Mark Purcell wrote:
On Sunday 26 April 2009 23:31:20 Ian MacKinnell wrote:
I am experiencing exactly the same problem, and I run a pure testing
(sketch) environment - no sid packages.
Not sure what you mean by sketch. Debian testing is called squeeze.
I am running an en locale too.
Thanks Ian,
Could I ask you to followup with reportbug(1) as that will tell us more about
your environment.
Mark
Yep, it is squeeze.
Reportbug output attached.
hp-check.log (quoted in reportbug's output) claims that I need to
install python-qt4-dbus but that package is already installed on my
system: version 4.4.2-4. I ran "apt-get update" and "apt-get install
python-qt4-dbus" tonight just to check and it reported: "python-qt4-dbus
is already the newest version." I then tried the command recommended in
hp-check.log (i.e. su -c "apt-get install --force-yes -y
python-qt4-dbus") and got the same result ("python-qt4-dbus is already
the newest version").
IanM
Content-Type: text/plain; charset="us-ascii"
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit
From: Ian MacKinnell <ianm...@fastmail.fm>
To: Debian Bug Tracking System <sub...@bugs.debian.org>
Subject: none
Reply-To: Ian MacKinnell <ianm...@fastmail.fm>
X-Debbugs-Cc: none
Package: hplip
Version: 3.9.2-3
Severity: normal
-- Package-specific info:
error: Version: (Not available. CUPS may not be installed or not running.)
error: NOT FOUND! This is a REQUIRED/RUNTIME ONLY dependency. Please make sure
that this dependency is installed before installing or running HPLIP.
HP Linux Imaging and Printing System (ver. 3.9.2)
Dependency/Version Check Utility ver. 14.1
Copyright (c) 2001-8 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
Note: hp-check can be run in three modes:
1. Compile-time check mode (-c or --compile): Use this mode before compiling
the HPLIP supplied tarball (.tar.gz or .run) to determine if the proper
dependencies are installed to successfully
compile HPLIP.
2. Run-time check mode (-r or --run): Use this mode to determine if a distro
supplied package (.deb, .rpm, etc) or an already built HPLIP supplied tarball
has the proper dependencies installed to
successfully run.
3. Both compile- and run-time check mode (-b or --both) (Default): This mode
will check both of the above cases (both compile- and run-time dependencies).
Saving output in log file: hp-check.log
Initializing. Please wait...
---------------
| SYSTEM INFO |
---------------
Basic system information:
Linux ian 2.6.26-2-686 #1 SMP Thu Mar 26 01:08:11 UTC 2009 i686 GNU/Linux
Distribution:
debian testing
HPOJ running?
No, HPOJ is not running (OK).
Checking Python version...
OK, version 2.5.4 installed
Checking PyQt 4.x version...
OK, version 4.4.2 installed.
Checking for CUPS...
Status: scheduler is running
Checking for dbus/python-dbus...
dbus daemon is running.
python-dbus version: 0.83.0
------------------------
| RUNTIME DEPENDENCIES |
------------------------
Checking for dependency: CUPS - Common Unix Printing System...
OK, found.
Checking for dependency: CUPS DDK - CUPS driver development kit...
OK, found.
Checking for dependency: GhostScript - PostScript and PDF language interpreter
and previewer...
OK, found.
Checking for dependency: PIL - Python Imaging Library (required for commandline
scanning with hp-scan)...
OK, found.
Checking for dependency: ppdev - Parallel port support kernel module....
OK, found.
Checking for dependency: PyQt 4- Qt interface for Python (for Qt version 4.x)...
OK, found.
Checking for dependency: PyQt 4 DBus - DBus Support for PyQt4...
To install this dependency, execute this command:
su -c "apt-get install --force-yes -y python-qt4-dbus"
Checking for dependency: Python ctypes - A foreign function library for
Python...
OK, found.
Checking for dependency: Python DBus - Python bindings for DBus...
OK, found.
Checking for dependency: Python XML libraries...
OK, found.
Checking for dependency: Python 2.3 or greater - Required for fax
functionality...
OK, found.
Checking for dependency: Reportlab - PDF library for Python...
OK, found.
Checking for dependency: SANE - Scanning library...
OK, found.
Checking for dependency: scanimage - Shell scanning program...
OK, found.
Checking for dependency: xsane - Graphical scanner frontend for SANE...
OK, found.
----------------------
| HPLIP INSTALLATION |
----------------------
Currently installed HPLIP version...
HPLIP 3.9.2 currently installed in '/usr/share/hplip'.
Current contents of '/etc/hp/hplip.conf' file:
# hplip.conf. Generated from hplip.conf.in by configure.
[hplip]
version=3.9.2
[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/ppd/hpijs/HP
ppdbase=/usr/share/ppd/hpijs
doc=/usr/share/doc/hplip-doc/HTML
icon=no
cupsbackend=/usr/lib/cups/backend
cupsfilter=/usr/lib/cups/filter
drv=/usr/share/cups/drv
# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
pp-build=yes
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
foomatiwarning: Printer is not HPLIP installed. Printers must use the hp: or
hpfax: CUPS backend to function in HPLIP.
warning: Printer is not HPLIP installed. Printers must use the hp: or hpfax:
CUPS backend to function in HPLIP.
error: 4 errors and/or warnings.
c-drv-install=yes
foomatic-ppd-install=no
foomatic-rip-hplip-install=no
internal-tag=3.9.2.49
restricted-build=no
ui-toolkit=qt4
qt3=no
qt4=yes
Current contents of '~/.hplip/hplip.conf' file:
[last_used]
printer =
device_uri = "hp:/net/Photosmart_C5100_series?ip=192.168.1.204"
[commands]
scan = /usr/bin/xsane -V %SANE_URI%
[installation]
version = 3.9.2.49
date_time = 04/27/09 20:31:35
[settings]
systray_visible = @Invalid()
[refresh]
rate = @Variant(\0\0\0\x1e)
enable = false
type = false
[polling]
enable = false
device_list =
interval = 0
-------------------------------
| DISCOVERED PARALLEL DEVICES |
-------------------------------
No devices found.
