On Thu, Apr 03, 2008 at 01:35:31PM +0300, Denis Doroshenko wrote:
> i have the same issue, which i reported in
> http://marc.info/?l=openbsd-misc&m=119608530213184&w=2
> then i had angry mail from Theo (WRT lack of information), though
> he listed a few of developers who i needed to contact. i did some
> more progres (like backtracing the core from -g compiled acpidump)
> and sent to those developers; there's no news since then.
>
> the problem is there in the -current. i upgraded the bios of the
> notebook (just in case there is something wrong with it), but the
> problem remains. the worst thing is those notebooks have no
> other means to access various hardware stuff (e.g. sensors),
> only via ACPI.
>
> unfortunately i have no spare time whatsoever to read ACPI
> specs, because the assert that fails in acpidump points (as
> far as i understand) that ACPI script's structure causes
> problems to OpenBSD ACPI parser (non-standard things?).
>
i have the same problems on a HP Compaq dc7600 Convertible Minitower.
acpi doesn't work. the acpi developers like marco@ are aware of the
problem and it is being worked on.
---snip---
0xffff80000005c460 cnt:00 stk:61 integer: 0
ffff8b46 Called: \_SB_.PCI0._CRS
local0: 0xffff80000005c420 cnt:00 stk:60 integer: b6
local0: 0xffff80000005c460 cnt:00 stk:61 integer: 0
panic: aml_die aml_setbufint:988
---snap---
in addition to the `boot -c` temporary workaround, you can also
permanently disable acpi in a kernel by running the following command
from the shell:
# config -ef /bsd
OpenBSD 4.3-current (GENERIC) #1381: Sun Mar 30 18:15:05 MDT 2008
[EMAIL PROTECTED]:/usr/src/sys/arch/amd64/compile/GENERIC
Enter 'help' for information
ukc> disable acpi
285 acpi0 disabled
ukc> quit
Saving modified kernel.
> On Thu, Apr 3, 2008 at 12:32 PM, Raimo Niskanen
> <[EMAIL PROTECTED]> wrote:
> > I also have ACPI problems on a HP notebook. Mine is a hp2510p,
> > and it kernel panics during boot. I have reported this to
> > [EMAIL PROTECTED] a few times.
> >
> > For me it has worked to boot and crash,
> > UKC> trace
> > UKC> ps
> > UKC> boot reboot
> > boot with -c,
> > UKC> disable acpi
> > UKC> exit
> > and let it boot without ACPI. And magically, when booted,
> > the dmesg contains both boots; put it on e.g an USB key.
> >
> > acpidump core dumps for mee too. I have sent in the
> > broken results as well as the core file. I do not
> > if someone is trying to solve the problem, though.
> >
> > I have not tried the MP kernel.
> >
> >
> >
> > On Thu, Apr 03, 2008 at 10:59:01AM +0200, Daniele Pilenga wrote:
> > > Hi guys,
> > > I have this notebook on which I'd like to install (and use!) OpenBSD,
> > > but I have a little problem.
> > >
> > > If I leave ACPI anabled, as per default on this Apr 1st snapshot, the
> > > /bsd kernel reboots after cpu probing
> > > (more or less, I don't have any serial so I cannot see very clearly,
> > > it's too fast) and the /bsd.mp kernel hangs at some
> > > acpi probing.
> > >
> > > Enabling verbose mode is not very helpful since it scrolls down too
> > > fast and in both cases rebooting the machine does not
> > > leave the dmesg in memory.
> > >
> > > I already tried disabling some random driver, but since I cannot see
> > > where the problem is I don't even know what to
> > > look for.
> > >
> > > It would not be that bad living without acpi, but the MP kernel cannot
> > > see both cpu cores, so I hope there is something
> > > I could try.
> > >
> > > It seems there is a problem with the audio, but I'll leave that for
> > later. :-)
> > >
> > > Dmesg follows, please let me know if there is something else you need
> > > or if you have any suggestion.
> > > BTW, acpidump core dumps, but may be related to the non-acpi kernel.
> > >
> > > Thank you,
> > > D.
