the ethernet that I'm plugging work very well on old hardware and work very well ( OBSD 4.8 ) the same ethernet accurs this error: ( re(4) chip )
pciide0 at pci2 dev 0 function 0 "Marvell 88SE6101 IDE" rev 0xb2: DMA :(unsupported), channel 0 configured to native-PCI, channel 1 :configured to native-PCI The bge is onboard ethernet, and it will be disabled As I said, I booted obsd 4.8 on new hardware and the error is the same as described up, Regards 2011/7/7 Peter Hessler <[email protected]> > This machine does not have an re(4) chip in it. You need to use bge0 > for your ethernet device. > > > > On 2011 Jul 07 (Thu) at 11:39:20 -0700 (-0700), Zeb Packard wrote: > :*Sorry about the direct response Nick. :0 > : > :These two lines make me think it's a configuration problem. > : > :bge0 at pci7 dev 0 function 0 "Broadcom BCM57788" rev 0x01, BCM57780 > :A1 (0x57780001): apic 0 int 17 (irq 10), address 00:22:4d:4c:40:ee > :brgphy0 at bge0 phy 1: BCM57780 10/100/1000baseT PHY, rev. 1 > : > : > : > : > :Dmesg below. > : > :penBSD 4.9 (GENERIC.MP) #794: Wed Mar 2 07:19:02 MST 2011 > : [email protected]:/usr/src/sys/arch/i386/compile/GENERIC.MP > :cpu0: Pentium(R) Dual-Core CPU E5700 @ 3.00GHz ("GenuineIntel" 686-class) > 3 GHz > :cpu0: > FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,XSAVE > :real mem = 2135498752 (2036MB) > :avail mem = 2090401792 (1993MB) > :mainbus0 at root > :bios0 at mainbus0: AT/286+ BIOS, date 05/10/10, SMBIOS rev. 2.6 @ > :0xe9230 (58 entries) > :bios0: vendor Intel Corp. version "RKG4310H.86A.0082.2010.0510.1954" > :date 05/10/2010 > :bios0: Intel Corporation DP43BF > :acpi0 at bios0: rev 2 > :acpi0: sleep states S0 S1 S3 S4 S5 > :acpi0: tables DSDT FACP APIC MCFG HPET > :acpi0: wakeup devices P0P1(S3) PS2K(S4) PS2M(S4) UAR1(S3) P0P2(S4) > :USB0(S3) USB1(S3) USB2(S3) USB5(S3) USB6(S3) EUSB(S3) USB3(S3) > :USB4(S3) USBE(S3) PEX0(S4) PEX1(S4) PEX2(S4) PEX3(S4) PEX4(S4) > :PEX5(S4) SLPB(S4) PWRB(S3) > :acpitimer0 at acpi0: 3579545 Hz, 24 bits > :acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > :cpu0 at mainbus0: apid 0 (boot processor) > :cpu0: apic clock running at 199MHz > :cpu1 at mainbus0: apid 1 (application processor) > :cpu1: Pentium(R) Dual-Core CPU E5700 @ 3.00GHz ("GenuineIntel" 686-class) > 3 GHz > :cpu1: > FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,XSAVE > :ioapic0 at mainbus0: apid 0 pa 0xfec00000, version 20, 24 pins > :acpimcfg0 at acpi0 addr 0xf0000000, bus 0-127 > :acpihpet0 at acpi0: 14318179 Hz > :acpiprt0 at acpi0: bus 0 (PCI0) > :acpiprt1 at acpi0: bus 32 (P0P2) > :acpiprt2 at acpi0: bus 2 (PEX0) > :acpiprt3 at acpi0: bus 3 (PEX1) > :acpiprt4 at acpi0: bus 4 (PEX2) > :acpiprt5 at acpi0: bus 5 (PEX3) > :acpiprt6 at acpi0: bus 6 (PEX4) > :acpiprt7 at acpi0: bus 7 (PEX5) > :acpicpu0 at acpi0:, C3, C2, C1, PSS > :acpicpu1 at acpi0:, C3, C2, C1, PSS > :acpibtn0 at acpi0: SLPB > :acpibtn1 at acpi0: PWRB > :bios0: ROM list: 0xc0000/0xe600! 0xce800/0x400 0xcf000/0x2400 > :cpu0: Enhanced SpeedStep 2993 MHz: speeds: 3000, 2800, 2600, 2400, > :2200, 2000, 1800, 1600, 1400, 1200 MHz > :pci0 at mainbus0 bus 0: configuration mode 1 (bios) > :pchb0 at pci0 dev 0 function 0 "Intel G45 Host" rev 0x03 > :ppb0 at pci0 dev 1 function 0 "Intel G45 PCIE" rev 0x03: apic 0 int 16 > (irq 11) > :pci1 at ppb0 bus 1 > :vga1 at pci1 dev 0 function 0 vendor "NVIDIA", unknown product 0x10c3 rev > 0xa2 > :wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) > :wsdisplay0: screen 1-5 added (80x25, vt100 emulation) > :azalia0 at pci1 dev 0 function 1 vendor "NVIDIA", unknown product > :0x0be3 rev 0xa1: apic 0 int 17 (irq 10) > :azalia0: no supported codecs > :azalia0: initialization failure, detaching > :uhci0 at pci0 dev 26 function 0 "Intel 82801JI USB" rev 0x00: apic 0 > :int 16 (irq 11) > :uhci1 at pci0 dev 26 function 1 "Intel 82801JI USB" rev 0x00: apic 0 > :int 21 (irq 5) > :uhci2 at pci0 dev 26 function 2 "Intel 82801JI USB" rev 0x00: apic 0 > :int 18 (irq 3) > :ehci0 at pci0 dev 26 function 7 "Intel 82801JI USB" rev 0x00: apic 0 > :int 18 (irq 3) > :ehci0: timed out waiting for BIOS > :usb0 at ehci0: USB revision 2.0 > :uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 > :azalia1 