On Wed, 18 Mar, 2020, 7:43 PM Alan Cudmore, <alan.cudm...@gmail.com> wrote:
> This is probably not a comprehensive list, but currently all models except > the Pi 4 are working thanks to Niteesh’s work on the uart for the Pi 3 and > Zero W. > > > > I believe there is some support for GPIO, and I2C. > > I’m not sure about the state of SPI. > > There is also support for the graphics console, but I don’t know that > state of that with the various Pi models as well. > > > > Finally, there was an effort to port libbsd to the Pi, but I don’t think > it was completed. > > > > From what I know the Pi 4 is not supported at all yet. > > > > So there is still a lot of work to do, maybe too much for a single GSoC > project. > > Maybe try to narrow the focus on something like: > > - Libbsd and SMP support for the Raspberry Pi 3? > > That is a great idea. Thanks for the suggestion. Will this will be more useful than my current proposal?( Which is based on Release note generator and code formatter.). I have been learning how to use RTEMS and rtems-libbsd on the beaglebone > black lately. Having that capability along with SMP on the Pi 3 would be > great. > > > > > > Alan > > > > > > > > *From: *Joel Sherrill <j...@rtems.org> > *Sent: *Tuesday, March 17, 2020 11:19 PM > *To: *Denil Verghese <denil...@gmail.com> > *Cc: *rtems-de...@rtems.org <devel@rtems.org> > *Subject: *Re: Improve the Raspberry Pi BSP > > > > > > On Sun, Mar 15, 2020, 10:20 PM Denil Verghese <denil...@gmail.com> wrote: > > Hi, > > I would like to know whether the projects shown in this > https://devel.rtems.org/ticket/2899 ticket is completed or not. If the > ideas are yet to implement I could work on it. > > > > I think there is plenty left. I am not authoritative on this though. > > > > I think getting Pi3/4 support still has work. > > > > I think USB plus Ethernet. > > > > I recall the graphics work was done on the Beagle. > > > > I am not even sure that Pi2 qemu support has been worked through > completely. > > > > > > > > It will more interesting to work those projects rather than my currently > selected project which is Release Note Generator. > > Meanwhile I have uploaded my draft proposal which is ongoing self revision. > > > > Thank you > > Denil C Verghese > > > > _______________________________________________ > devel mailing list > devel@rtems.org > http://lists.rtems.org/mailman/listinfo/devel > > >
_______________________________________________ devel mailing list devel@rtems.org http://lists.rtems.org/mailman/listinfo/devel