Hi, the code is available in https://github.com/scottalford75/Remora - looks like he though that spiPRU is not a great name and changed it to something more flashy.
Looks interesting from programming point of view, but I wonder how many people would buy Smoothieboard and RPi both to run 3D printer with LinuxCNC on it? Most will stay with Smoothie, I think. Cern. Dne úterý 16. února 2021 v 19:18:20 UTC+1 uživatel [email protected] napsal: > I was about to start on setting up a Xylotex BareBoneCNC with a > BBB/Machinekit and thought I'd look at what's going on with Raspberry Pi in > CNC world. I found a video of a guy driving a Mesa board over USB with > LinuxCNC and it looked impressive(doesn't take much). > > Got to wondering if a standard 3DP controller like SKR, Smoothieboard, etc > couldn't run firmware similar to the MESA board and only found mention of > this spiPRU but no details, code, anything. > > https://github.com/scottalford75/LinuxCNC-on-RPi > > I searched for spiPRU here and in general inter-web lands and found > nothing but the mention of it in the above git repo. If anyone knew about > it I figured they would be here. > Thx > -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/machinekit/cf8da989-60c5-47f8-8db5-c158cb41d0ban%40googlegroups.com.