at pci0 dev 27 function 0 "Intel 82801JI HD Audio" rev 0x00: > :apic 0 int 22 (irq 7) > :azalia1: codecs: Realtek ALC888 > :audio0 at azalia1 > :ppb1 at pci0 dev 28 function 0 "Intel 82801JI PCIE" rev 0x00: apic 0 > :int 17 (irq 10) > :pci2 at ppb1 bus 2 > :pciide0 at pci2 dev 0 function 0 "Marvell 88SE6101 IDE" rev 0xb2: DMA > :(unsupported), channel 0 configured to native-PCI, channel 1 > :configured to native-PCI > :pciide0: using apic 0 int 16 (irq 11) for native-PCI interrupt > :pciide0: channel 0 ignored (not responding; disabled or no drives?) > :pciide0: channel 1 ignored (not responding; disabled or no drives?) > :ppb2 at pci0 dev 28 function 1 "Intel 82801JI PCIE" rev 0x00: apic 0 > :int 16 (irq 11) > :pci3 at ppb2 bus 3 > :ppb3 at pci0 dev 28 function 2 "Intel 82801JI PCIE" rev 0x00: apic 0 > :int 18 (irq 3) > :pci4 at ppb3 bus 4 > :ppb4 at pci0 dev 28 function 3 "Intel 82801JI PCIE" rev 0x00: apic 0 > :int 19 (irq 11) > :pci5 at ppb4 bus 5 > :ppb5 at pci0 dev 28 function 4 "Intel 82801JI PCIE" rev 0x00: apic 0 > :int 17 (irq 10) > :pci6 at ppb5 bus 6 > :vendor "VIA", unknown product 0x3403 (class serial bus subclass > :Firewire, rev 0x00) at pci6 dev 0 function 0 not configured > :ppb6 at pci0 dev 28 function 5 "Intel 82801JI PCIE" rev 0x00: apic 0 > :int 16 (irq 11) > :pci7 at ppb6 bus 7 > :bge0 at pci7 dev 0 function 0 "Broadcom BCM57788" rev 0x01, BCM57780 > :A1 (0x57780001): apic 0 int 17 (irq 10), address 00:22:4d:4c:40:ee > :brgphy0 at bge0 phy 1: BCM57780 10/100/1000baseT PHY, rev. 1 > :uhci3 at pci0 dev 29 function 0 "Intel 82801JI USB" rev 0x00: apic 0 > :int 23 (irq 10) > :uhci4 at pci0 dev 29 function 1 "Intel 82801JI USB" rev 0x00: apic 0 > :int 19 (irq 11) > :uhci5 at pci0 dev 29 function 2 "Intel 82801JI USB" rev 0x00: apic 0 > :int 18 (irq 3) > :ehci1 at pci0 dev 29 function 7 "Intel 82801JI USB" rev 0x00: apic 0 > :int 23 (irq 10) > :ehci1: timed out waiting for BIOS > :usb1 at ehci1: USB revision 2.0 > :uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1 > :ppb7 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0x90 > :pci8 at ppb7 bus 32 > :pcib0 at pci0 dev 31 function 0 "Intel 82801JIR LPC" rev 0x00 > :pciide1 at pci0 dev 31 function 2 "Intel 82801JI SATA" rev 0x00: DMA, > :channel 0 configured to native-PCI, channel 1 configured to native-PCI > :pciide1: using apic 0 int 19 (irq 11) for native-PCI interrupt > :wd0 at pciide1 channel 0 drive 0: <SAMSUNG HD502HJ> > :wd0: 16-sector PIO, LBA48, 476940MB, 976773168 sectors > :wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 6 > :ichiic0 at pci0 dev 31 function 3 "Intel 82801JI SMBus" rev 0x00: apic > :0 int 18 (irq 3) > :iic0 at ichiic0 > :spdmem0 at iic0 addr 0x50: 2GB DDR3 SDRAM PC3-10600 > :pciide2 at pci0 dev 31 function 5 "Intel 82801JI SATA" rev 0x00: DMA, > :channel 0 wired to native-PCI, channel 1 wired to native-PCI > :pciide2: using apic 0 int 19 (irq 11) for native-PCI interrupt > :usb2 at uhci0: USB revision 1.0 > :uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > :usb3 at uhci1: USB revision 1.0 > :uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > :usb4 at uhci2: USB revision 1.0 > :uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > :usb5 at uhci3: USB revision 1.0 > :uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > :usb6 at uhci4: USB revision 1.0 > :uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > :usb7 at uhci5: USB revision 1.0 > :uhub7 at usb7 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > :isa0 at pcib0 > :isadma0 at isa0 > :com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo > :pckbc0 at isa0 port 0x60/5 > :pckbd0 at pckbc0 (kbd slot) > :pckbc0: using irq 1 for kbd slot > :wskbd0 at pckbd0: console keyboard, using wsdisplay0 > :pcppi0 at isa0 port 0x61 > :spkr0 at pcppi0 > :it0 at isa0 port 0x2e/2: IT8721F rev 1, EC port 0xa00 > :npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 > :mtrr: Pentium Pro MTRR support > :vscsi0 at root > :scsibus0 at vscsi0: 256 targets > :softraid0 at root > :root on wd0a swap on wd0b dump on wd0b > : > > -- > Flying saucers on occasion > Show themselves to human eyes. > Aliens fume, put off invasion > While they brand these tales as lies.
