I was about to start on setting up a Xylotex BareBoneCNC with a BBB/Machinekit and thought I'd look at what's going on with Raspberry Pi in CNC world. I found a video of a guy driving a Mesa board over USB with LinuxCNC and it looked impressive(doesn't take much).
Got to wondering if a standard 3DP controller like SKR, Smoothieboard, etc couldn't run firmware similar to the MESA board and only found mention of this spiPRU but no details, code, anything. https://github.com/scottalford75/LinuxCNC-on-RPi I searched for spiPRU here and in general inter-web lands and found nothing but the mention of it in the above git repo. If anyone knew about it I figured they would be here. Thx -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/machinekit/759bdd2d-5eb2-4a75-8716-a1cf12277f7dn%40googlegroups.com.
