Hello,
tbf, works for me.
root@rpi-ks:~# cat /etc/debian_version
13.7
root@rpi-ks:~# tail -n 3 /boot/firmware/config.txt
# Inserted by /etc/default/raspi-firmware-custom
gpu_mem=16
Do you a 'update-initramfs -k all -u' after create the file?
Am 16.11.26 um 16:39 schrieb Franco Martelli:
On 15/11/26 at 04:02, basti wrote:
Am 14.11.26 um 16:24 schrieb Franco Martelli:
On 13/11/26 at 17:43, basti wrote:
Have a look at the file '/etc/default/raspi-firmware'.
tail -n 7 /etc/default/raspi-firmware
# Create a file "/etc/default/raspi-firmware-custom" to add custom
parameter
# to startup the kernel. Maybe not all options are supported.
# (see https://www.raspberrypi.com/documentation/computers/
config_txt.html)
#
# To pass extra arbitrary parameters to the kernel at boot, you can
specify
# them in "/etc/default/raspi-extra-cmdline". Keep in mind they should be
# all in a single line, no comments!
Are you providing solution for Debian 12 oldstable on Raspberry Pi 3?
Are you on Trixie?
I've already reported as not working "/etc/default/raspi-extra-cmdline"
in my email of 2026/11/14 in this thread.
while:
~# LC_ALL=C.UTF-8 ls -l /etc/default/raspi-firmware-custom
-rw-r--r-- 1 root root 67 Nov 13 14:25 /etc/default/raspi-firmware-custom
doesn't work in all the tests performed from 13 November. Here its
contents:
~# cat /etc/default/raspi-firmware-custom
gpu_mem=16
dtparam=audio=off
dtoverlay=disable-bt
hdmi_blanking=2
Kind regards,