> > >
> > > OpenBSD 4.3-current (GENERIC) #732: Tue Apr 1 00:54:18 MDT 2008
> > >
> > > [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
> > >
> > > cpu0: Genuine Intel(R) CPU T2600 @ 2.16GHz ("GenuineIntel" 686-class)
> > 2.17 GHz
> > >
> > > cpu0:
> > FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,VMX,EST,TM2,xTPR
> > >
> > > real mem = 2146856960 (2047MB)
> > >
> > > avail mem = 2067857408 (1972MB)
> > >
> > > User Kernel Config
> > >
> > > UKC> disable acpi
> > >
> > > 422 acpi0 disabled
> > >
> > > UKC> quit
> > >
> > > Continuing...
> > >
> > > mainbus0 at root
> > >
> > > bios0 at mainbus0: AT/286+ BIOS, date 03/05/08, BIOS32 rev. 0 @
> > > 0xf0000, SMBIOS rev. 2.4 @ 0xf3b77 (23 entries)
> > >
> > > bios0: vendor Hewlett-Packard version "68YAF Ver. F.1C" date 03/05/2008
> > >
> > > bios0: Hewlett-Packard HP Compaq nw9440 (EY314EA#ABZ)
> > >
> > > acpi at bios0 function 0x0 not configured
> > >
> > > pcibios0 at bios0: rev 2.1 @ 0xf0000/0x2000
> > >
> > > pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf07c0/208 (11 entries)
> > >
> > > pcibios0: bad IRQ table checksum
> > >
> > > pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf9990/208 (11 entries)
> > >
> > > pcibios0: PCI Exclusive IRQs: 5 10 11
> > >
> > > pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801FBM LPC" rev
> > 0x00)
> > >
> > > pcibios0: PCI bus #32 is the last bus
> > >
> > > bios0: ROM list: 0xc0000/0xdc00 0xd0000/0x1000 0xd1000/0x1800
> > >
> > > cpu0 at mainbus0
> > >
> > > cpu0: unknown Enhanced SpeedStep CPU, msr 0x06130d2c06000d2c
> > >
> > > cpu0: using only highest and lowest power states
> > >
> > > cpu0: Enhanced SpeedStep 2167 MHz (1404 mV): speeds: 2167, 1000 MHz
> > >
> > > pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
> > >
> > > pchb0 at pci0 dev 0 function 0 "Intel 82945GM Host" rev 0x03
> > >
> > > ppb0 at pci0 dev 1 function 0 "Intel 82945GM PCIE" rev 0x03
> > >
> > > pci1 at ppb0 bus 1
> > >
> > > vga1 at pci1 dev 0 function 0 vendor "NVIDIA", unknown product 0x029b
> > rev 0xa1
> > >
> > > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> > >
> > > wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> > >
> > > agp0 at vga1: no integrated graphics
> > >
> > > azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x01: irq
> > 10
> > >
> > > azalia0: codec[s]: Analog Devices/0x1981, Conexant/0x2bfa, using
> > > Analog Devices/0x1981
> > >
> > > audio0 at azalia0
> > >
> > > ppb1 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x01: irq 10
> > >
> > > pci2 at ppb1 bus 8
> > >
> > > bge0 at pci2 dev 0 function 0 "Broadcom BCM5753M" rev 0x21, BCM5750 C1
> > > (0x4201): irq 10, address 00:16:d4:0c:fc:f0
> > >
> > > brgphy0 at bge0 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
> > >
> > > ppb2 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x01: irq 10
> > >
> > > pci3 at ppb2 bus 16
> > >
> > > wpi0 at pci3 dev 0 function 0 "Intel PRO/Wireless 3945ABG" rev 0x02:
> > > irq 10, MoW2, address 00:13:02:51:af:9d
> > >
> > > ppb3 at pci0 dev 28 function 3 "Intel 82801GB PCIE" rev 0x01: irq 5
> > >
> > > pci4 at ppb3 bus 32
> > >
> > > uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x01: irq 10
> > >
> > > uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x01: irq 11
> > >
> > > uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x01: irq 11
> > >
> > > uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x01: irq 5
> > >
> > > ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x01: irq 10
> > >
> > > usb0 at ehci0: USB revision 2.0
> > >
> > > uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
> > >
> > > ppb4 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe1
> > >
> > > pci5 at ppb4 bus 2
> > >
> > > cbb0 at pci5 dev 6 function 0 "TI PCIXX12 CardBus" rev 0x00: irq 11
> > >
> > > "TI PCIXX12 FireWire" rev 0x00 at pci5 dev 6 function 1 not configured
> > >
> > > "TI PCIXX12 Multimedia Card Reader" rev 0x00 at pci5 dev 6 function 2
> > > not configured
> > >
> > > sdhc0 at pci5 dev 6 function 3 "TI PCIXX12 Secure Data" rev 0x00: irq 11
> > >
> > > sdmmc0 at sdhc0
> > >
> > > "TI PCIXX12 Smart Card" rev 0x00 at pci5 dev 6 function 4 not configured
> > >
> > > cardslot0 at cbb0 slot 0 flags 0
> > >
> > > cardbus0 at cardslot0: bus 3 device 0 cacheline 0x10, lattimer 0x20
> > >
> > > pcmcia0 at cardslot0
> > >
> > > ichpcib0 at pci0 dev 31 function 0 "Intel 82801GBM LPC" rev 0x01: PM
> > disabled
> > >
> > > pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x01: DMA,
> > > channel 0 configured to compatibility, channel 1 configured to
> > > compatibility
> > >
> > > atapiscsi0 at pciide0 channel 0 drive 0
> > >
> > > scsibus0 at atapiscsi0: 2 targets
> > >
> > > cd0 at scsibus0 targ 0 lun 0: <HL-DT-ST, DVDRAM GMA-4082N, HQ04> SCSI0
> > > 5/cdrom removable
> > >
> > > cd0(pciide0:0:0): using PIO mode 4, DMA mode 2
> > >
> > > pciide0: channel 1 ignored (disabled)
> > >
> > > ahci0 at pci0 dev 31 function 2 "Intel 82801GBM AHCI" rev 0x01: irq 10,
> > AHCI 1.1
> > >
> > > scsibus1 at ahci0: 32 targets
> > >
> > > sd0 at scsibus1 targ 0 lun 0: <ATA, HTS721080G9SA00, MC4O> SCSI3
> > 0/direct fixed
> > >
> > > sd0: 76319MB, 9729 cyl, 255 head, 63 sec, 512 bytes/sec, 156301488 sec
> > total
> > >
> > > usb1 at uhci0: USB revision 1.0
> > >
> > > uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> > >
> > > usb2 at uhci1: USB revision 1.0
> > >
> > > uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> > >
> > > usb3 at uhci2: USB revision 1.0
> > >
> > > uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> > >
> > > usb4 at uhci3: USB revision 1.0
> > >
> > > uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> > >
> > > isa0 at ichpcib0
> > >
> > > isadma0 at isa0
> > >
> > > pckbc0 at isa0 port 0x60/5
> > >
> > > pckbd0 at pckbc0 (kbd slot)
> > >
> > > pckbc0: using irq 1 for kbd slot
> > >
> > > wskbd0 at pckbd0: console keyboard, using wsdisplay0
> > >
> > > pmsi0 at pckbc0 (aux slot)
> > >
> > > pckbc0: using irq 12 for aux slot
> > >
> > > wsmouse0 at pmsi0 mux 0
> > >
> > > pcppi0 at isa0 port 0x61
> > >
> > > midi0 at pcppi0: <PC speaker>
> > >
> > > spkr0 at pcppi0
> > >
> > > npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
> > >
> > > biomask effd netmask effd ttymask ffff
> > >
> > > mtrr: Pentium Pro MTRR support
> > >
> > > ugen0 at uhub1 port 1 "Broadcom Corp HP Integrated Module" rev 2.00/1.00
> > addr 2
> > >
> > > uhidev0 at uhub3 port 1 configuration 1 interface 0 "Microsoft Basic
> > > Optical Mouse" rev 1.10/0.00 addr 2
> > >
> > > uhidev0: iclass 3/1
> > >
> > > ums0 at uhidev0: 3 buttons and Z dir.
> > >
> > > wsmouse1 at ums0 mux 0
> > >
> > > ugen1 at uhub1 port 2 "AuthenTec Fingerprint Sensor" rev 1.10/6.21 addr 3
> > >
> > > softraid0 at root
> > >
> > > root on sd0a swap on sd0b dump on sd0b
> > >
> > >
> > > Links:
> > > HP description:
> > >
> > http://h10010.www1.hp.com/wwpc/us/en/sm/WF10a/321957-321957-64295-321838-3329741-1839859.html?jumpid=oc_R1002_USENC-001_HP%20Compaq%20nw9440%20Mobile%20Workstation&lang=en&cc=us
> >
> > --
> >
> > / Raimo Niskanen, Erlang/OTP, Ericsson AB
