Hello all, The current status of the project is that I could port the tda drivers successfully but there are some bugs in the RTEMS bbb-i2c.c driver in beagle BSP, as a result of which, the I2C-adaptation driver cannot be used. Currently Christian is working on the bugs in the RTEMS driver. To test the tda work, I have used the ti_i2c driver from the FreeBSD and successfully built the lcd and tda drivers. The driver was tested on a real hardware with a monitor by Christian and the EDID read was successful with the ti_i2c dirver . But there was the missing fdb(frame buffer device) driver that is causing it to fail. The Blocker currently is that there is some issue with the fbd porting and I have posted the non-working patch for review on what to do about it ref: https://lists.rtems.org/pipermail/devel/2019-June/026214.html
After it comes to a working state and the fbd is connected properly, the next step will be to make a sample app to write something to the /dev/fb0 device. Thanks, Vijay >
_______________________________________________ devel mailing list devel@rtems.org http://lists.rtems.org/mailman/listinfo/devel
