From: Louis Chauvet <[email protected]>

As stated in the AM62x Technical Reference Manual (SPRUIV7B)[1], the data
sampling edge needs to be configured in two distinct registers: one in the
TIDSS IP and another in the memory-mapped control register modules. Since
the latter is not within the same address range, a phandle to a syscon
device is used to access the regmap.

Configure the CTRL_MMR register, as mentioned in the Technical Reference
Manual to fix sampling edge.

[1]: https://www.ti.com/lit/ug/spruiv7b/spruiv7b.pdf

Fixes: ad2ac9dc9426 ("drm/tidss: Add support for AM625 DSS")
Fixes: 5cc5ea7b6d7b ("drm/tidss: Add support for AM62A7 DSS")
Cc: [email protected]
Signed-off-by: Louis Chauvet <[email protected]>
Signed-off-by: Swamil Jain <[email protected]>
---
 drivers/gpu/drm/tidss/tidss_dispc.c | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/drivers/gpu/drm/tidss/tidss_dispc.c 
b/drivers/gpu/drm/tidss/tidss_dispc.c
index d8e1a1bcd660..d09eecb72dc0 100644
--- a/drivers/gpu/drm/tidss/tidss_dispc.c
+++ b/drivers/gpu/drm/tidss/tidss_dispc.c
@@ -500,6 +500,7 @@ struct dispc_device {
        const struct dispc_features *feat;
 
        struct clk *fclk;
+       struct regmap *clk_ctrl;
 
        bool is_enabled;
 
@@ -1234,6 +1235,11 @@ void dispc_vp_prepare(struct dispc_device *dispc, u32 
hw_videoport,
                                  mode->crtc_hdisplay - 1) |
                       FIELD_PREP(DISPC_VP_SIZE_SCREEN_VDISPLAY_MASK,
                                  mode->crtc_vdisplay - 1));
+
+       if (dispc->clk_ctrl) {
+               regmap_update_bits(dispc->clk_ctrl, 0, 0x100, ipc ? 0x100 : 
0x000);
+               regmap_update_bits(dispc->clk_ctrl, 0, 0x200, rf ? 0x200 : 
0x000);
+       }
 }
 
 void dispc_vp_enable(struct dispc_device *dispc, u32 hw_videoport)
@@ -3003,6 +3009,14 @@ int dispc_init(struct tidss_device *tidss)
 
        dispc_init_errata(dispc);
 
+       dispc->clk_ctrl = 
syscon_regmap_lookup_by_phandle_optional(tidss->dev->of_node,
+                                                                  
"ti,clk-ctrl");
+       if (IS_ERR(dispc->clk_ctrl)) {
+               r = dev_err_probe(dispc->dev, PTR_ERR(dispc->clk_ctrl),
+                                 "DISPC: syscon_regmap_lookup_by_phandle 
failed.\n");
+               return r;
+       }
+
        dispc->fourccs = devm_kcalloc(dev, ARRAY_SIZE(dispc_color_formats),
                                      sizeof(*dispc->fourccs), GFP_KERNEL);
        if (!dispc->fourccs)

Reply via email to