Hi guys,
I have this notebook on which I'd like to install (and use!) OpenBSD,
but I have a little problem.
If I leave ACPI anabled, as per default on this Apr 1st snapshot, the
/bsd kernel reboots after cpu probing
(more or less, I don't have any serial so I cannot see very clearly,
it's too fast) and the /bsd.mp kernel hangs at some
acpi probing.
Enabling verbose mode is not very helpful since it scrolls down too
fast and in both cases rebooting the machine does not
leave the dmesg in memory.
I already tried disabling some random driver, but since I cannot see
where the problem is I don't even know what to
look for.
It would not be that bad living without acpi, but the MP kernel cannot
see both cpu cores, so I hope there is something
I could try.
It seems there is a problem with the audio, but I'll leave that for later. :-)
Dmesg follows, please let me know if there is something else you need
or if you have any suggestion.
BTW, acpidump core dumps, but may be related to the non-acpi kernel.
Thank you,
D.
OpenBSD 4.3-current (GENERIC) #732: Tue Apr 1 00:54:18 MDT 2008
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Genuine Intel(R) CPU T2600 @ 2.16GHz ("GenuineIntel" 686-class) 2.17 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,VMX,EST,TM2,xTPR
real mem = 2146856960 (2047MB)
avail mem = 2067857408 (1972MB)
User Kernel Config
UKC> disable acpi
422 acpi0 disabled
UKC> quit
Continuing...
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 03/05/08, BIOS32 rev. 0 @
0xf0000, SMBIOS rev. 2.4 @ 0xf3b77 (23 entries)
bios0: vendor Hewlett-Packard version "68YAF Ver. F.1C" date 03/05/2008
bios0: Hewlett-Packard HP Compaq nw9440 (EY314EA#ABZ)
acpi at bios0 function 0x0 not configured
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x2000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf07c0/208 (11 entries)
pcibios0: bad IRQ table checksum
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf9990/208 (11 entries)
pcibios0: PCI Exclusive IRQs: 5 10 11
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801FBM LPC" rev 0x00)
pcibios0: PCI bus #32 is the last bus
bios0: ROM list: 0xc0000/0xdc00 0xd0000/0x1000 0xd1000/0x1800
cpu0 at mainbus0
cpu0: unknown Enhanced SpeedStep CPU, msr 0x06130d2c06000d2c
cpu0: using only highest and lowest power states
cpu0: Enhanced SpeedStep 2167 MHz (1404 mV): speeds: 2167, 1000 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82945GM Host" rev 0x03
ppb0 at pci0 dev 1 function 0 "Intel 82945GM PCIE" rev 0x03
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 vendor "NVIDIA", unknown product 0x029b rev 0xa1
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
agp0 at vga1: no integrated graphics
azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x01: irq 10
azalia0: codec[s]: Analog Devices/0x1981, Conexant/0x2bfa, using
Analog Devices/0x1981
audio0 at azalia0
ppb1 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x01: irq 10
pci2 at ppb1 bus 8
bge0 at pci2 dev 0 function 0 "Broadcom BCM5753M" rev 0x21, BCM5750 C1
(0x4201): irq 10, address 00:16:d4:0c:fc:f0
brgphy0 at bge0 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
ppb2 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x01: irq 10
pci3 at ppb2 bus 16
wpi0 at pci3 dev 0 function 0 "Intel PRO/Wireless 3945ABG" rev 0x02:
irq 10, MoW2, address 00:13:02:51:af:9d
ppb3 at pci0 dev 28 function 3 "Intel 82801GB PCIE" rev 0x01: irq 5
pci4 at ppb3 bus 32
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x01: irq 10
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x01: irq 11
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x01: irq 11
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x01: irq 5
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x01: irq 10
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb4 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe1
pci5 at ppb4 bus 2
cbb0 at pci5 dev 6 function 0 "TI PCIXX12 CardBus" rev 0x00: irq 11
"TI PCIXX12 FireWire" rev 0x00 at pci5 dev 6 function 1 not configured
"TI PCIXX12 Multimedia Card Reader" rev 0x00 at pci5 dev 6 function 2
not configured
sdhc0 at pci5 dev 6 function 3 "TI PCIXX12 Secure Data" rev 0x00: irq 11
sdmmc0 at sdhc0
"TI PCIXX12 Smart Card" rev 0x00 at pci5 dev 6 function 4 not configured
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 3 device 0 cacheline 0x10, lattimer 0x20
pcmcia0 at cardslot0
ichpcib0 at pci0 dev 31 function 0 "Intel 82801GBM LPC" rev 0x01: PM disabled
pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x01: DMA,
channel 0 configured to compatibility, channel 1 configured to
compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <HL-DT-ST, DVDRAM GMA-4082N, HQ04> SCSI0
5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4, DMA mode 2
pciide0: channel 1 ignored (disabled)
ahci0 at pci0 dev 31 function 2 "Intel 82801GBM AHCI" rev 0x01: irq 10, AHCI 1.1
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, HTS721080G9SA00, MC4O> SCSI3 0/direct fixed
sd0: 76319MB, 9729 cyl, 255 head, 63 sec, 512 bytes/sec, 156301488 sec total
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
biomask effd netmask effd ttymask ffff
mtrr: Pentium Pro MTRR support
ugen0 at uhub1 port 1 "Broadcom Corp HP Integrated Module" rev 2.00/1.00 addr 2
uhidev0 at uhub3 port 1 configuration 1 interface 0 "Microsoft Basic
Optical Mouse" rev 1.10/0.00 addr 2
uhidev0: iclass 3/1
ums0 at uhidev0: 3 buttons and Z dir.
wsmouse1 at ums0 mux 0
ugen1 at uhub1 port 2 "AuthenTec Fingerprint Sensor" rev 1.10/6.21 addr 3
softraid0 at root
root on sd0a swap on sd0b dump on sd0b
Links:
HP description:
http://h10010.www1.hp.com/wwpc/us/en/sm/WF10a/321957-321957-64295-321838-3329741-1839859.html?jumpid=oc_R1002_USENC-001_HP%20Compaq%20nw9440%20Mobile%20Workstation&lang=en&cc=us
