>>>HPOJ running? >>>error: Yes, HPOJ is running. HPLIP is not compatible with HPOJ. To run HPLIP, >>>please remove HPOJ.
This is a problem. Please remove hpoj and restart hplip and try again. As well: >>>Checking for dependency 'libnetsnmp-devel (libnetsnmp-devel - SNMP networking >>>library development files)'... >>>error: Not found! >>>error: This is a REQUIRED dependency. Ensure that libnetsnmp-devel is installed. This is the network protocal and will cause problems if it's missing. Hope this helps! A On 1/10/07, Matthias Hänel <[EMAIL PROTECTED]> wrote: > Hello Aaron, > > Am Mittwoch, 10. Januar 2007 00:27 schrieb Aaron: > > The C6100 series is supported as of HPLIP 1.6.9. > > Thank you for your quick answer! > > > > It appears that hplip is not running. > > > > What happens if you run; > > > > /etc/init.d/hplip restart > > Yes, it works now :) > > > > Also run hp-check and post the output. > > > > If you get any errros afrer running hplip restart, run in another > > terminal-- tail -f /var/log/messages and then re-run the > > /etc/init.d/hplip restart and post any errors in the > > /car/log/messages. > > I started hp-toolbox and tried to run a scan. Unfortunately, it started kookoa > and it didn't recognize the scanner :( > > Maybe it's because I am trying to use the scanner over wireless LAN? > > > > hp-check gives me: > hp-check > > HP Linux Imaging and Printing System (ver. 1.6.10) > Dependency/Version Check Utility ver. 4.0 > > Copyright (c) 2003-6 Hewlett-Packard Development Company, LP > This software comes with ABSOLUTELY NO WARRANTY. > This is free software, and you are welcome to distribute it > under certain conditions. See COPYING file for more details. > > > --------------- > | SYSTEM INFO | > --------------- > > Basic system info (uname -a): > --> Linux linux 2.6.18.2-34-default #1 SMP Mon Nov 27 11:46:27 UTC 2006 > x86_64 x86_64 x86_64 GNU/Linux > > Detected distro (/etc/issue): > --> suse 10.2 > > Detected distro (lsb_release): > --> SUSE LINUX 10.2 (n/a) > > Currently installed version... > --> OK, HPLIP 1.6.10 currently installed in '/usr/share/hplip'. > > Current contents of '/etc/hp/hplip.conf' file: > # hplip.conf > > [hpiod] > # port=0 (dynamic IP port) > port=2208 (IANA IP port) > [hpssd] > # port=0 (dynamic IP port) > port=2207 (IANA IP port) > > [hplip] > version=1.6.10 > jdprobe=0 > > [dirs] > home=/usr/share/hplip > run=/var/run > ppd=/usr/share/cups/model/manufacturer-PPDs/hplip > doc=/usr/share/doc/packages/hplip > > # Following values are determined at configure time and cannot be changed. > [configure] > network-build=1 > pp-build=1 > gui-build=1 > scanner-build=1 > fax-build=1 > internal-tag=1.6.10.11 > > > HPLIP running? > --> Yes, HPLIP is running (OK). > > HPOJ running? > error: Yes, HPOJ is running. HPLIP is not compatible with HPOJ. To run HPLIP, > please remove HPOJ. > > Checking Python version... > --> OK, version 2.5.0 installed > > ---------------- > | DEPENDENCIES | > ---------------- > > > Checking for dependency 'libcrypto (libcrypto - OpenSSL cryptographic > library)'... > --> OK, found. > > Checking for dependency 'gcc (gcc - GNU Project C and C++ Compiler)'... > --> OK, found. > > Checking for dependency 'sane (SANE - Scanning library)'... > --> OK, found. > > Checking for dependency 'gs (GhostScript - PostScript and PDF language > interpreter and previewer)'... > --> OK, found. > > Checking for dependency 'libjpeg (libjpeg - JPEG library)'... > --> OK, found. > > Checking for dependency 'libpthread (libpthread - POSIX threads library)'... > --> OK, found. > > Checking for dependency 'make (make - GNU make utility to maintain groups of > programs)'... > --> OK, found. > > Checking for dependency 'python-devel (python-devel - Python development > files)'... > --> OK, found. > > Checking for dependency 'reportlab (Reportlab - PDF library for Python)'... > error: Not found! > This is an OPTIONAL dependency. > > Checking for dependency 'pyqt (PyQt - Qt interface for Python)'... > --> OK, found. > > Checking for dependency 'cups-devel (cups-devel- Common Unix Printing System > development files)'... > --> OK, found. > > Checking for dependency 'ppdev (ppdev - Parallel port support kernel > module.)'