Hello, The project has progressed and I'm giving a status report of whatever has been done since the last update.
I was working on the i2c-adaptation layer that would work on top of the RTEMS application layer and will connect it to the FreeBSD API. The current status is that the i2c-adaptation layer is working! I have check that it creates a '/dev/iic0' entry and the probe and attach is working properly for all three drivers that are involved, i.e. the iicbus_attach, the iic_attach and the rtems_i2c_attach. I have tested it on the target hardware Beaglebone Black. The next step is to get a working application that will use the rtems_i2c adaptation layer by creating an 'i2c-0' device and using the i2c command to read EEPROM. For this I have already ported the i2c command to RTEMS. What needs to be done now is to get a test application outside libbsd that will use the adaptation layer. For that I have decided to create a separate project (repository) in GitHub and build the application there. I am not sure where should such applications go into rtems. I'm seeking some suggestions from the devel for the location of this application that I'm starting to build, as a test application for the ported drivers. This is the forked branch where all the i2c driver work is there, it is up to day till today and it's tested to be working on BBB. https://github.com/thelunatic/rtems-libbsd/tree/i2c_adaptation the commits might not be very clean now, I'll clean that up before sending to devel. Thank you, Vijay
_______________________________________________ devel mailing list devel@rtems.org http://lists.rtems.org/mailman/listinfo/devel