--------------------------
| DISCOVERED USB DEVICES |
--------------------------
No devices found.
---------------------------------
| INSTALLED CUPS PRINTER QUEUES |
---------------------------------
HP-C5180
--------
Type: Printer
Installed in HPLIP?: Yes, using the hp: CUPS backend.
Device URI: hp:/net/Photosmart_C5100_series?ip=192.168.1.204
PPD: /etc/cups/ppd/HP-C5180.ppd
PPD Description: HP PS c5100 Series hpijs, hpijs 3.9.2.49 - HPLIP 3.9.2
Printer status: printer HP-C5180 is idle. enabled since Sun 14 Oct 2007
15:27:03 EST
Communication status: Good
kyocera
-------
Type: Unknown
Installed in HPLIP?: No, not using the hp: or hpfax: CUPS backend.
Device URI: smb://amanda/kyocera
PPD: /etc/cups/ppd/kyocera.ppd
PPD Description: Kyocera Mita FS-1010
Printer status: printer kyocera is idle. enabled since Wed 14 Feb 2007
22:03:43 EST
PDF
---
Type: Unknown
Installed in HPLIP?: No, not using the hp: or hpfax: CUPS backend.
Device URI: cups-pdf:/
PPD: /etc/cups/ppd/PDF.ppd
PPD Description: Generic CUPS-PDF Printer
Printer status: printer PDF is idle. enabled since Mon 27 Apr 2009 20:06:18 EST
----------------------
| SANE CONFIGURATION |
----------------------
'hpaio' in '/etc/sane.d/dll.conf'...
'hpaio' in '/etc/sane.d/dll.d/hplip'...
OK, found. SANE backend 'hpaio' is properly set up.
Checking output of 'scanimage -L'...
device `v4l:/dev/video0' is a Noname BT848A video ( *** UNKNOWN/GENE virtual
device
device `hpaio:/net/Photosmart_C5100_series?ip=192.168.1.204' is a
Hewlett-Packard Photosmart_C5100_series all-in-one
---------------------
| PYTHON EXTENSIONS |
---------------------
Checking 'cupsext' CUPS extension...
OK, found.
Checking 'pcardext' Photocard extension...
OK, found.
Checking 'hpmudext' I/O extension...
OK, found.
Checking 'scanext' SANE scanning extension...
OK, found.
-----------------
| USB I/O SETUP |
-----------------
Checking for permissions of USB attached printers...
-----------
| SUMMARY |
-----------
Summary of needed commands to run to satisfy missing dependencies:
su -c "apt-get install --force-yes -y python-qt4-dbus"
Please refer to the installation instructions at:
http://hplip.sourceforge.net/install/index.html
Done.
-- System Information:
Debian Release: squeeze/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: i386 (i686)
Kernel: Linux 2.6.26-2-686 (SMP w/2 CPU cores)
Locale: LANG=en_AU, LC_CTYPE=en_AU (charmap=ISO-8859-1)
Shell: /bin/sh linked to /bin/bash
Versions of packages hplip depends on:
ii adduser 3.110 add and remove users and groups
ii coreutils 7.2-1 The GNU core utilities
ii cups 1.3.8-1lenny4.1 Common UNIX Printing System(tm) -
ii hplip-data 3.9.2-3 HP Linux Printing and Imaging - da
ii libc6 2.9-4 GNU C Library: Shared libraries
ii libcups2 1.3.8-1lenny4.1 Common UNIX Printing System(tm) -
ii libdbus-1-3 1.2.12-1 simple interprocess messaging syst
ii libsane 1.0.19-26 API library for scanners
ii libsnmp15 5.4.1~dfsg-12 SNMP (Simple Network Management Pr
ii libssl0.9.8 0.9.8g-16 SSL shared libraries
ii libusb-0.1-4 2:0.1.12-13 userspace USB programming library
ii lsb-base 3.2-22 Linux Standard Base 3.2 init scrip
ii python 2.5.4-2 An interactive high-level object-o
ii python-dbus 0.83.0-1 simple interprocess messaging syst
ii python-imaging 1.1.6-3 Python Imaging Library
Versions of packages hplip recommends:
ii cups-client 1.3.8-1lenny4.1 Common UNIX Printing System(tm) -
ii hpijs 3.9.2-3 HP Linux Printing and Imaging - gs
ii sane-utils 1.0.19-26 API library for scanners -- utilit
Versions of packages hplip suggests:
ii gtklp 1.2.3-1.1 printing tool for CUPS on the GNOM
ii hplip-doc 3.9.2-3 HP Linux Printing and Imaging - do
ii hplip-gui 3.9.2-3 HP Linux Printing and Imaging - GU
pn openprinting-ppds <none> (no description available)
ii xpp 1.5-cvs20050828-1+b2 X Printing Panel
-- no debconf information
