Your message dated Sun, 06 Nov 2022 00:06:44 +0000
with message-id <e1ortbu-00f1ej...@fasolo.debian.org>
and subject line Bug#977832: fixed in fai 6.0~alpha21
has caused the Debian Bug report #977832,
regarding fai-setup-storage: setup-storage fails if old disk setup contains a
VG with plus sign in its name
to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.
(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact ow...@bugs.debian.org
immediately.)
--
977832: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=977832
Debian Bug Tracking System
Contact ow...@bugs.debian.org with problems
--- Begin Message ---
Package: fai-setup-storage
Version: 5.9.4
Severity: normal
Dear Maintainer,
setup-storage fails to setup a disk if the disk already contains a VG with a
plus sign in its name.
Minimized disk setup that causes the issue:
```
$ parted --script /dev/loop0 print free
Model: Loopback device (loopback)
Disk /dev/loop2: 128MB
Sector size (logical/physical): 512B/512B
Partition Table: gpt
Disk Flags:
Number Start End Size File system Name Flags
1 17.4kB 128MB 128MB primary lvm
$ lsblk /dev/loop0
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
loop2 7:2 0 122.1M 0 loop
└─loop2p1 259:7 0 122M 0 part
└─old_vg-a+b 253:5 0 120M 0 lvm
```
Minimized disk config that reproduces the issue:
```
disk_config disk1 disklabel:gpt
primary - 0- - -
disk_config lvm
```
The setup-storage error message I get for this combination:
```
Cannot satisfy pre-depends for lvremove -f /dev/old_vg/a+b: wipefs_old_vg/a+b
-- system left untouched.
```
The impact is that setup-storage can't resetup the disk.
If I remove the `+` from `a+b` then the issue doesn't happen.
If I remove the `disk_config lvm` line then the issue doesn't happen.
We've encountered this issue with existing machines that have been previously
installed with Debian Installer.
Best,
Michael Schaller
setup-storage debug output:
```
disklist: loop0
Starting setup-storage 2.3
Using config file: <redacted>
Input was:
disk_config disk1 disklabel:gpt
primary - 0- - -
disk_config lvm
(CMD) parted -s /dev/loop0 unit TiB print 1> /tmp/DawnyWaUqw 2> /tmp/1CdIC7E2lZ
Executing: parted -s /dev/loop0 unit TiB print
(STDOUT) Model: Loopback device (loopback)
(STDOUT) Disk /dev/loop0: 0.00TiB
(STDOUT) Sector size (logical/physical): 512B/512B
(STDOUT) Partition Table: gpt
(STDOUT) Disk Flags:
(STDOUT)
(STDOUT) Number Start End Size File system Name Flags
(STDOUT) 1 0.00TiB 0.00TiB 0.00TiB primary lvm
(STDOUT)
(CMD) parted -s /dev/loop0 unit B print free 1> /tmp/6y8bZKl8j9 2>
/tmp/cRw5eJZBPo
Executing: parted -s /dev/loop0 unit B print free
(STDOUT) Model: Loopback device (loopback)
(STDOUT) Disk /dev/loop0: 128000000B
(STDOUT) Sector size (logical/physical): 512B/512B
(STDOUT) Partition Table: gpt
(STDOUT) Disk Flags:
(STDOUT)
(STDOUT) Number Start End Size File system Name Flags
(STDOUT) 1 17408B 127983103B 127965696B primary lvm
(STDOUT)
(CMD) parted -s /dev/loop0 unit chs print free 1> /tmp/JpcgqNuRbJ 2>
/tmp/fAQl87C8ra
Executing: parted -s /dev/loop0 unit chs print free
(STDOUT) Model: Loopback device (loopback)
(STDOUT) Disk /dev/loop0: 490,49,1
(STDOUT) Sector size (logical/physical): 512B/512B
(STDOUT) BIOS cylinder,head,sector geometry: 490,255,2. Each cylinder is 261kB.
