On Wed, 2003-08-27 at 12:40, demslh wrote: > > > sis900.c: v1.08.06 9/24/2002 > > > PCI: Assigned IRQ 11 for device 00:03.0 > > > eth0: Realtek RTL8201 PHY transceiver found at address 1. > > > eth0: Using transceiver found at address 1 as default > > > eth0: SiS 900 PCI Fast Ethernet at 0xd400, IRQ 11, > 00:d0:09:fe:58:6e. > > > [drm] AGP 0.99 on SiS @ 0xd0000000 64MB > > > [drm] Initialized r128 2.2.0 20010917 on minor 0 > > > eth0: Media Link On 100mbps full-duplex > > > > > > ******** > > > eth0 Link encap:Ethernet HWaddr 00:D0:09:FE:58:6E > > > UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 > > > RX packets:125 errors:0 dropped:0 overruns:0 frame:0 > > > TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 > > > collisions:0 txqueuelen:100 > > > RX bytes:15777 (15.4 KiB) TX bytes:0 (0.0 b) > > > Interrupt:11 Base address:0xd400 > > > > > > It looks like your NIC is working, but not picking up an IP address. Do > you use DHCP to give out addresses? i had a problem similar to this when > i compiled my own kernel, because i forgot to select something in the > kernel. this meant that DHCP wouldn't work. trouble is, i have a memory > like a seive, and i cant remember what it was you need. > > try doing > ifconfig eth0 [IP address you want] > > and see if that gets your networking working. > > > Ian
Does not help :-) When I boot off the old Kernel (2.2.20) floppy, the system connects without any problem while booting. I looked at the kernel options but did not find one for DHCP. Was it a part of pppoeconf? I have TCP/IP and other standard options enabled in the kernel. Punit -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
