Does PF receives DHCP ACK from the production DHCP server ? Did you install the DHCP sensor ?
https://www.packetfence.org/doc/PacketFence_Installation_Guide.html#_microsoft_dhcp_sensor <https://www.packetfence.org/doc/PacketFence_Installation_Guide.html#_microsoft_dhcp_sensor> Thanks, Ludovic Zammit [email protected] <mailto:[email protected]> :: +1.514.447.4918 (x145) :: www.inverse.ca <https://www.inverse.ca/> Inverse inc. :: Leaders behind SOGo (http://www.sogo.nu <http://www.sogo.nu/>) and PacketFence (http://packetfence.org <http://packetfence.org/>) > On Feb 26, 2021, at 11:44 AM, NITISH AGGARWAL <[email protected]> wrote: > > As such there is no restriction on when to check for provisioning although I > have selected option of checking after registration of device. > > On Fri, Feb 26, 2021, 22:11 Ludovic Zammit <[email protected] > <mailto:[email protected]>> wrote: > Provisioner workflow are triggered by DHCP traffic seen from the Production > or Registration networks. > > When do you want to check if Symantec is installed ? > > Thanks, > > Ludovic Zammit > [email protected] <mailto:[email protected]> :: +1.514.447.4918 (x145) :: > www.inverse.ca <https://www.inverse.ca/> > Inverse inc. :: Leaders behind SOGo (http://www.sogo.nu > <http://www.sogo.nu/>) and PacketFence (http://packetfence.org > <http://packetfence.org/>) > > > > > > > >> On Feb 26, 2021, at 11:40 AM, NITISH AGGARWAL <[email protected] >> <mailto:[email protected]>> wrote: >> >> Yes....as I connects the device it went into registration vlan and then if >> it is in domain it gets authenticated and vlan changes as per switch. >> >> Dot1x is working fine...but problem is with Symantec. How to check if end >> device has Symantec client installed and working. >> >> On Fri, Feb 26, 2021, 22:07 Ludovic Zammit <[email protected] >> <mailto:[email protected]>> wrote: >> Hello, >> >> Your devices that connect on PF are statically IP addressed? >> >> Thanks, >> >> Ludovic Zammit >> [email protected] <mailto:[email protected]> :: +1.514.447.4918 (x145) :: >> www.inverse.ca <https://www.inverse.ca/> >> Inverse inc. :: Leaders behind SOGo (http://www.sogo.nu >> <http://www.sogo.nu/>) and PacketFence (http://packetfence.org >> <http://packetfence.org/>) >> >> >> >> >> >> >> >>> On Feb 25, 2021, at 9:55 AM, NITISH AGGARWAL via PacketFence-users >>> <[email protected] >>> <mailto:[email protected]>> wrote: >>> >>> Hi, >>> >>> I have setup PacketFence zen as per guide. I can see dot1x authentication >>> working with MSCHAPv2 auth, so non domain users are not getting access, >>> which is required. I am using auto-registration in connection profile. >>> >>> Second, I have to check for Symantec in my endpoints. I have setup SEPM >>> provisioning as per document. During authentication, I can see security >>> event generated for provisioning on my node in PacketFence but my end >>> device got access to intranet no matter symantec installed on it or not. >>> >>> I have tried everything I could. I need some help in this case. I am using >>> static ips and cisco 2960. >>> >>> I need devices to be registered if they have both domain connected and SEPM >>> installed. >>> >>> Any help will be appreciated. Thanks in advance... >>> >>> >>> _______________________________________________ >>> PacketFence-users mailing list >>> [email protected] >>> <mailto:[email protected]> >>> https://lists.sourceforge.net/lists/listinfo/packetfence-users >>> <https://lists.sourceforge.net/lists/listinfo/packetfence-users> >> >
_______________________________________________ PacketFence-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/packetfence-users