... > error: Not found! > error: This is a REQUIRED dependency. > > Checking for dependency 'libusb (libusb - USB library)'... > --> OK, found. > > Checking for dependency 'scanimage (scanimage - Shell scanning program)'... > --> OK, found. > > Checking for dependency 'libnetsnmp-devel (libnetsnmp-devel - SNMP networking > library development files)'... > error: Not found! > error: This is a REQUIRED dependency. > > Checking for dependency 'python2x (Python 2.2 or greater - Python programming > language)'... > --> OK, found. > > Checking for dependency 'lsb (LSB - Linux Standard Base support)'... > --> OK, found. > > Checking for dependency 'xsane (xsane - Graphical scanner frontend for > SANE)'... > --> OK, found. > > Checking for dependency 'cups (cups - Common Unix Printing System)'... > error: Not found! > error: This is a REQUIRED dependency. > > Checking for dependency 'python23 (Python 2.3 or greater - Required for fax > functionality)'... > --> OK, found. > > > ---------------------- > | INSTALLED PRINTERS | > ---------------------- > > > No queues found. > > ---------------------- > | SANE CONFIGURATION | > ---------------------- > > 'hpaio' in /etc/sane.d/dll.conf'... > --> OK, found. SANE backend 'hpaio' is not properly set up. > > Checking output of 'scanimage -L'... > > No scanners were identified. If you were expecting something different, > check that the scanner is plugged in, turned on and detected by the > sane-find-scanner tool (if appropriate). Please read the documentation > which came with this software (README, FAQ, manpages). > > > --------------------- > | PYTHON EXTENSIONS | > --------------------- > > Checking 'cupsext' CUPS extension... > --> OK, found. > > Checking 'pcardext' Photocard extension... > --> OK, found. > > > %d errors were detected. > Please refer to the installation instructions at: > http://hplip.sourceforge.net/install/index.html > > > thank you in advance! > Matthias > > > > > > On 1/9/07, Matthias Hänel <[EMAIL PROTECTED]> wrote: > > > Hello, > > > > > > I bought an C6180 it works on windows and MacOSX like a charm. > > > It prints on SuSE 10.2 as well. Unfortunetaly, I can't scan with it under > > > Linux. > > > > > > > > > Whenever I try to start hp-setup I get the following messages: > > > ================================================ > > > > > > ./hp-setup > > > > > > HP Linux Imaging and Printing System (ver. 1.6.10) > > > Printer/Fax Setup Utility ver. 3.1 > > > > > > Copyright (c) 2003-6 Hewlett-Packard Development Company, LP > > > This software comes with ABSOLUTELY NO WARRANTY. > > > This is free software, and you are welcome to distribute it > > > under certain conditions. See COPYING file for more details. > > > > > > 0 > > > Unable to connect to HPLIP I/O (hpssd). > > > error: Unable to connect to HPLIP I/O. Please (re)start HPLIP and try > > > again. > > > > > > > > > and hp-toolbox doesn't run as well: > > > =========================== > > > > > > linux:/home/matthias # hp-toolbox > > > > > > HP Linux Imaging and Printing System (ver. 1.6.10) > > > HP Device Manager ver. 6.3 > > > > > > Copyright (c) 2003-6 Hewlett-Packard Development Company, LP > > > This software comes with ABSOLUTELY NO WARRANTY. > > > This is free software, and you are welcome to distribute it > > > under certain conditions. See COPYING file for more details. > > > > > > error: Unable to connect to HPLIP I/O. Check and make sure HPLIP is > > > running. error: Unable to create client object. > > > > > > > > > > > > > > > I know it is currently not supported officially. The installed version of > > > hplip is 1.6.10. Do you have an idea what I can do? Do you plan to > > > support OpenSuSE 10.2 in the future? > > > > > > > > > thank you and best regards > > > Matthias > > > > > > > > > ------------------------------------------------------------------------- > > > Take Surveys. Earn Cash. Influence the Future of IT > > > Join SourceForge.net's Techsay panel and you'll get the chance to share > > > your opinions on IT & business topics through brief surveys - and earn > > > cash > > > http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV > > > _______________________________________________ > > > HPLIP-Help mailing list > > > [email protected] > > > https://lists.sourceforge.net/lists/listinfo/hplip-help > -- I don't care, I'm still free. You can't take the sky from me. - "Firefly" ------------------------------------------------------------------------- Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys - and earn cash http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV _______________________________________________ HPLIP-Help mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/hplip-help