(STDOUT) Partition Table: gpt
(STDOUT) Disk Flags:
(STDOUT)
(STDOUT) Number Start End File system Name Flags
(STDOUT) 1 0,17,0 490,33,0 primary lvm
(STDOUT)
Ignoring volume group: dhcp-100-105-1-216-vg
Current disk layout in %current_config
$VAR1 = {
'/dev/loop0' => {
'sector_size' => '512',
'bios_sectors_per_track' => '2',
'size' => '128000000',
'partitions' => {
'1' => {
'flags' => 'lvm',
'filesystem' => '',
'count_byte' =>
'127965696',
'is_extended' => 0,
'begin_byte' => '17408',
'end_byte' => '127983103'
}
},
'begin_byte' => 0,
'bios_cylinders' => '490',
'bios_heads' => '255',
'disklabel' => 'gpt',
'end_byte' => 127999999
}
};
Current LVM layout in %current_lvm_config
$VAR1 = {
'old_vg' => {
'physical_volumes' => [
'/dev/loop0p1'
],
'size' => '120.000839233398',
'volumes' => {
'a+b' => {
'size' => '120.000839233398'
}
}
}
};
Current RAID layout in %current_raid_config
$VAR1 = {};
Current device tree in %current_dev_children
$VAR1 = {
'VG_old_vg' => [
'/dev/old_vg/a+b'
],
'/dev/loop0p1' => [
'VG_old_vg'
],
'/dev/loop0' => [
'/dev/loop0p1'
]
};
Desired disk layout in %FAI::configs
$VAR1 = {
'VG_--ANY--' => {
'opts_all' => {},
'fstabkey' => 'device'
},
'PHY_/dev/loop0' => {
'partitions' => {
'1' => {
'encrypt' => 0,
'start_byte' =>
1048576,
'mountpoint' => '-',
'filesystem' => '-',
'size' => {
'always_format' => 0,
'extended' => 0,
'eff_size' => 126934528,
'resize'
=> 0,
'range'
=> '126934528-126934528',
'preserve' => 0
},
'mount_options' =>
'-',
'end_byte' =>
127983103
}
},
'bootable' => -1,
'fstabkey' => 'device',
'preserveparts' => 0,
'disklabel' => 'gpt',
'opts_all' => {},
'virtual' => 0
}
};
Desired device tree in %FAI::dev_children
$VAR1 = {
'/dev/loop0' => [
'/dev/loop0p1'
]
};
Erased devices: /dev/loop0p1
Trying to add CMD: true
PRE:
POST: exist_/dev/loop0
Trying to add CMD: wipefs -af /dev/loop0p1
PRE: exist_/dev/loop0,self_cleared_VG_old_vg
POST: wipefs_/dev/loop0p1
Trying to add CMD: true
PRE: exist_/dev/loop0,self_cleared_VG_old_vg,wipefs_/dev/loop0p1
POST: cleared1_/dev/loop0
Trying to add CMD: parted -s /dev/loop0 mklabel gpt
PRE: cleared1_/dev/loop0
POST: cleared2_/dev/loop0
Trying to add CMD: parted -s /dev/loop0 mkpart primary "" 1048576B 127983103B
PRE: cleared2_/dev/loop0
POST: prep2_/dev/loop0p1
Trying to add CMD: true
PRE: prep2_/dev/loop0p1
POST: exist_/dev/loop0p1
Trying to add CMD: vgchange -a n old_vg
PRE: self_cleared_/dev/old_vg/a+b
POST: vgchange_a_n_VG_old_vg
Trying to add CMD: vgchange -a y old_vg
PRE:
POST: pre_wipe_old_vg
Trying to add CMD: wipefs -a /dev/old_vg/a+b
PRE: pre_wipe_old_vg,
POST: wipefs_old_vg/a+b
Trying to add CMD: lvremove -f /dev/old_vg/a+b
PRE: wipefs_old_vg/a+b
POST: lv_rm_old_vg/a+b,self_cleared_/dev/old_vg/a+b
Trying to add CMD: vgremove old_vg
