On Thu, Apr 03, 2008 at 04:38:08PM +0000, Nicolas Legrand wrote:
> Reyk Floeter <[EMAIL PROTECTED]> writes:
>
> >
> > i have the same problems on a HP Compaq dc7600 Convertible Minitower.
> > acpi doesn't work. the acpi developers like marco@ are aware of the
> > problem and it is being worked on.
>
> Excellent news! I have the same problem on a dc7700, though I don't
> disable the whole acpi, but acpiprt* on /bsd or acpiprt* and acpimadt0
> on /bsd.mp.
>
it is just a workaround, not a solution. at least it lets the device
in the PCI express slot appear (compare the two dmesgs below). so
thanks for the hint, it is better than disabling acpi at all...
cpu0: 2MB 64b/line 8-way L2 cache
pci0 at mainbus0 bus 0: configuration mode 1
+ppb0 at pci0 dev 1 function 0 "Intel 82945G PCIE" rev 0x02: irq 11
+pci1 at ppb0 bus 1
+thtc0 at pci1 dev 0 function 0 "Tehuti Networks TN3014" rev 0x00: irq 11
+tht0 at thtc0 port 0: address 00:1b:56:18:00:99
+tht1 at thtc0 port 1: address 00:1b:56:18:80:99
reyk
OpenBSD 4.3-current (GENERIC) #1381: Sun Mar 30 18:15:05 MDT 2008
[EMAIL PROTECTED]:/usr/src/sys/arch/amd64/compile/GENERIC
real mem = 527884288 (503MB)
avail mem = 500695040 (477MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xeeb40 (69 entries)
bios0: vendor Hewlett-Packard version "786D1 v01.03" date 05/18/2005
bios0: Hewlett-Packard HP Compaq dc7600 Convertible Minitower
acpi at bios0 not configured
cpu0 at mainbus0: (uniprocessor)
cpu0: Intel(R) Pentium(R) 4 CPU 3.00GHz, 2990.77 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,CNXT-ID,CX16,xTPR,NXE,LONG
cpu0: 2MB 64b/line 8-way L2 cache
pci0 at mainbus0 bus 0: configuration mode 1
pchb0 at pci0 dev 0 function 0 "Intel 82945G Host" rev 0x02
vga1 at pci0 dev 2 function 0 "Intel 82945G Video" rev 0x02
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
agp0 at vga1: aperture at 0xd0000000, size 0x10000000
azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x01: irq 11
azalia0: codec[s]: Realtek ALC260
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x01
pci1 at ppb0 bus 32
ppb1 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x01: irq 10
pci2 at ppb1 bus 63
bge0 at pci2 dev 0 function 0 "Broadcom BCM5752" rev 0x01, BCM5752 A1 (0x6001):
irq 10, address 00:15:60:9d:72:d9
brgphy0 at bge0 phy 1: BCM5752 10/100/1000baseT PHY, rev. 0
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x01: irq 5
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x01: irq 10
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x01: irq 11
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x01: irq 11
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x01: irq 5
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb2 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xe1
pci3 at ppb2 bus 5
pcib0 at pci0 dev 31 function 0 "Intel 82801GB LPC" rev 0x01
pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x01: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
pciide0: channel 0 disabled (no drives)
pciide0: channel 1 disabled (no drives)
pciide1 at pci0 dev 31 function 2 "Intel 82801GB SATA" rev 0x01: DMA, channel 0
configured to native-PCI, channel 1 configured to native-PCI
pciide1: using irq 5 for native-PCI interrupt
wd0 at pciide1 channel 0 drive 0: <ST380819AS>
wd0: 16-sector PIO, LBA48, 76319MB, 156301488 sectors
wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
uhub5 at uhub0 port 1 "Standard Microsystems Hub" rev 2.00/0.01 addr 2
uhidev0 at uhub5 port 1 configuration 1 interface 0 "Logitech USB-PS/2 Optical
Mouse" rev 2.00/27.20 addr 3
uhidev0: iclass 3/1
ums0 at uhidev0: 8 buttons and Z dir.
wsmouse0 at ums0 mux 0
uhidev1 at uhub5 port 2 configuration 1 interface 0 "CHICONY HP Basic USB
Keyboard" rev 1.10/3.00 addr 4
uhidev1: iclass 3/1
ukbd0 at uhidev1: 8 modifier keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
WARNING: / was not properly unmounted
syncing disks...
