I think David's on to something. I also edited
/etc/udev/rules.d/62-nut-usbups.rules
# Liebert PowerSure PST UPS - usbhid-ups
ATTR{idVendor}=="10af", ATTR{idProduct}=="0002", MODE="664", GROUP="nut"
is probably the the line I added
On 12/11/2020 4:13 PM, David Zomaya wrote:
Can't claim USB device [10af:0002]: could not detach kernel driver from
interface 0: Operation not permitted
Driver failed to start (exit status=1)
Anything else I can try?
Maybe adding a udev rule like:
# /etc/udev/rules.d/90-nut-ups.rules
ACTION=="add", \
SUBSYSTEM=="usb", \
ATTR{idVendor}=="10af", ATTR{idProduct}=="0002", \
MODE="0660", GROUP="nut"
Be sure to reboot or reload Udev rules after
Credit to AskUbuntu https://askubuntu.com/a/276637 for initially helping me
figure this out.
Thank you,
David Zomaya
Tripp Lite
________________________________
This message is for the addressee's use only. It may contain confidential
information. If you receive this message in error, please delete it and notify
the sender. Tripp Lite disclaims all warranties and liabilities, and assumes no
responsibility for viruses which may infect an email sent to you from Tripp
Lite and which damage your electronic systems or information. It is your
responsibility to maintain virus detection systems to prevent damage to your
electronic systems and information.
--
joe
_______________________________________________
Nut-upsuser mailing list
[email protected]
https://alioth-lists.debian.net/cgi-bin/mailman/listinfo/nut-upsuser
