Thank you very very very much for your answer and your help!!! I changed uSD file system to EXT4 and after that i tried to write debian os image on my uSD with Etcher and it did without error, after that, i plug uSD on BBB and i holded down S2 button and plug BBB to lap top with USB cable, after 2 minute beaglebone drive appeared and the notification "beaglebone getting started" was shown!!
On Saturday, June 29, 2019 at 7:46:32 AM UTC+4:30, Dennis Lee Bieber wrote: > > On Fri, 28 Jun 2019 08:08:55 -0700 (PDT), > [email protected] <javascript:> declaimed the > following: > > >i tried but i'm faild again. i could write any os image for example > rasbian > >on uSD successfully, but i couldn't write debian for BBB. > > > > Raspbian is a version of Debian customized for the RPi -- and > shouldn't > work on a BBB. Putting pure Debian on an RPi is tricky, as one needs a > custom bootloader https://wiki.debian.org/RaspberryPi Also -- RPi > (Raspbian) images are configured to be /copied/ into a /FAT/ formatted SD > card; when booted, they reconfigure the card with a small FAT boot > partition and install the rest of the operating system into an EXT4 > partition they create that uses the rest of the card (I've just updated > two > SD cards for Raspbian "Buster" [pre-release -- the RPi 4 needs Buster, but > Debian hasn't formally released it yet, so it is a "testing" archive]). > > BBB Debian images do NOT GO ON FAT PARTITIONS. {Very old images > DID > have a FAT partition, but that is now emulated} Etcher (or other) does a > low-level overwrite of the entire card, making it a Linux EXT# format and > that format is not understood by Windows... Once Etcher completes, the > card > will NOT be recognizable by a Windows computer (and may not be recognized > by a Linux computer if that computer expects to find a FAT format on SD > cards). NOTHING IS WRONG WITH THE CARD AT THIS STAGE UNLESS ETCHER REPORTS > AN ERROR. > > You say "couldn't write debian for BBB" but you never state any > exact > error message. Did Etcher complete or did IT report a failure. IGNORE any > Windows message from trying to open/explore the SD card; once written by > Etcher is is not usable by Windows. > > What does the BBB do after you install the SD card and reboot? > What > does it do if you hold down the boot select button and /then/ connect the > power? What do the BBB LEDs do? > > > > > -- > Wulfraed Dennis Lee Bieber AF6VN > [email protected] <javascript:> > http://wlfraed.microdiversity.freeddns.org/ > > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/5a339b59-cc5e-4e09-b247-f3d862d21f8e%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
