Hello everyone! I have been active on the project and had offlist discussions about it with the mentors. To update the devel about the ongoing work I'm writing this status report and planning to write such status reports regularly to devel as most of the discussions are happening offlist with the mentors.
My forked repository for the rtems-libbsd can be found here https://github.com/thelunatic/rtems-libbsd All my work so far is in three branches in my forked repo. The am335x_lcd branch contains the commits for importing and porting the am335x_lcd drivers and the tda19988 branch has all the lcd and tda driver commits. The hdmi framer communicates through the i2c bus and uses the iicbus driver from the freebsd source. Since RTEMS already supports the i2c very nicely in the target board, we have decided to write an adaptation layer of i2c driver that will use the RTEMS i2c driver throught the FreeBSD API. All the imported codes along with the porting commit, which includes the adaptation layer, can be found in the iicbus branch in the above mentioned repository. The adaptation layer is currently in a basic state and it compiles without any warning, to make it work with the FreeBSD API. I also wrote a device tree overlay and applied it throught u-boot to get the device path with the OF_getprop* calls. The overlay device tree source can be found in the following gist https://gist.github.com/thelunatic/70fb08700c28044b779e7649839d9015 I wanted to mention that since I came to know about all the mentors only after the GSoC results were declared, most of my discussions were offlist with Christian. From now on I will CC all the mentors in project-related discussions, to be able to get feedback and advice from all the mentors. Thank you -- vijay
_______________________________________________ devel mailing list devel@rtems.org http://lists.rtems.org/mailman/listinfo/devel
