone has an idea.
>
> Thanks,
> BSDManiak
I have succeeded to make detect my phone. I Have desactivated ucom
and umodem device. But i have another problem. If i check a first usb
obex device i havn't nothing indication of the obex device.
bash-3.2# obexftp -u
OBEX_FindInterfaces():
OBEX_FreeInterfaces():
OBEX_FreeInterfaces():
Found 2 USB OBEX interfaces
0 (Manufacturer: Product: Serial: (null) Interface description: )
1 (Manufacturer: Product: Serial: (null) Interface description: )
Use '-u interface_number' to connect
Nothing to do. Use --help for help.
The second time obexftp core dump:
bash-3.2# gdb obexftp
GNU gdb 6.3
Copyright 2004 Free Software Foundation, Inc.
GDB is free software, covered by the GNU General Public License, and you are
welcome to change it and/or distribute copies of it under certain conditions.
Type "show copying" to see the conditions.
There is absolutely no warranty for GDB. Type "show warranty" for details.
This GDB was configured as "amd64-unknown-openbsd4.4"...(no debugging symbols
found)
(gdb) run -u
Starting program: /usr/local/bin/obexftp -u
OBEX_FindInterfaces():
OBEX_FreeInterfaces():
Program received signal SIGSEGV, Segmentation fault.
0x0000000208c4a1ac in usbobex_find_interfaces (interfaces=0x20c2a4d38) at
usbobex.c:243
243 for (i = 0; i <
dev->config[c].bNumInterfaces; i++) {
and usbdevs says errors :
bash-3.2# usbdevs
addr 1: EHCI root hub, Intel
addr 1: EHCI root hub, Intel
addr 1: UHCI root hub, Intel
getdevicedesc: ioctl: Input/output error
getstring: ioctl: Input/output error
addr 2: product 0x04c4, vendor 0x0421
addr 1: UHCI root hub, Intel
addr 2: USB Optical Mouse, vendor 0x15ca
addr 1: UHCI root hub, Intel
addr 1: UHCI root hub, Intel
If anyone have any idea.
Thanks,
BSDManiak
