On 17/11/26 at 18:28, basti wrote:
it also works in bookworm.
What did you do?
What did you expect?
What happened?
did you mount /boot/firmware?
~# mount | grep /boot/firmware
/dev/mmcblk0p1 on /boot/firmware type vfat
(rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,utf8,errors=remount-ro)
are there any error messages?
post the output of update-initramfs -k all -u
OK I will retry for the *last* time:
1) Edit /etc/default/raspi-firmware-custom:
~# cat <<EOF | tee -a /etc/default/raspi-firmware-custom
>
# Custom changes
gpu_mem=16
> EOF
# Custom changes
gpu_mem=16
2) run update-initramfs -u -k all:
~# update-initramfs -u -k all
update-initramfs: Generating /boot/initrd.img-6.1.0-54-arm64
3) check the log:
~# journalctl --since "2026-11-18 14:00:00" -g update-initramfs
-- No entries --
( I checked the output but I didn't see nothing related )
4) verify that changes was applied to /boot/firmware/config.txt:
~# cat /boot/firmware/config.txt
# Switch the CPU from ARMv7 into ARMv8 (aarch64) mode
arm_control=0x200
enable_uart=1
upstream_kernel=1
kernel=vmlinuz-6.1.0-54-arm64
# For details on the initramfs directive, see
# https://www.raspberrypi.org/forums/viewtopic.php?f=63&t=10532
initramfs initrd.img-6.1.0-54-arm64
The expected result was that the three lines in
"/etc/default/raspi-firmware-custom" they were added at the bottom of
"/boot/firmware/config.txt" after performed the command
"update-initramfs -u -k all".
Kind regards,
--
Franco Martelli