On 15/11/26 at 04:02, basti wrote:
Am 14.11.26 um 16:24 schrieb Franco Martelli:
On 13/11/26 at 17:43, basti wrote:
Have a look at the file '/etc/default/raspi-firmware'.

tail -n 7 /etc/default/raspi-firmware
# Create a file "/etc/default/raspi-firmware-custom" to add custom parameter
# to startup the kernel. Maybe not all options are supported.
# (see https://www.raspberrypi.com/documentation/computers/config_txt.html)
#
# To pass extra arbitrary parameters to the kernel at boot, you can specify
# them in "/etc/default/raspi-extra-cmdline". Keep in mind they should be
# all in a single line, no comments!


Are you providing solution for Debian 12 oldstable on Raspberry Pi 3? Are you on Trixie?

I've already reported as not working "/etc/default/raspi-extra-cmdline" in my email of 2026/11/14 in this thread.

while:
~# LC_ALL=C.UTF-8 ls -l /etc/default/raspi-firmware-custom
-rw-r--r-- 1 root root 67 Nov 13 14:25 /etc/default/raspi-firmware-custom

doesn't work in all the tests performed from 13 November. Here its contents:

~# cat /etc/default/raspi-firmware-custom
gpu_mem=16
dtparam=audio=off
dtoverlay=disable-bt
hdmi_blanking=2

Kind regards,
--
Franco Martelli

Reply via email to