On 2/21/2021 11:58 AM, Doug LaRue wrote:
I don't want to start up a Machinekit vs LinuxCNC argument but the
developer of Remora has been using LinuxCNC with the 2.8-rtpreempt kernel
which seem way out of date.
I know this group has been doing Machinekit on the BBB SBC for far longer
and for a while were using the Xenomai kernel but switched to the rtPreempt
and is using Preempt_rt v4.9 and provides pre-built images.
Do any of the developers here see a reason why this SPI implementation
can't work with Machinekit and why it might even be better doing it?
I don't see why an SPI interface shouldn't work with Machinekit.
I also like the fact that, IIRC, devs here created QtQuickVCP which is a
better UI system for these SBC implementations.
I don't see an current docs for Machinekit on rPi4, only and old one for
rPi2/3. It's been quite a while since I built Machinekit from source
for the BBB so I've not looked at the current state for doing that on the
latest rPiOS.
I haven't been building Machinekit much, but I have been doing a lot of
work recently on the RPi4. I may be able to help if you get stuck on
something.
--
Charles Steinkuehler
[email protected]
--
website: http://www.machinekit.io blog: http://blog.machinekit.io github:
https://github.com/machinekit
---
You received this message because you are subscribed to the Google Groups "Machinekit" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/machinekit/b2f9ea5e-bf70-1e0e-3f3b-bf968b737630%40steinkuehler.net.
