[networkups]
driver = usbhid-ups
port = auto
desc = "Network Closet UPS"
productid = 0002
is what's in my ups.conf
On 12/10/2020 2:44 PM, Lucas Keipper wrote:
Hi there. I have a new Liebert Vertiv PSI5 Lithium UPS connected to my
Ubuntu 18.04 box via USB that I am trying to configure with NUT. This
device is not on the HCL, but should be pretty similar to the PSI
1440 USB which uses the usbhid-ups driver. (or I'm completely wrong,
but it's a similar product family...)
I know it's not officially supported, but if someone would like to use
me as the guinea pig for the correct driver settings then I'm open to
some additional testing.
ups.conf entry:
[VertivPSI5-lithium]
driver = usbhid-ups
port = auto
"sudo /sbin/upsdrvctl start" outputs the below:
Network UPS Tools - UPS driver controller 2.7.4
Network UPS Tools - Generic HID driver 0.41 (2.7.4)
USB communication driver 0.33
This Liebert device (10af:0002) is not (or perhaps not yet) supported
by usbhid-ups. Please make sure you have an up-to-date version of NUT. If
this does not fix the problem, try running the driver with the
'-x productid=0002' option. Please report your results to the NUT user's
mailing list <[email protected]
<mailto:[email protected]>>.
How do I "run the driver with -x ..."? I've tried adding it to the end
of the command line and adding it to the ups.conf file, but neither work.
I have updated the system via apt.
NUT version is: 2.7.4-5.1ubuntu2
Thanks!
—
Lucas Keipper
IT Consultant & Owner
LMK Consulting
(980) 621-6728
lmkconsulting.net <http://www.lmkconsulting.net>
_______________________________________________
Nut-upsuser mailing list
[email protected]
https://alioth-lists.debian.net/cgi-bin/mailman/listinfo/nut-upsuser
--
joe
_______________________________________________
Nut-upsuser mailing list
[email protected]
https://alioth-lists.debian.net/cgi-bin/mailman/listinfo/nut-upsuser
