Package: sane-utils Version: 1.0.19~cvs20071213-1 Severity: important I used to scan from the Gnome Desktop, through Gimp with either QuiteInsane, XSane or xsaneimage. It has recently been causing a complete failure of X11, abruptly killing the session without scanning anything. I then tried to reproduce the problem purely with command line interface, with no more result (at least the session is not killed): buradosentaa2:~# export SANE_DEBUG_PIXMA=10 buradosentaa2:~# export PIXMA_EXPERIMENT=10 buradosentaa2:~# scanimage -v -p -d pixma:04A91707_31AABD --source "Automatic Document Feeder" -T [sanei_debug] Setting debug level of pixma to 10. [pixma] pixma version 0.13.1 [pixma] pixma_collect_devices() found Canon PIXMA MP780 at libusb:004:003 [pixma] pixma_open(): Canon PIXMA MP780 [pixma] Work-around for the problem: device doesn't response to the first command. [pixma] OUT T=0.364 len=10 [pixma] 00000000:e9 20 00 00 00 00 00 00 00 00 [pixma] [pixma] IN T=1.367 len=-9 [pixma] ERROR: ETIMEDOUT [pixma] [pixma] Reading response of a dummy command failed: ETIMEDOUT [pixma] BUG:reader_taskid(0) != 0 scanimage: received signal 15 scanimage: trying to stop scanner [pixma] Reader task started [pixma] [pixma] pixma_scan(): start [pixma] line_size=1920 image_size=1683840 channels=3 depth=8 [pixma] dpi=75x75 offset=(0,0) dimension=637x877 [pixma] gamma_table=0x61d840 source=1 [pixma] Reader task id=10445 (forked) scanimage: scanning image of size 637x877 pixels at 24 bits/pixel scanimage: acquiring RGB frame, 8 bits/sample scanimage: reading one scanline, 1911 bytes... FAIL Error: Operation was cancelled [pixma] raw_width=640 raw_height=881 dpi=75 [pixma] OUT T=1.379 len=20 [pixma] 00000000:cf 60 00 00 00 00 00 00 0a 00 01 00 00 00 00 00 [pixma] 00000010:00 00 00 ff [pixma] [pixma] IN T=1.753 len=2 [pixma] 00000000:06 06 [pixma] [pixma] OUT T=1.753 len=10 [pixma] 00000000:f3 20 00 00 00 00 00 00 0c 00 [pixma] [pixma] IN T=1.757 len=14 [pixma] 00000000:06 06 03 00 00 02 03 00 02 03 0f 00 00 e4 [pixma] [pixma] Current status: paper=0 cal=15 lamp=3 [pixma] OUT T=1.772 len=20 [pixma] 00000000:cf 60 00 00 00 00 00 00 0a 00 01 00 00 00 00 00 [pixma] 00000010:00 00 00 ff [pixma] [pixma] IN T=2.153 len=2 [pixma] 00000000:06 06 [pixma] [pixma] OUT T=2.170 len=20 [pixma] 00000000:cf 60 00 00 00 00 00 00 0a 00 01 00 00 20 00 00 [pixma] 00000010:00 00 00 df [pixma] [pixma] IN T=2.548 len=2 [pixma] 00000000:06 06 [pixma] [pixma] OUT T=2.559 len=10 [pixma] 00000000:e9 20 00 00 00 00 00 00 00 00 [pixma] [pixma] IN T=2.563 len=2 [pixma] 00000000:06 06 [pixma] [pixma] OUT T=2.564 len=10 [pixma] 00000000:db 20 00 00 00 00 00 00 00 00 [pixma] [pixma] IN T=2.777 len=2 [pixma] 00000000:06 06 [pixma] [pixma] OUT T=2.777 len=20 [pixma] 00000000:dd 20 00 00 00 00 00 00 0a 00 02 01 00 00 00 00 [pixma] 00000010:00 00 00 fd [pixma] [pixma] IN T=2.780 len=2 [pixma] 00000000:06 06 [pixma] [pixma] OUT T=2.780 len=56 [pixma] 00000000:de 20 00 00 00 00 00 00 2e 00 00 00 00 00 80 4b [pixma] 00000010:80 4b 00 00 00 00 00 00 00 00 00 00 02 80 00 00 [pixma] 00000020:03 71 08 18 00 00 00 00 00 00 ff 00 00 81 00 00 [pixma] 00000030:02 01 00 01 00 00 00 d0 [pixma] [pixma] IN T=2.784 len=2 [pixma] 00000000:06 06 [pixma] [pixma] OUT T=2.786 len=10 [pixma] 00000000:ef 20 00 00 00 00 00 00 00 00 [pixma] [pixma] IN T=2.999 len=2 [pixma] 00000000:06 06 [pixma] [pixma] OUT T=2.999 len=10 [pixma] 00000000:ef 20 00 00 00 00 00 00 00 00 [pixma] [pixma] IN T=3.003 len=2 [pixma] 00000000:15 15 [pixma] [pixma] OUT T=3.003 len=10 [pixma] 00000000:ff 20 00 00 00 00 00 00 10 00 [pixma] [pixma] IN T=3.007 len=18 [pixma] 00000000:06 06 70 00 05 00 00 00 00 06 00 00 00 00 2c 00 [pixma] 00000010:00 59 [pixma] [pixma] OUT T=3.007 len=10 [pixma] 00000000:f3 20 00 00 00 00 00 00 0c 00 [pixma] [pixma] IN T=3.009 len=14 [pixma] 00000000:06 06 03 00 00 02 03 00 02 03 0f 00 00 e4 [pixma] [pixma] Current status: paper=0 cal=15 lamp=3 [pixma] OUT T=3.010 len=20 [pixma] 00000000:cf 60 00 00 00 00 00 00 0a 00 01 00 00 00 00 00 [pixma] 00000010:00 00 00 ff [pixma] [pixma] IN T=3.388 len=2 [pixma] 00000000:06 06 [pixma] [pixma] pixma_read_image():cancelled by software [pixma] Reader task terminated: ECANCELED [pixma] pixma_close(): Canon PIXMA MP780 Complété buradosentaa2:~# lsusb .... Bus 004 Device 003: ID 04a9:1707 Canon, Inc. .... buradosentaa2:~# lspci 00:00.0 Host bridge: ALi Corporation M1695 K8 Northbridge [PCI Express and HyperTransport] 00:01.0 PCI bridge: ALi Corporation PCI Express Root Port 00:02.0 PCI bridge: ALi Corporation PCI Express Root Port 00:04.0 Host bridge: ALi Corporation M1689 K8 Northbridge [Super K8 Single Chip] 00:05.0 PCI bridge: ALi Corporation AGP8X Controller 00:06.0 PCI bridge: ALi Corporation M5249 HTT to PCI Bridge 00:07.0 ISA bridge: ALi Corporation M1563 HyperTransport South Bridge (rev 70) 00:07.1 Bridge: ALi Corporation M7101 Power Management Controller [PMU] 00:08.0 Multimedia audio controller: ALi Corporation M5455 PCI AC-Link Controller Audio Device (rev 20) 00:11.0 Ethernet controller: ALi Corporation ULi 1689,1573 integrated ethernet. (rev 40) 00:12.0 IDE interface: ALi Corporation M5229 IDE (rev c7) 00:12.1 Mass storage controller: ALi Corporation ULi 5289 SATA (rev 10) 00:13.0 USB Controller: ALi Corporation USB 1.1 Controller (rev 03) 00:13.1 USB Controller: ALi Corporation USB 1.1 Controller (rev 03) 00:13.2 USB Controller: ALi Corporation USB 1.1 Controller (rev 03) 00:13.3 USB Controller: ALi Corporation USB 2.0 Controller (rev 01) 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 03:00.0 VGA compatible controller: ATI Technologies Inc RV280 [Radeon 9200 SE] (rev 01) 03:00.1 Display controller: ATI Technologies Inc RV280 [Radeon 9200 SE] (Secondary) (rev 01) 04:05.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11) 04:05.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11) 04:06.0 Ethernet controller: D-Link System Inc DGE-530T Gigabit Ethernet Adapter (rev 11) (rev 11) 04:07.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host Controller (rev 46)
(the same behavior was observed with the more recent 2.6.22-3-amd64 kernel as well) Best regards. -- System Information: Debian Release: lenny/sid APT prefers testing APT policy: (990, 'testing'), (500, 'unstable') Architecture: amd64 (x86_64) Kernel: Linux 2.6.22-2-amd64 (SMP w/2 CPU cores) Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages sane-utils depends on: ii adduser 3.105 add and remove users and groups ii libc6 2.7-5 GNU C Library: Shared libraries ii libieee1284-3 0.2.11-3 cross-platform library for paralle ii libjpeg62 6b-14 The Independent JPEG Group's JPEG ii libsane 1.0.19~cvs20071213-1 API library for scanners ii libtiff4 3.8.2-7 Tag Image File Format (TIFF) libra ii libusb-0.1-4 2:0.1.12-8 userspace USB programming library ii zlib1g 1:1.2.3.3.dfsg-8 compression library - runtime sane-utils recommends no packages. -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
