the following lines are what I added to the NET4801 config file that I found on the web:
option SYSVMSG # System V-like message queues option SYSVSEM # System V-like semaphores option SYSVSHM # System V-like memory sharing These were in an archive post from someone having a similar problem. I don't know if all of them are neccesary, but someone with a better understanding of apache could probably tell you. Marti On 7/28/05, Spruell, Darren-Perot <[EMAIL PROTECTED]> wrote: > Marti, > > Greetings from Phoenix. ;) > > What are the specifics of that kernel config that relate to working with > httpd? > > Just curious... > > -- > Darren Spruell > Information Security Operations > Catholic Healthcare West IT > (602)307-2217 > [EMAIL PROTECTED] > > > -----Original Message----- > > From: Marti Martinez [mailto:[EMAIL PROTECTED] > > Sent: Thursday, July 28, 2005 8:31 AM > > To: [email protected] > > Subject: Fwd: OpenBSD 3.7 on Soekris (w/ httpd) > > > > > > On 7/27/05, Nick Holland <[EMAIL PROTECTED]> wrote: > > > > > > If nothing else, dmesg tells us if someone is running a Theo-built > > > kernel, a home-built GENERIC (which we have to take with a > > big grain of > > > salt until we commit those changes that prevent even root > > from editing > > > /usr/src/sys/arch/*/conf/GENERIC), or a definite Ricer, which are > > > details that aren't always communicated accurately through > > other means. > > > > > > > > If in doubt, send the dmesg. If you think it isn't > > necessary, send the > > > dmesg. > > > > > Nick. > > > (dmesg, dammit!) > > > > > > > In this vein, no one has put a Soekris 4801 kernel config file out > > there that works with httpd, so wihtout further ado, > > > > /usr/src/sys/arch/i386/conf/NET4801 (stripped for size, but thanks > > mostly to [EMAIL PROTECTED]): > > machine i386 > > option DDB > > option DIAGNOSTIC > > option KTRACE > > option CRYPTO > > option SYSVMSG > > option SYSVSEM > > option SYSVSHM > > option FFS > > option MFS > > option TCP_SACK > > option FDESC > > option FIFO > > option KERNFS > > option PROCFS > > option INET > > option ALTQ > > option IPSEC > > option BOOT_CONFIG > > option I586_CPU > > option USER_PCICONF > > maxusers 32 > > config bsd root on wd0a > > mainbus0 at root > > cpu0 at mainbus0 apid ? > > bios0 at mainbus0 apid ? > > apm0 at bios0 flags 0x0000 > > pcibios0 at bios0 flags 0x0000 > > isa0 at mainbus0 > > isa0 at pcib? > > pci* at mainbus0 bus ? > > ohci* at pci? > > usb* at ohci? > > option PCCOMCONSOLE > > option CONSPEED=19200 > > option PCIVERBOSE > > uhub* at usb? > > uhub* at uhub? port ? configuration ? > > umodem* at uhub? port ? configuration ? > > ucom* at umodem? > > ugen* at uhub? port ? configuration ? > > pchb* at pci? dev ? function ? > > geodesc* at pci? dev ? function ? > > nsclpcsio* at isa? port 0x2e > > nsclpcsio* at isa? port 0x4e > > gpio* at nsclpcsio? > > gscsio* at isa? port 0x2e > > gscsio* at isa? port 0x15c > > iic0 at gscsio? > > iic1 at gscsio? > > lmtemp0 at iic1 addr 0x48 > > ppb* at pci? dev ? function ? > > pci* at ppb? bus ? > > pci* at pchb? bus ? > > pcib* at pci? dev ? function ? > > npx0 at isa? port 0xf0 irq 13 > > isadma0 at isa? > > pccom0 at isa? port 0x3f8 irq 4 > > pccom1 at isa? port 0x2f8 irq 3 > > pciide* at pci ? dev ? function ? flags 0x0000 > > wdc0 at isa? port 0x1f0 irq 14 flags 0x00 > > wd* at wdc? channel ? drive ? flags 0x0000 > > wd* at pciide? channel ? drive ? flags 0x0000 > > sis* at pci? dev ? function ? > > nsphyter* at mii? phy ? > > hifn* at pci? dev ? function ? > > wi* at pci? dev ? function ? > > ath* at pci? dev ? function ? > > pseudo-device crypto 1 > > pseudo-device ksyms 1 > > pseudo-device systrace 1 > > pseudo-device pf > > pseudo-device pflog > > pseudo-device pfsync > > pseudo-device loop 2 > > pseudo-device bpfilter 16 > > pseudo-device tun 2 > > pseudo-device enc 1 > > pseudo-device bridge 2 > > pseudo-device vlan 32 > > pseudo-device gre 4 > > pseudo-device pty 32 > > pseudo-device gif 4 > > > > and dmesg: > > OpenBSD 3.7 (NET4801) #1: Wed Jul 27 12:50:50 MST 2005 > > [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/NET4801 > > cpu0: Geode(TM) Integrated Processor by National Semi ("Geode by NSC" > > 586-class) 267 MHz > > cpu0: FPU,TSC,MSR,CX8,CMOV,MMX > > cpu0: TSC disabled > > real mem = 133799936 (130664K) > > avail mem = 119418880 (116620K) > > using 1658 buffers containing 6791168 bytes (6632K) of memory > > mainbus0 (root) > > bios0 at mainbus0: AT/286+(00) BIOS, date 20/41/22, BIOS32 > > rev. 0 @ 0xf7840 > > pcibios0 at bios0: rev 2.0 @ 0xf0000/0x10000 > > pcibios0: pcibios_get_intr_routing - function not supported > > pcibios0: PCI IRQ Routing information unavailable. > > pcibios0: PCI bus #0 is the last bus > > bios0: ROM list: 0xc8000/0x9000 > > cpu0 at mainbus0 > > pci0 at mainbus0 bus 0: configuration mode 1 (bios) > > pchb0 at pci0 dev 0 function 0 "Cyrix GXm PCI" rev 0x00 > > sis0 at pci0 dev 6 function 0 "NS DP83815 10/100" rev 0x00: DP83816A, > > irq 10, address 00:00:24:c4:81:58 > > nsphyter0 at sis0 phy 0: DP83815 10/100 PHY, rev. 1 > > sis1 at pci0 dev 7 function 0 "NS DP83815 10/100" rev 0x00: DP83816A, > > irq 10, address 00:00:24:c4:81:59 > > nsphyter1 at sis1 phy 0: DP83815 10/100 PHY, rev. 1 > > sis2 at pci0 dev 8 function 0 "NS DP83815 10/100" rev 0x00: DP83816A, > > irq 10, address 00:00:24:c4:81:5a > > nsphyter2 at sis2 phy 0: DP83815 10/100 PHY, rev. 1 > > pcib0 at pci0 dev 18 function 0 "NS SC1100 ISA" rev 0x00 > > "NS SC1100 SMI/ACPI" rev 0x00 at pci0 dev 18 function 1 not configured > > pciide0 at pci0 dev 18 function 2 "NS SCx200 IDE" rev 0x01: DMA, > > channel 0 wired to compatibility, channel 1 wired to compatibility > > wd0 at pciide0 channel 0 drive 1: <SAMSUNG CF/ATA> > > wd0: 1-sector PIO, LBA, 996MB, 2041200 sectors > > wd0(pciide0:0:1): using PIO mode 4 > > geodesc0 at pci0 dev 18 function 5 "NS SC1100 X-Bus" rev 0x00: iid 6 > > revision 3 wdstatus 0 > > ohci0 at pci0 dev 19 function 0 "Compaq USB OpenHost" rev 0x08: irq > > 11, version 1.0, legacy support > > usb0 at ohci0: USB revision 1.0 > > uhub0 at usb0 > > uhub0: Compaq OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > > uhub0: 3 ports with 3 removable, self powered > > isa0 at pcib0 > > isadma0 at isa0 > > nsclpcsio0 at isa0 port 0x2e/2: NSC PC87366 rev 9: GPIO VLM TMS > > gpio0 at nsclpcsio0: 29 pins > > gscsio0 at isa0 port 0x15c/2: SC1100 SIO rev 1: > > npx0 at isa0 port 0xf0/16: using exception 16 > > pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo > > pccom0: console > > pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo > > biomask fbe7 netmask ffe7 ttymask ffe7 > > dkcsum: wd0 matched BIOS disk 80 > > root on wd0a > > rootdev=0x0 rrootdev=0x300 rawdev=0x302 > > > > > > -- > > Systems Programmer, Senior > > Electrical & Computer Engineering > > The University of Arizona > > [EMAIL PROTECTED] > > > > > > -- Systems Programmer, Senior Electrical & Computer Engineering The University of Arizona [EMAIL PROTECTED]
