** Description changed: [ Impact ] - * For QAT Gen5 (available on Intel GraniteRapids-D Kaseyville platform), the driver qat_420xx - fails to load the firmware and this causes QAT device to not work properly + * For QAT Gen5 (available on Intel GraniteRapids-D Kaseyville platform), the driver qat_420xx + fails to load the firmware and this causes QAT device to not work properly + + This is applicable for these kernels: + - Noble generic kernel (6.8) and HWE (6.11) + - Oracular generic kernel (6.11) [ Test Plan ] - * On boot, this kernel message can be found: + * On boot, this kernel message can be found: Apr 07 22:05:36 ubuntu kernel: 420xx 0000:01:00.0: Direct firmware load for qat_420xx_mmp.bin failed with error -2 Apr 07 22:05:36 ubuntu kernel: 420xx 0000:01:00.0: Failed to load MMP firmware qat_420xx_mmp.bin Apr 07 22:05:36 ubuntu kernel: 420xx 0000:01:00.0: Failed to load acceleration FW - [ Where problems could occur ] - * The firmware are standalone binaries and only loaded by the QAT qat_420xx kernel module - No regression should be expected. + * The firmware are standalone binaries and only loaded by the QAT qat_420xx kernel module + No regression should be expected. [ Other Info ] - * The firmware files to backport are : - qat_420xx.bin - qat_420xx_mmp.bin - - They are both part of the linux-firmware package in Plucky. + * The firmware files to backport are : + qat_420xx.bin + qat_420xx_mmp.bin + + They are both part of the linux-firmware package in Plucky.
** Description changed: [ Impact ] * For QAT Gen5 (available on Intel GraniteRapids-D Kaseyville platform), the driver qat_420xx fails to load the firmware and this causes QAT device to not work properly - - This is applicable for these kernels: - - Noble generic kernel (6.8) and HWE (6.11) - - Oracular generic kernel (6.11) + + This is applicable for these kernels: + - Noble generic kernel (6.8) and HWE (6.11) + - Oracular generic kernel (6.11) [ Test Plan ] * On boot, this kernel message can be found: Apr 07 22:05:36 ubuntu kernel: 420xx 0000:01:00.0: Direct firmware load for qat_420xx_mmp.bin failed with error -2 Apr 07 22:05:36 ubuntu kernel: 420xx 0000:01:00.0: Failed to load MMP firmware qat_420xx_mmp.bin Apr 07 22:05:36 ubuntu kernel: 420xx 0000:01:00.0: Failed to load acceleration FW + + * We can also run cpa_sample_code application to validate the QAT functionality + $ sudo apt install -y qatlib-service qatlib-examples + $ sudo cpa_sample_code + The cpa_sample_code should detect QAT devices and run successfully [ Where problems could occur ] * The firmware are standalone binaries and only loaded by the QAT qat_420xx kernel module No regression should be expected. [ Other Info ] * The firmware files to backport are : qat_420xx.bin qat_420xx_mmp.bin They are both part of the linux-firmware package in Plucky. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-firmware in Ubuntu. https://bugs.launchpad.net/bugs/2106436 Title: Add support for QAT Gen5 device with the 420xx (CPM2.2) firmware Status in linux-firmware package in Ubuntu: Triaged Status in linux-firmware source package in Noble: Triaged Status in linux-firmware source package in Oracular: Triaged Bug description: [ Impact ] * For QAT Gen5 (available on Intel GraniteRapids-D Kaseyville platform), the driver qat_420xx fails to load the firmware and this causes QAT device to not work properly This is applicable for these kernels: - Noble generic kernel (6.8) and HWE (6.11) - Oracular generic kernel (6.11) [ Test Plan ] * On boot, this kernel message can be found: Apr 07 22:05:36 ubuntu kernel: 420xx 0000:01:00.0: Direct firmware load for qat_420xx_mmp.bin failed with error -2 Apr 07 22:05:36 ubuntu kernel: 420xx 0000:01:00.0: Failed to load MMP firmware qat_420xx_mmp.bin Apr 07 22:05:36 ubuntu kernel: 420xx 0000:01:00.0: Failed to load acceleration FW * We can also run cpa_sample_code application to validate the QAT functionality $ sudo apt install -y qatlib-service qatlib-examples $ sudo cpa_sample_code The cpa_sample_code should detect QAT devices and run successfully [ Where problems could occur ] * The firmware are standalone binaries and only loaded by the QAT qat_420xx kernel module No regression should be expected. [ Other Info ] * The firmware files to backport are : qat_420xx.bin qat_420xx_mmp.bin They are both part of the linux-firmware package in Plucky. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux-firmware/+bug/2106436/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
