"Alex V. Toropov" <[EMAIL PROTECTED]> wrote: >> eth0 Link encap:Ethernet HWadrr 00:60:08:31:22:84 >> inet addr:192.168.1.3 Bcast:192.168.1.255 Mask 255.255.255.0 >> UP BROADCAST RUNNING PROMISC MULTICAST MTU:1500 Metric:1 >> RX packets:0 errors:0 dropped:0 overruns:0 frame:0 >> TX packets 203 errors:0 dropped:0 overruns:0 carrier:203 >> Collisions:0 >> Interrupt:10 Base address:0x300 > >Are You sure that ethernet LAN is usable? I mean can any other PC on this >LAN see one another? >If they can then may be some problems with your linux-box LAN Card ?
Yes - the windows-machines can see each other in the windows-network. (Workgroupname Olsen as the domainname at the linux box.) The windows pc's can ping each other, but not the linux. I'm using bnc-cables, and the linux is in the middle. I've tried to change the T's - no effect. The start-up messages show no problems initializing the network-card. (Loading modules ..... vfat smbfs 3c509 at 0x300 tag 1, 10baseT port, address 00 60 08 31 22 84, IRQ 10) (eth0: Setting Rx mode to 1 addresses) Yours Henning ____________________________________________________________________ Get your own FREE, personal Netscape WebMail account today at http://webmail.netscape.com.