PRE: vgchange_a_n_VG_old_vg,lv_rm_old_vg/a+b
POST: vg_removed_old_vg
Trying to add CMD: pvremove /dev/loop0p1
PRE: vg_removed_old_vg
POST: pvremove_old_vg
Trying to add CMD: wipefs -af /dev/loop0p1
PRE: pvremove_old_vg
POST: pv_sigs_removed_wipe_/dev/loop0p1_old_vg
Trying to add CMD: true
PRE: pvremove_old_vg,pv_sigs_removed_wipe_/dev/loop0p1_old_vg
POST: pv_sigs_removed_old_vg
Trying to add CMD: true
PRE: vgchange_a_n_VG_old_vg,pv_sigs_removed_old_vg,self_cleared_/dev/old_vg/a+b
POST: self_cleared_VG_old_vg
Trying to add CMD: true
PRE: cleared2_/dev/loop0,exist_/dev/loop0p1
POST: pt_complete_/dev/loop0
Trying to add CMD: wipefs -af /dev/loop0p1
PRE: exist_/dev/loop0,self_cleared_VG_old_vg
POST: wipefs_/dev/loop0p1
Trying to add CMD: true
PRE: exist_/dev/loop0,self_cleared_VG_old_vg,wipefs_/dev/loop0p1
POST: cleared1_/dev/loop0
Trying to add CMD: parted -s /dev/loop0 mklabel gpt
PRE: cleared1_/dev/loop0
POST: cleared2_/dev/loop0
Trying to add CMD: parted -s /dev/loop0 mkpart primary "" 1048576B 127983103B
PRE: cleared2_/dev/loop0
POST: prep2_/dev/loop0p1
Trying to add CMD: true
PRE: prep2_/dev/loop0p1
POST: exist_/dev/loop0p1
Trying to add CMD: vgchange -a n old_vg
PRE: self_cleared_/dev/old_vg/a+b
POST: vgchange_a_n_VG_old_vg
Trying to add CMD: lvremove -f /dev/old_vg/a+b
PRE: wipefs_old_vg/a+b
POST: lv_rm_old_vg/a+b,self_cleared_/dev/old_vg/a+b
Cannot satisfy pre-depends for lvremove -f /dev/old_vg/a+b: wipefs_old_vg/a+b
-- system left untouched.
```
--- End Message ---
--- Begin Message ---
Source: fai
Source-Version: 6.0~alpha21
Done: Thomas Lange <la...@debian.org>
We believe that the bug you reported is fixed in the latest version of
fai, which is due to be installed in the Debian FTP archive.
A summary of the changes between this version and the previous one is
attached.
Thank you for reporting the bug, which will now be closed. If you
have further comments please address them to 977...@bugs.debian.org,
and the maintainer will reopen the bug report if appropriate.
Debian distribution maintenance software
pp.
Thomas Lange <la...@debian.org> (supplier of updated fai package)
(This message was generated automatically at their request; if you
believe that there is a problem with it please contact the archive
administrators by mailing ftpmas...@ftp-master.debian.org)
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA256
Format: 1.8
Date: Tue, 01 Nov 2022 10:35:51 +0100
Source: fai
Architecture: source
Version: 6.0~alpha21
Distribution: experimental
Urgency: low
Maintainer: Thomas Lange <la...@debian.org>
Changed-By: Thomas Lange <la...@debian.org>
Closes: 844377 951659 977832 985303 987779 989547 990211 990633 999739 1000572
1005745 1006847 1010593 1010906 1011642 1020976
Changes:
fai (6.0~alpha21) experimental; urgency=low
.
