> Your depth is 24. 3D depths are only 16bit and 32bit. The Mach64 is > really not powerful enough to handle 32bit (which is what 24 yeilds in > XFree86 4.1). I'm not even sure if the driver supports 32bit depth, but > it's not a good idea anyway. Plus you're going to get better overall > quality at 1024x768@16. I can never notice a difference between 16 and > 32 bit, but then, I don't have a ugly nvidia ;-) > > Jens-Peter Konrath wrote: > > >Hi mach64 developers! > >I grapped the new mach-0-0-2-branch yesterday and installed it > >rightaway. After reducing the max resolution to 800x600 @ 24 bpp, I > >could (finally) load drm. But now the drm module complains to me: > >"cannot map registers", the screen stays black and the text consoles are > >corrupted. The only way out is to shut down the machine and restart it. > >Any ideas? (BTW, my machine is an AMD k6-III, VIA MVP3 chipset, AGP Rage > >PRO with 8 MB RAM) > > > >TIA > > > >Jens > > > > > >_______________________________________________ > >Dri-devel mailing list > >[EMAIL PROTECTED] > >https://lists.sourceforge.net/lists/listinfo/dri-devel > > > > Thanx for the help,folks"! It was both the color depth and the factthat XAA was disabled! But then, isn't XAA still disabled by the dri code? What's more, the picture on my monitor is partially distorted (just the first few lines), and it goes off and on again fromtimeto time.Maybe overdriven... Anybody else experiencing this behaviour with their monitors despite DDC? Jens
-- GMX - Die Kommunikationsplattform im Internet. http://www.gmx.net _______________________________________________ Dri-devel mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/dri-devel