OpenBSD 4.3-current (GENERIC) #1381: Sun Mar 30 18:15:05 MDT 2008
[EMAIL PROTECTED]:/usr/src/sys/arch/amd64/compile/GENERIC
real mem = 527884288 (503MB)
avail mem = 500695040 (477MB)
User Kernel Config
UKC> disable acpiprt
294 acpiprt* disabled
UKC> quit
Continuing...
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xeeb40 (69 entries)
bios0: vendor Hewlett-Packard version "786D1 v01.03" date 05/18/2005
bios0: Hewlett-Packard HP Compaq dc7600 Convertible Minitower
acpi0 at bios0: rev 0
acpi0: tables DSDT FACP SSDT APIC ASF! MCFG
acpi0: wakeup devices PCI0(S4) PEG1(S4) PCX1(S4) PCX2(S4) PCX5(S4) PCX6(S4)
HUB_(S4) COM1(S4) COM2(S4) USB1(S1) USB2(S1) USB3(S1) USB4(S1) EUSB(S1) PBTN(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpiprt at acpi0 not configured
acpiprt at acpi0 not configured
acpiprt at acpi0 not configured
acpiprt at acpi0 not configured
acpiprt at acpi0 not configured
acpiprt at acpi0 not configured
acpiprt at acpi0 not configured
acpicpu0 at acpi0
acpibtn0 at acpi0: PBTN
cpu0 at mainbus0: (uniprocessor)
cpu0: Intel(R) Pentium(R) 4 CPU 3.00GHz, 2990.82 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,CNXT-ID,CX16,xTPR,NXE,LONG
cpu0: 2MB 64b/line 8-way L2 cache
pci0 at mainbus0 bus 0: configuration mode 1
pchb0 at pci0 dev 0 function 0 "Intel 82945G Host" rev 0x02
ppb0 at pci0 dev 1 function 0 "Intel 82945G PCIE" rev 0x02: irq 11
pci1 at ppb0 bus 1
thtc0 at pci1 dev 0 function 0 "Tehuti Networks TN3014" rev 0x00: irq 11
tht0 at thtc0 port 0: address 00:1b:56:18:00:99
tht1 at thtc0 port 1: address 00:1b:56:18:80:99
vga1 at pci0 dev 2 function 0 "Intel 82945G Video" rev 0x02
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
agp0 at vga1: aperture at 0xd0000000, size 0x10000000
azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x01: irq 11
azalia0: codec[s]: Realtek ALC260
audio0 at azalia0
ppb1 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x01
pci2 at ppb1 bus 32
ppb2 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x01: irq 10
pci3 at ppb2 bus 63
bge0 at pci3 dev 0 function 0 "Broadcom BCM5752" rev 0x01, BCM5752 A1 (0x6001):
irq 10, address 00:15:60:9d:72:d9
brgphy0 at bge0 phy 1: BCM5752 10/100/1000baseT PHY, rev. 0
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x01: irq 5
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x01: irq 10
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x01: irq 11
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x01: irq 11
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x01: irq 5
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb3 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xe1
pci4 at ppb3 bus 5
pcib0 at pci0 dev 31 function 0 "Intel 82801GB LPC" rev 0x01
pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x01: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
pciide0: channel 0 disabled (no drives)
pciide0: channel 1 disabled (no drives)
pciide1 at pci0 dev 31 function 2 "Intel 82801GB SATA" rev 0x01: DMA, channel 0
configured to native-PCI, channel 1 configured to native-PCI
pciide1: using irq 5 for native-PCI interrupt
wd0 at pciide1 channel 0 drive 0: <ST380819AS>
wd0: 16-sector PIO, LBA48, 76319MB, 156301488 sectors
wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
uhub5 at uhub0 port 1 "Standard Microsystems Hub" rev 2.00/0.01 addr 2
uhidev0 at uhub5 port 1 configuration 1 interface 0 "Logitech USB-PS/2 Optical
Mouse" rev 2.00/27.20 addr 3
uhidev0: iclass 3/1
ums0 at uhidev0: 8 buttons and Z dir.
wsmouse0 at ums0 mux 0
uhidev1 at uhub5 port 2 configuration 1 interface 0 "CHICONY HP Basic USB
Keyboard" rev 1.10/3.00 addr 4
uhidev1: iclass 3/1
ukbd0 at uhidev1: 8 modifier keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