[ Thomas Lange ]
* fai-do-scripts: write output of all scripts to scripts.log,
remove code for old cfengine versions (1 and 2)
* fai-make-nfsroot: drop support for .asc files, use only .gpg
* add autopkgtest
* install_packages: add release=<name>
feature, Closes: #844377, add pacman support
* fetch-basefile: use curl instead of lftp for downloading
* Commands.pm: special handling of nvme devices, Closes: #999739, quote
variables, Closes: #977832, remove old code need by old version of
mkfs.btrfs and lvcreate
* fai-mk-network: usie iproute commands instead of brctl
* fai-make-nfsroot: add dracut modul network-legacy, Closes: #1010906
do not kill dhclient, Closes: #987779, drop support for dracut < 049,
patch udev rule of lvm for bullseye, include empty machine-id into
base.tar
* Exec.pm: better error message, Closes: #1005745
* fcopy: handle broken symlinks, Closes: #985303
* fai-chboot: add variable substitution when coping a template, add
option -a
* fai-class: use of .source scripts now emits an error
* fai-kvm: add -M for creating NVMe devices
* fai-mirror: use only first line of bpo in sources.list,
Closes: #1006847, print number of packages inside the mirror
* fai-diskimage: call losetup with -P, Closes: #1010593, do not remove
VGs, deactivate them, Closes: #990633, add option -c, print error if
umount fails, increase number of tries
* fai-cd: set TMPDIR for chroot, Closes: #1000572
* fai-setup: create ECDSA keys
* Fstab.pm: support tmpfs size -, this uses the system default size for
tmpfs, Closes: #951659
* setup-storage: add support for fstabkey:partlabel and
fstabkey:partuuid, remove crypto keyfile after use
* enhance disk_config format for partition label support
* ftar: add support for zstd
* fai: check if unshare can be used, Closes: #989547
use only IPv4 address as hostname
remove code for deprecated taskname prepareapt
* watch: update to version 4, use new url
* install_packages: parse apt-cache output, Closes: #990211
* subroutines: umount tmpfs if config space was downloaded via http,
Closes: #1011642
* task_sysinfo: print machine readable partition information, do not
call commands that modify the system if no run in FAI environment,
print battery information
* subroutines: add help functions:
ctam (Chroot TArget Mount pseudo filesystems)
ctau (Chroot TArget Umount)
ctai (Chroot TArget Into)
rm_target (remount /target read-write)
* NFSROOT: cleanup package list, add cryptsetup
* update my email address
* mk-basefile: remove /var/lib/dbus/machine-id, use zstd instead of gzip
* simple/examples: use fai-link and fai-sed instead of ln and sed,
remove cryptsetup passphrase from logs, use class ROCKY instead of
CENTOS, update Ubuntu support to 22.04, add CLOUD_EFI, use ext4 for
/boot in LVM examples
* get-boot-info: set NIC1 even if no network is used during installation
.
[ Mike Gabriel ]
* fai-abort:give job control to bash, Closes: #1020976
.
[ Juri Grabowski ]
* install_packages: add support for alpine Linux apk and
Archlinux pacman
.
[ Guido Günther ]
* subroutines: allow one to pass a debootstrap script in FAI_DEBOOTSTRAP
.
[ Christian Meyer ]
* fai-setup: add ECDSA-key to known_hosts
.
[ Aki Tuomi ]
* check-cross-arch: fail on errors and unbound variables
.
[ Hannes Eberhardt ]
* package_config/ROCKY: update EFI packages
Checksums-Sha1:
674897c217fddb8ecb8d60988b11a6d5003291bf 2094 fai_6.0~alpha21.dsc
dadbce601b35d10861555016eafd1f2dc3ad57f6 292776 fai_6.0~alpha21.tar.xz
52ce7e0ca0b47abff0eab60f3badcd3370e74525 16335 fai_6.0~alpha21_amd64.buildinfo
Checksums-Sha256:
4738945c7c375c4682740044b614ccbd830e3a93ba0523390e8397c404b1493b 2094
fai_6.0~alpha21.dsc
50b7f48d475beab3f951ca69a66c5a6c9dba51b33ee0449dd522c2c75a349d0c 292776
fai_6.0~alpha21.tar.xz
47db447a69cd91715b73597518f08fbd0a058dbd10b56588755130c3ff76e7e1 16335
fai_6.0~alpha21_amd64.buildinfo
Files:
5308cd37843e9d773746bec06312fd05 2094 admin optional fai_6.0~alpha21.dsc
6979444dd9ede59d41a4b4a6f49ff480 292776 admin optional fai_6.0~alpha21.tar.xz
7e616c1142ea7e1d70fbdc57d4c09db5 16335 admin optional
fai_6.0~alpha21_amd64.buildinfo
-----BEGIN PGP SIGNATURE-----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=K803
-----END PGP SIGNATURE-----
--- End Message ---
