Hi there. I have a new Liebert Vertiv PSI5 Lithium UPS connected to my Ubuntu 18.04 box via USB that I am trying to configure with NUT. This device is not on the HCL, but should be pretty similar to the PSI 1440 USB which uses the usbhid-ups driver. (or I'm completely wrong, but it's a similar product family...)
I know it's not officially supported, but if someone would like to use me as the guinea pig for the correct driver settings then I'm open to some additional testing. ups.conf entry: [VertivPSI5-lithium] driver = usbhid-ups port = auto "sudo /sbin/upsdrvctl start" outputs the below: Network UPS Tools - UPS driver controller 2.7.4 Network UPS Tools - Generic HID driver 0.41 (2.7.4) USB communication driver 0.33 This Liebert device (10af:0002) is not (or perhaps not yet) supported by usbhid-ups. Please make sure you have an up-to-date version of NUT. If this does not fix the problem, try running the driver with the '-x productid=0002' option. Please report your results to the NUT user's mailing list <[email protected]>. How do I "run the driver with -x ..."? I've tried adding it to the end of the command line and adding it to the ups.conf file, but neither work. I have updated the system via apt. NUT version is: 2.7.4-5.1ubuntu2 Thanks! — Lucas Keipper IT Consultant & Owner LMK Consulting (980) 621-6728 lmkconsulting.net <http://www.lmkconsulting.net>
_______________________________________________ Nut-upsuser mailing list [email protected] https://alioth-lists.debian.net/cgi-bin/mailman/listinfo/nut-upsuser
